Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.

Download or read book Wide Bandgap Based Devices written by Farid Medjdoub and published by MDPI. This book was released on 2021-05-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices

Download or read book Gallium Nitride Power Devices written by Hongyu Yu and published by CRC Press. This book was released on 2017-07-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaN is considered the most promising material candidate in next-generation power device applications, owing to its unique material properties, for example, bandgap, high breakdown field, and high electron mobility. Therefore, GaN power device technologies are listed as the top priority to be developed in many countries, including the United States, the European Union, Japan, and China. This book presents a comprehensive overview of GaN power device technologies, for example, material growth, property analysis, device structure design, fabrication process, reliability, failure analysis, and packaging. It provides useful information to both students and researchers in academic and related industries working on GaN power devices. GaN wafer growth technology is from Enkris Semiconductor, currently one of the leading players in commercial GaN wafers. Chapters 3 and 7, on the GaN transistor fabrication process and GaN vertical power devices, are edited by Dr. Zhihong Liu, who has been working on GaN devices for more than ten years. Chapters 2 and 5, on the characteristics of polarization effects and the original demonstration of AlGaN/GaN heterojunction field-effect transistors, are written by researchers from Southwest Jiaotong University. Chapters 6, 8, and 9, on surface passivation, reliability, and package technologies, are edited by a group of researchers from the Southern University of Science and Technology of China.

Download or read book GaN based Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2004 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique materials properties of GaN-based semiconductors havestimulated a great deal of interest in research and developmentregarding nitride materials growth and optoelectronic andnitride-based electronic devices. High electron mobility andsaturation velocity, high sheet carrier concentration atheterojunction interfaces, high breakdown field, and low thermalimpedance of GaN-based films grown over SiC or bulk AlN substratesmake nitride-based electronic devices very promising.

Download or read book Low Temperature Electronics written by Edmundo A. Gutierrez-D and published by Elsevier. This book was released on 2000-10-25 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Temperature Electronics: Physics, Devices, Circuits, and Applications summarizes the recent advances in cryoelectronics starting from the fundamentals in physics and semiconductor devices to electronic systems, hybrid superconductor-semiconductor technologies, photonic devices, cryocoolers and thermal management. Furthermore, this book provides an exploration of the currently available theory, research, and technologies related to cryoelectronics, including treatment of the solid state physical properties of the materials used in these systems. Current applications are found in infrared systems, satellite communications and medical equipment. There are opportunities to expand in newer fields such as wireless and mobile communications, computers, and measurement and scientific equipment. Low temperature operations can offer certain advantages such as higher operational speeds, lower power dissipation, shorter signal transmission times, higher semiconductor and metal thermal conductivities, and improved digital and analog circuit performance.The computer, telecommunication, and cellular phone market is pushing the semiconductor industry towards the development of very aggressive device and integrated circuit fabrication technologies. This is taking these technologies towards the physical miniaturization limit, where quantum effects and fabrication costs are becoming a technological and economical barrier for further development. In view of these limitations, operation of semiconductor devices and circuits at low temperature (cryogenic temperature) is studied in this book.* It is a book intended for a wide audience: students, scientists, technology development engineers, private companies, universities, etc.* It contains information which is for the first time available as an all-in-one source; Interdisciplinary material is arranged and made compatible in this book* It is a must as reference source

Download or read book Energy Systems Drives and Automations written by Afzal Sikander and published by Springer. This book was released on 2021-09-01 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected research papers presented at the Second International Conference on Energy Systems, Drives and Automations (ESDA 2019), held in Kolkata on 28–29 December 2019. It covers a broad range of topics in the fields of renewable energy, power management, drive systems for electrical machines and automation. Also discussing a variety of related tools and techniques, the book offers a valuable resource for researchers, professionals and students in electrical and mechanical engineering disciplines.

Download or read book State of the Art Program on Compound Semiconductors 45 SOTAPOCS 45 and Wide Bandgap Semiconductor Materials and Devices 7 written by F. Ren and published by The Electrochemical Society. This book was released on 2006 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers from two symposia: State of the Art Program on Compound Semiconductors 45 and Wide Bandgap Semiconductor Materials and Devices VII.

Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.

Download or read book Gallium Nitride Electronics written by Rüdiger Quay and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on nearly a decade of materials and electronics research at the leading research institution on the nitride topic in Europe. It is a comprehensive monograph and tutorial that will be of interest to graduate students of electrical engineering, communication engineering, and physics; to materials, device, and circuit engineers in research and industry; to all scientists with a general interest in advanced electronics.

Download or read book VLSI Design and Test written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2017-12-21 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on VLSI Design and Test, VDAT 2017, held in Roorkee, India, in June/July 2017. The 48 full papers presented together with 27 short papers were carefully reviewed and selected from 246 submissions. The papers were organized in topical sections named: digital design; analog/mixed signal; VLSI testing; devices and technology; VLSI architectures; emerging technologies and memory; system design; low power design and test; RF circuits; architecture and CAD; and design verification.

Download or read book Biosensors Recent Advances and Future Challenges written by Paolo Bollella and published by MDPI. This book was released on 2021-01-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is devoted to all aspects of biosensing in a very broad definition, including, but not limited to, biomolecular composition used in biosensors (e.g., biocatalytic enzymes, DNAzymes, abiotic nanospecies with biocatalytic features, bioreceptors, DNA/RNA, aptasensors, etc.), physical signal transduction mechanisms (e.g., electrochemical, optical, magnetic, etc.), engineering of different biosensing platforms, operation of biosensors in vitro and in vivo (implantable or wearable devices), self-powered biosensors, etc. The biosensors can be represented with analogue devices measuring concentrations of analytes and binary devices operating in the YES/NO format, possibly with logical processing of input signals. Furthermore, the book is aimed at attracting young scientists and introducing them to the field, while providing newcomers with an enormous collection of literature references.

Download or read book Advanced High Speed Devices written by Michael S Shur and published by World Scientific. This book was released on 2009-12-10 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Speed Devices covers five areas of advanced device technology: terahertz and high speed electronics, ultraviolet emitters and detectors, advanced III-V field effect transistors, III-N materials and devices, and SiC devices. These emerging areas have attracted a lot of attention and the up-to-date results presented in the book will be of interest to most device and electronics engineers and scientists. The contributors range from prominent academics, such as Professor Lester Eastman, to key US Government scientists, such as Dr Michael Wraback.

Download or read book GaN and Related Materials written by Stephen J. Pearton and published by CRC Press. This book was released on 2021-10-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents views on current developments in heat and mass transfer research related to the modern development of heat exchangers. Devotes special attention to the different modes of heat and mass transfer mechanisms in relation to the new development of heat exchangers design. Dedicates particular attention to the future needs and demands for further development in heat and mass transfer. GaN and related materials are attracting tremendous interest for their applications to high-density optical data storage, blue/green diode lasers and LEDs, high-temperature electronics for high-power microwave applications, electronics for aerospace and automobiles, and stable passivation films for semiconductors. In addition, there is great scientific interest in the nitrides, because they appear to form the first semiconductor system in which extended defects do not severely affect the optical properties of devices. This series provides a forum for the latest research in this rapidly-changing field, offering readers a basic understanding of new developments in recent research. Series volumes feature a balance between original theoretical and experimental research in basic physics, device physics, novel materials and quantum structures, processing, and systems.

Download or read book III nitride Devices and Nanoengineering written by Zhe Chuan Feng and published by World Scientific. This book was released on 2008 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices, nanoscale science and technologies based on GaN and related materials, have achieved great developments in recent years. New GaN-based devices such as UV detectors, fast p-HEMT and microwave devices are developed far more superior than other semiconductor materials-based devices.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory and experiment.This book is an invaluable resource for device design and processing engineers, material growers and evaluators, postgraduates and scientists as well as newcomers in the GaN field.