Download or read book Reliability Stress Analysis and Failure Prevention Methods in Mechanical Design written by Wayne D. Milestone and published by . This book was released on 1980 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Growth written by Panel on Reliability Growth Methods for Defense Systems and published by National Academy Press. This book was released on 2015-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.
Download or read book Reliability Stress Analysis and Failure Prevention 1993 written by Richard J. Schaller and published by . This book was released on 1993 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with optimization, reliability and safety techniques for structures, their design and failure analysis, fracture mechanics and stress analysis, this volume comprises papers of the Biennial Conference on [title] held in Albuquerque, N.M., September 19-22, 1993. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Mechanical Engineers Handbook Volume 2 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of electronics, MEMS, and instrumentation and control in mechanical engineering This second volume of Mechanical Engineers' Handbook covers electronics, MEMS, and instrumentation and control, giving you accessible and in-depth access to the topics you'll encounter in the discipline: computer-aided design, product design for manufacturing and assembly, design optimization, total quality management in mechanical system design, reliability in the mechanical design process for sustainability, life-cycle design, design for remanufacturing processes, signal processing, data acquisition and display systems, and much more. The book provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations you'll find in other handbooks. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering anywhere in four interrelated books Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels will find Mechanical Engineers' Handbook, Volume 2 an excellent resource they can turn to for the basics of electronics, MEMS, and instrumentation and control.
Download or read book Reliability Design of Mechanical Systems written by Seongwoo Woo and published by Springer. This book was released on 2019-07-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.
Download or read book Reliability Theory and Its Application in Structural and Soil Mechanics written by P. Thoft-Christensen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings contain lectures and short papers presented at the NATO Advanced Study Institute on »Reliability Theory and Its Application in Structural and Soil Me chanics», Bornholm, Denmark, August 31 -September 9,1982. The proceedings are organized in two parts. The first part contains 12 papers by the invited lecturers and the second part contains 23 papers by participants plus one paper from an invited lecturer (la~e arrival). The Institute dealt with specific topics on application of modem reliability theories in structural engineering and soil mechanics. Both fundamental theory and more ad vanced theory were covered. Lecture courses were followed by tutorial and summary discussions with active participation of those attending the Institute. Special lectures of topical subjects were given by a number of invited speake~, leading to plenary dis cussions and summary statements on important aspects of application of modem .re liability theory in structural engineering and soil mechanics. A great number of the participants presented brief reports of their own research activities.
Download or read book Failure Analysis and Prevention written by Aidy Ali and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancement methods used in analysing the root cause of engineering failures and the proactive suggestion for future failure prevention. The techniques used especially non-destructive testing such X-ray are well described. The failure analysis covers materials for metal and composites for various applications in mechanical, civil and electrical applications. The modes of failures that are well explained include fracture, fatigue, corrosion and high-temperature failure mechanisms. The administrative part of failures is also presented in the chapter of failure rate analysis. The book will bring you on a tour on how to apply mechanical, electrical and civil engineering fundamental concepts and to understand the prediction of root cause of failures. The topics explained comprehensively the reliable test that one should perform in order to investigate the cause of machines, component or material failures at the macroscopic and microscopic level. I hope the material is not too theoretical and you find the case study, the analysis will assist you in tackling your own failure investigation case.
Download or read book Reliability Stress Analysis and Failure Prevention Issues in Adhesive and Bolted Connections written by Erol Sancaktar and published by . This book was released on 1999 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the 16 papers presented at the November 1999 symposium. The topics include temperature distribution in a VLSI chip due to dynamic power density, the strength of joints combining adhesives with bolts, optimization of adhesively bonded single lap joints by adhered notching, and estimation of
Download or read book Failure of Materials in Mechanical Design written by Jack A. Collins and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Edition, covers the basic principles of failure of metallic and non-metallic materials in mechanical design applications. Updated to include new developments on fracture mechanics, including both linear-elastic and elastic-plastic mechanics. Contains new material on strain and crack development and behavior. Emphasizes the potential for mechanical failure brought about by the stresses, strains and energy transfers in machine parts that result from the forces, deflections and energy inputs applied.
Download or read book Reliability Stress Analysis and Failure Prevention Issues in Adhesively Bonded and Bolted Joints Composites Design written by Erol Sancaktar and published by . This book was released on 1997 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses some of the problems with the concentration of stress that are arising with the increased use of adhesives to hold products together, particularly but not exclusively those made of composite materials. Some bolted joints are also considered. Among the 16 topics are the three-level optimiza
Download or read book Reliability Stress Analysis and Failure Prevention Aspects of Adhesive and Bolted Joints Rubber Components Composite Springs written by Erol Sancaktar and published by . This book was released on 1998 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprises 15 contributions from the 1998 International Mechanical Engineering Congress and Exposition. Representative paper topics include performance prediction of elastomeric gasket materials by compression stress relaxation; the damping characteristics of machine structures assembled by bonding; stress analysis of bolted circular flanged joints with tap bolts; and proper selection of auxiliary heat source for reducing thermal residual stresses during the welding process. No subject index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Safety Factors and Reliability Friends or Foes written by Isaac Elishakoff and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Have you ever wondered where the safety factors come from? Why is it that deterministic analysis has reached a very sophisticated level, but in the end empirical factors are still needed? Is there a way to select them, rather than assigning them arbitrarily as is often done? This book clearly shows that safety factors are closely related with the reliability of structures, giving yet another demonstration of Albert Einstein's maxim that "It is incomprehensible that Nature is comprehensible". The book shows that the safety factors are much more comprehensible if they are seen in a probabilistic context. Several definitions of the safety factors are given, analytical results on insightful numbers are presented, nonprobabilistic safety factors are shown, as well as their estimates derived by the inequalities of Bienayme, Markov, Chebushev and Camp-Meidell. A special chapter is devoted to important contributions by Japanese experts. This volume will help to critically re-think the issue of safety factors, which can create a false feeling of security. The deterministic paradigm can be enhanced by incorporating probabilistic concepts wisely where they are needed without treating all variables as probabilistic ones. The book shows that there is a need of their integration rather than separation. This book is intended for engineers, graduate students, lecturers and researchers.
Download or read book Reliability Stress Analysis and Failure Prevention written by Thomas H. Service and published by . This book was released on 1991 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Stress Analysis and Failure Prevention Issues in Emerging Technologies and Materials written by Erol Sancaktar and published by . This book was released on 1995 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the use of finite element analysis and other analytic techniques to deal with the complex states of stress that effect such advanced materials as polymers, composites, adhesives, and piezoelectric materials, especially when they are applied in such critical areas as aerospace and aeronauti
Download or read book Application of Structural Systems Reliability Theory written by Palle Thoft-Christensen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades more and more universities offer courses on modern structural reliability theory. A course on structural reliability theory is now a natural part of the curri culum for mechanical and structural engineering students. As a result of this, a number of textbooks have been published in this decade. In PlOst of these books it is shown how the reliability of single structural members can be evaluated in a rational way. The methods used are usually so-called level 2 methods, i. e. methods involving certain approximate iter ative calculations to obtain an approximate value of the probability of failure of the struc tural members. In these methods the joint probability distribution of relevant variables (re sistance variables, loads, etc. ) is simplified and the failure criteria are idealized in such a way that the reliability calculations can be performed without an unreasonable amount of work. In spite of the approximations and idealizations made it is believed that a rational treatment of uncertainties in structural engineering can be obtained by level 2 methods. Usually, in sufficient data are at hand to make a more advanced estimate of the reliability of a struc tural member. It has been recognized for many years that a fully satisfactory estimate of the reliability of a structure must be based on a systems approach. In some situations it is sufficient to estimate the reliability of the individual structural members of a structural system.
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. This is the most advanced reference guide to the state of the art in gear engineering. Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined. The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
Download or read book Structural Performance written by Christian Cremona and published by John Wiley & Sons. This book was released on 2012-12-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the development of efficient methods for the assessment and the management of civil structures is today a major challenge from economical, social and environmental aspects. Tools for handling uncertainties in loads, geometry, material properties, construction and operating conditions are nowadays essential. Covers the key concepts across topics including probability theory and statistics, structural safety, performance-based assessment, modelling uncertainties and principles of decision theory.
