Download or read book Reliability of Maintained Systems Subjected to Wear Failure Mechanisms written by Franck Bayle and published by John Wiley & Sons. This book was released on 2019-04-10 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the reliability of systems has become a major issue in most industrial applications. The theoretical approach to estimating reliability was largely developed in the 1960s for maintenance-free systems, and more recently, in the late 1990s, it was developed for maintenance-based systems. Customers’ expectations concerning reliability (as well as maintenance, safety, etc.) are growing ever more demanding over the generations of systems. However, the theoretical methods used to handle the systems are not suitable when aging mechanisms are present. This book proposes a theoretical approach to estimate all of these quantities correctly. In addition to the theoretical aspect, it details a number of issues that any industrial system will meet sooner or later, whether due to design flaws, the batch of components, manufacturing problems or new technologies that result in the aging of mechanisms during their operational use.
Download or read book Heat Transfer 4 written by Michel Ledoux and published by John Wiley & Sons. This book was released on 2023-01-12 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat is a branch of thermodynamics that occupies a unique position due to its involvement in the field of practice. Being linked to the management, transport and exchange of energy in thermal form, it impacts all aspects of human life and activity. Heat transfers are, by nature, classified as conduction, convection (which inserts conduction into fluid mechanics) and radiation. The importance of these three transfer methods has resulted – justifiably – in a separate volume being afforded to each of them, with the subject of convection split into two volumes. This fourth volume is dedicated to convection, more specifically, the problem of particular convective transfers. Twophase convection is considered and a more recent and much lesser-known field is presented, that of phase change transfer. Particular significance is given to numerical applications, allowing the reader to handle orders of magnitude, an important point in all physics. Heat Transfer 4 combines a basic approach with a deeper understanding of the discipline and will therefore appeal to a wide audience, from technician to engineer, from doctoral student to teacher-researcher.
Download or read book Rheology Physical and Mechanical Behavior of Materials 2 written by Maurice Leroy and published by John Wiley & Sons. This book was released on 2024-04-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies the flow of materials and the influence of strain rates on the relationship between imposed stresses and the dynamic deformations obtained. It provides applications for shaping, molecular molding, shrink-fit assembly and welding, including details of the various specific processes for implementation at high strain rates, illustrated by numerous industrial examples. Rheology, Physical and Mechanical Behavior of Materials 2 presents studies on the dynamic behavior of materials when subjected to mechanical, electromagnetic and electrohydraulic actions. The topics covered include dynamic structural memory, molecular molding, shaping, assembly and welding. It is aimed at researchers involved in the mechanics of deformable media, as well as industrial design and manufacturing departments.
Download or read book Uncertainty and Artificial Intelligence written by Abdelkhalak El Hami and published by John Wiley & Sons. This book was released on 2024-01-11 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's information technology, along with Artificial Intelligence (AI), is moving towards total communication between all computerized systems. AI is a representation of human intelligence based on the creation and application of algorithms in specific computer environments. Its aim is to enable computers to act like human beings. For it to work, this type of technology requires computer systems, data with management systems and advanced algorithms, used by AI. In mechanical engineering, AI can offer many possibilities: in mechanical construction, predictive maintenance, plant monitoring, robotics, additive manufacturing, materials, vibration control and agro composites, among many others. This book is dedicated to Artificial Intelligence uncertainties in mechanical problems. Each chapter clearly sets out used and developed illustrative examples. Aimed at students, Uncertainty and Artificial Intelligence is also a valuable resource for practicing engineers and research lecturers.
Download or read book Contact in Structural Mechanics written by Anh Le van and published by John Wiley & Sons. This book was released on 2024-06-04 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contact in Structural Mechanics treats the problem of contact in the context of large deformations and the Coulomb friction law. The proposed formulation is based on a weak form that generalizes the classical principle of virtual powers in the sense that the weak form also encompasses all the contact laws. This formulation is thus a weighted residue method and has the advantage of being amenable to a standard finite element discretization. This book provides the reader with a detailed description of contact kinematics and the variation calculus of kinematic quantities, two essential subjects for any contact study. The numerical resolution is carried out in statics and dynamics. In both cases, the derivation of the contact tangent matrix – an essential ingredient for iterative calculation – is explained in detail. Several numerical examples are presented to illustrate the efficiency of the method.
Download or read book Heat Transfer 3 written by Michel Ledoux and published by John Wiley & Sons. This book was released on 2022-10-11 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat is a branch of thermodynamics that occupies a unique position due to its involvement in the field of practice. Being linked to the management, transport and exchange of energy in thermal form, it impacts all aspects of human life and activity. Heat transfers are, by nature, classified as conduction, convection (which inserts conduction into fluid mechanics) and radiation. The importance of these three transfer methods has resulted – justifiably – in a separate volume being afforded to each of them, with the subject of convection split into two volumes. This third volume is dedicated to convection, more specifically, the foundations of convective transfers. Various angles are considered to cover this topic, including empirical relationships and analytically approaching boundary layers, including the integral methods and numerical approaches. The problem of heat exchangers is presented, without aiming to be an exhaustive treatise. Heat Transfer 3 combines a basic approach with a deeper understanding of the discipline and will therefore appeal to a wide audience, from technician to engineer, from doctoral student to teacher-researcher.
Download or read book Applications and Metrology at Nanometer Scale 2 written by Pierre-Richard Dahoo and published by John Wiley & Sons. This book was released on 2021-04-14 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience, nanotechnologies and the laws of quantum physics are sources of disruptive innovation that open up new fields of application. Quantum engineering enables the development of very sensitive materials, sensor measurement systems and computers. Quantum computing, which is based on two-level systems, makes it possible to manufacture computers with high computational power. This book provides essential knowledge and culminates with an industrial application of quantum engineering and nanotechnologies. It presents optical systems for measuring at the nanoscale, as well as quantum physics models that describe how a two-state system interacts with its environment. The concept of spin and its derivation from the Dirac equation is also explored, while theoretical foundations and example applications aid in understanding how a quantum gate works. Application of the reliability-based design optimization (RBDO) method of mechanical structures is implemented, in order to ensure reliability of estimates from the measurement of mechanical properties of carbon nanotube structures. This book provides valuable support for teachers and researchers but is also intended for engineering students, working engineers and Masters students.
Download or read book Optimizations and Programming written by Abdelkhalak El Hami and published by John Wiley & Sons. This book was released on 2021-04-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a general presentation of complex systems, examined from the point of view of management. There is no standard formula to govern such systems, nor to effectively understand and respond to them. The interdisciplinary theory of self-organization is teeming with examples of living systems that can reorganize at a higher level of complexity when confronted with an external challenge of a certain magnitude. Modern businesses, considered as complex systems, ideally know how to flexibly and resiliently adapt to their environment, and also how to prepare for change via self-organization. Understanding sources of potential crisis is essential for leaders, though not all crises are necessarily bad news, as creative firms know how to respond to challenges through innovation: new products and markets, organizational learning for collective intelligence, and more.
Download or read book Product Maturity Volume 2 written by Franck Bayle and published by John Wiley & Sons. This book was released on 2022-07-13 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every parent is concerned when a child is slow to become a mature adult. This is also true for any product designer, regardless of their industry sector. For a product to be mature, it must have an expected level of reliability from the moment it is put into service, and must maintain this level throughout its industrial use. While there have been theoretical and practical advances in reliability from the 1960s to the end of the 1990s, to take into account the effect of maintenance, the maturity of a product is often only partially addressed. Product Maturity 2 fills this gap as much as possible; a difficult exercise given that maturity is a transverse activity in the engineering sciences; it must be present throughout the lifecycle of a product.
Download or read book Modern Trends in Structural and Solid Mechanics 2 written by Noel Challamel and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book – comprised of three separate volumes – presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This second volume is devoted to the vibrations of solid and structural members. Modern Trends in Structural and Solid Mechanics 2 has broad scope, covering topics such as: exact and approximate vibration solutions of rods, beams, membranes, plates and three-dimensional elasticity problems, Bolotins dynamic edge effect, the principles of plate theories in dynamics, nano- and microbeams, nonlinear dynamics of shear extensible beams, the vibration and aeroelastic stability behavior of cellular beams, the dynamic response of elastoplastic softening oscillators, the complex dynamics of hysteretic oscillators, bridging waves, and the three-dimensional propagation of waves. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.
Download or read book Heat Transfer 2 written by Michel Ledoux and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat is a branch of thermodynamics that occupies a unique position due to its involvement in the field of practice. Being linked to the management, transport and exchange of energy in thermal form, it impacts all aspects of human life and activity. Heat transfers are, by nature, classified as conduction, convection (which inserts conduction into fluid mechanics) and radiation. The importance of these three transfer methods has resulted – justifiably – in a separate volume being afforded to each of them. This second volume is dedicated to radiation. After recalling photometry, the calculation of luminance is addressed using the theory of the black body and associated laws: Stefan, Wien. The reciprocal radiation of two surfaces in total influence is discussed extensively, and the case of finished surfaces is also considered. Heat Transfer 2 combines a basic approach with a deeper understanding of the discipline and will therefore appeal to a wide audience, from technician to engineer, from doctoral student to teacher-researcher.
Download or read book Product Maturity 1 written by Franck Bayle and published by John Wiley & Sons. This book was released on 2022-03-08 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every parent is concerned when a child is slow to become a mature adult. This is also true for any product designer, regardless of their industry sector. For a product to be mature, it must have an expected level of reliability from the moment it is put into service, and must maintain this level throughout its industrial use. While there have been theoretical and practical advances in reliability from the 1960s to the end of the 1990s, to take into account the effect of maintenance, the maturity of a product is often only partially addressed. Product Maturity 1 fills this gap as much as possible; a difficult exercise given that maturity is a transverse activity in the engineering sciences; it must be present throughout the lifecycle of a product.
Download or read book Heat Transfer 1 written by Michel Ledoux and published by John Wiley & Sons. This book was released on 2021-03-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat is a branch of thermodynamics that occupies a unique position due to its involvement in the field of practice. Being linked to the management, transport and exchange of energy in thermal form, it impacts all aspects of human life and activity. Heat transfers are, by nature, classified as conduction, convection (which inserts conduction into fluid mechanics) and radiation. The importance of these three transfer methods has resulted – justifiably – in a separate volume being afforded to each of them. This first volume is dedicated to thermal conduction, and, importantly, assumes an analytical approach to the problems presented, and recalls the fundamentals. Heat Transfer 1 combines a basic approach with a deeper understanding of the discipline and will therefore appeal to a wide audience, from technician to engineer, from doctoral student to teacher-researcher.
Download or read book Modern Trends in Structural and Solid Mechanics 3 written by Noel Challamel and published by John Wiley & Sons. This book was released on 2021-06-29 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book – comprised of three separate volumes – presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This third volume is devoted to non-deterministic mechanics. Modern Trends in Structural and Solid Mechanics 3 has broad scope, covering topics such: design optimization under uncertainty, interval field approaches, convex analysis, quantum inspired topology optimization and stochastic dynamics. The book is illustrated by many applications in the field of aerospace engineering, mechanical engineering, civil engineering, biomedical engineering and automotive engineering. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.
Download or read book Rheology Physical and Mechanical Behavior of Materials 1 written by Maurice Leroy and published by John Wiley & Sons. This book was released on 2023-11-28 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies the flow of materials and the influence of strain rates on the relationship between imposed stresses and the dynamic deformations obtained. It provides applications for shaping, molecular molding, shrink-fit assembly and welding, including details of the various specific processes for implementation at high strain rates, illustrated by numerous industrial examples. Rheology, Physical and Mechanical Behavior of Materials 1 presents analyses of plasticity mechanisms at microscopic and macroscopic scales, and of the various forms of stressstrain behavior laws according to working speeds, mechanisms, athermics, viscoplasticity and formability limits at types and speeds of change. It is aimed at researchers involved in the mechanics of deformable media, as well as industrial design and manufacturing departments
Download or read book Movement Equations 5 written by Georges Vénizélos and published by John Wiley & Sons. This book was released on 2019-12-03 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The final volume in the Non-deformable Solid Mechanics set, Movement Equations 5 deals with the dynamics of sets of solids. This volume provides the appropriate mathematical tools (torsor calculus and matrix calculus) to obtain and solve the equations of motion for a chain of solids. These equations are then used to acquire the information necessary for the design of mechanical systems. Also examined are the vibratory behavior of continuous (deformable) systems, rigid and deformable solids, and sets of several solids. The book concludes with a study of the response of an excited system as a function of the excitation frequency. Accompanied by detailed examples, this book is aimed primarily at students, but would also serve as a valuable support for working engineers and teacher-researchers.
Download or read book From AI to Autonomous and Connected Vehicles written by Abdelaziz Bensrhair and published by John Wiley & Sons. This book was released on 2021-08-25 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of this book is the recent development of on-board advanced driver-assistance systems (ADAS), which we can already tell will eventually contribute to the autonomous and connected vehicles of tomorrow. With the development of automated mobility, it becomes necessary to design a series of modules which, from the data produced by on-board or remote information sources, will enable the construction of a completely automated driving system. These modules are perception, decision and action. State-of-the-art AI techniques and their potential applications in the field of autonomous vehicles are described. Perception systems, focusing on visual sensors, the decision module and the prototyping, testing and evaluation of ADAS systems are all presented for effective implementation on autonomous and connected vehicles. This book also addresses cooperative systems, such as pedestrian detection, as well as the legal issues in the use of autonomous vehicles in open environments.
