Download or read book Reliability Modeling Analysis And Optimization written by Hoang Pham and published by World Scientific. This book was released on 2006-06-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: As our modern information-age society grows in complexity both in terms of embedded systems and applications, the problems and challenges in reliability become ever more complex. Bringing together many of the leading experts in the field, this volume presents a broad picture of current research on system modeling and optimization in reliability and its applications.The book comprises twenty-three chapters organized into four parts: Reliability Modeling, Software Quality Engineering, Software Reliability, and Maintenance and Inspection Policies. These sections cover a wide range of important topics, including system reliability modeling, optimization, software reliability and quality, maintenance theory and inspection, reliability failure analysis, sampling plans and schemes, software development processes and improvement, stochastic process modeling, statistical distributions and analysis, fault-tolerant performance, software measurements and cost effectiveness, queueing theory and applications, system availability, reliability of repairable systems, testing sampling inspection, software capability maturity model, accelerated life modeling, statistical control, and HALT testing.
Download or read book Reliability Modeling Analysis and Optimization written by Hoang Pham and published by . This book was released on 2005* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability written by Wallace R. Blischke and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together business and engineering to reliability analysisWith manufactured products exploding in numbers and complexity,reliability studies play an increasingly critical role throughout aproduct's entire life cycle-from design to post-sale support.Reliability: Modeling, Prediction, and Optimization presents aremarkably broad framework for the analysis of the technical andcommercial aspects of product reliability, integrating concepts andmethodologies from such diverse areas as engineering, materialsscience, statistics, probability, operations research, andmanagement. Written in plain language by two highly respectedexperts in the field, this practical work provides engineers,operations managers, and applied statisticians with bothqualitative and quantitative tools for solving a variety ofcomplex, real-world reliability problems. A wealth of examples andcase studies accompanies: * Comprehensive coverage of assessment, prediction, and improvementat each stage of a product's life cycle * Clear explanations of modeling and analysis for hardware rangingfrom a single part to whole systems * Thorough coverage of test design and statistical analysis ofreliability data * A special chapter on software reliability * Coverage of effective management of reliability, product support,testing, pricing, and related topics * Lists of sources for technical information, data, and computerprograms * Hundreds of graphs, charts, and tables, as well as over 500references * PowerPoint slides are available from the Wiley editorialdepartment.
Download or read book Optimization Models in Software Reliability written by Anu G. Aggarwal and published by Springer Nature. This book was released on 2021-09-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to software reliability, models and techniques. The book is an informative book covering the strategies needed to assess software failure behaviour and its quality, as well as the application of optimization tools for major managerial decisions related to the software development process. It features a broad range of topics including software reliability assessment and apportionment, optimal allocation and selection decisions and upgradations problems. It moves through a variety of problems related to the evolving field of optimization of software reliability engineering, including software release time, resource allocating, budget planning and warranty models, which are each explored in depth in dedicated chapters. This book provides a comprehensive insight into present-day practices in software reliability engineering, making it relevant to students, researchers, academics and practising consultants and engineers.
Download or read book The Universal Generating Function in Reliability Analysis and Optimization written by Gregory Levitin and published by Springer Science & Business Media. This book was released on 2006-02-04 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many real systems are composed of multi-state components with different performance levels and several failure modes. These affect the whole system's performance. Most books on reliability theory cover binary models that allow a system only to function perfectly or fail completely. "The Universal Generating Function in Reliability Analysis and Optimization" is the first book that gives a comprehensive description of the universal generating function technique and its applications in binary and multi-state system reliability analysis. Features: - an introduction to basic tools of multi-state system reliability and optimization; - applications of the universal generating function in widely used multi-state systems; - examples of the adaptation of the universal generating function to different systems in mechanical, industrial and software engineering. This monograph will be of value to anyone interested in system reliability, performance analysis and optimization in industrial, electrical and nuclear engineering.
Download or read book Stochastic Reliability Modeling Optimization and Applications written by Syouji Nakamura and published by World Scientific. This book was released on 2010 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reliability theory and applications become major concerns of engineers and managers engaged in making high quality products and designing highly reliable systems. This book aims to survey new research topics in reliability theory and useful applied techniques in reliability engineering." "The reader will learn new topics and techniques, and how to apply reliability models to actual ones. The book will serve as an essential guide to a subject of study for graduate students and researchers and as a useful guide for reliability engineers engaged not only in maintenance work but also in management and computer works." --Book Jacket.
Download or read book Optimal Reliability Modeling written by Way Kuo and published by John Wiley & Sons. This book was released on 2003-02-17 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Promotes better ways to diagnose, maintain, and improve existing systems. Existing reliability evaluation models are examined with respect to today's complicated engineering systems that have hundreds of thousands of integrated component designs.
Download or read book Gas and Oil Reliability Engineering written by Eduardo Calixto and published by Gulf Professional Publishing. This book was released on 2016-05-07 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas and Oil Reliability Engineering: Modeling and Analysis, Second Edition, provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs to stay competitive, especially while oil prices are low. Updated with relevant analysis and case studies covering equipment for both onshore and offshore operations, this reference provides the engineer and manager with more information on lifetime data analysis (LDA), safety integrity levels (SILs), and asset management. New chapters on safety, more coverage on the latest software, and techniques such as ReBi (Reliability-Based Inspection), ReGBI (Reliability Growth-Based Inspection), RCM (Reliability Centered Maintenance), and LDA (Lifetime Data Analysis), and asset integrity management, make the book a critical resource that will arm engineers and managers with the basic reliability principles and standard concepts that are necessary to explain their use for reliability assurance for the oil and gas industry. - Provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs - Presents practical knowledge with over 20 new internationally-based case studies covering BOPs, offshore platforms, pipelines, valves, and subsea equipment from various locations, such as Australia, the Middle East, and Asia - Contains expanded explanations of reliability skills with a new chapter on asset integrity management, relevant software, and techniques training, such as THERP, ASEP, RBI, FMEA, and RAMS
Download or read book Structural Reliability Analysis and Prediction written by Robert E. Melchers and published by John Wiley & Sons. This book was released on 2017-10-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Reliability Analysis and Prediction, Third Edition is a textbook which addresses the important issue of predicting the safety of structures at the design stage and also the safety of existing, perhaps deteriorating structures. Attention is focused on the development and definition of limit states such as serviceability and ultimate strength, the definition of failure and the various models which might be used to describe strength and loading. This book emphasises concepts and applications, built up from basic principles and avoids undue mathematical rigour. It presents an accessible and unified account of the theory and techniques for the analysis of the reliability of engineering structures using probability theory. This new edition has been updated to cover new developments and applications and a new chapter is included which covers structural optimization in the context of reliability analysis. New examples and end of chapter problems are also now included.
Download or read book Reliability Modelling and Optimization of Warm Standby Systems written by Rui Peng and published by Springer Nature. This book was released on 2021-05-02 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reliability modelling and optimization of warm standby systems. Warm standby is an attractive redundancy technique, as it consumes less energy than hot standby and switches into the active state faster than cold standby. Since a warm standby component experiences different failure rates in the standby state and active state, the reliability evaluation is challenging and the existing works are only restricted to very special cases. By adapting the decision diagrams, this book proposes the methodology to evaluate the reliability of different types of warm standby systems and studies the reliability optimization. Compared with existing works, the proposed methods allow the system to have an arbitrary number of components and allow the failure time distribution of components to observe arbitrary distributions. From this book, the readers can not only learn how to evaluate and optimize the reliability of warm standby systems but also use the methods to study the reliability of other complex systems.
Download or read book Long Term Reliability of Nanometer VLSI Systems written by Sheldon Tan and published by Springer Nature. This book was released on 2019-09-12 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a detailed reference regarding two of the most important long-term reliability and aging effects on nanometer integrated systems, electromigrations (EM) for interconnect and biased temperature instability (BTI) for CMOS devices. The authors discuss in detail recent developments in the modeling, analysis and optimization of the reliability effects from EM and BTI induced failures at the circuit, architecture and system levels of abstraction. Readers will benefit from a focus on topics such as recently developed, physics-based EM modeling, EM modeling for multi-segment wires, new EM-aware power grid analysis, and system level EM-induced reliability optimization and management techniques. Reviews classic Electromigration (EM) models, as well as existing EM failure models and discusses the limitations of those models; Introduces a dynamic EM model to address transient stress evolution, in which wires are stressed under time-varying current flows, and the EM recovery effects. Also includes new, parameterized equivalent DC current based EM models to address the recovery and transient effects; Presents a cross-layer approach to transistor aging modeling, analysis and mitigation, spanning multiple abstraction levels; Equips readers for EM-induced dynamic reliability management and energy or lifetime optimization techniques, for many-core dark silicon microprocessors, embedded systems, lower power many-core processors and datacenters.
Download or read book Stochastic Reliability Modeling Optimization and Applications written by Syouji Nakamura and published by World Scientific. This book was released on 2010 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aims to survey research topics in reliability theory and useful applied techniques in reliability engineering. This book focuses on how to apply the results of reliability theory to practical models. Theoretical results of coherent, inspection, and damage systems are summarized methodically, using the techniques of stochastic processes.
Download or read book Reliability and Optimization of Structural Systems written by Daniel Straub and published by CRC Press. This book was released on 2010-07-28 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 28 papers by renowned international experts on the latest advances in structural reliability methods and applications, engineering risk analysis and decision making, new optimization techniques and various applications in civil engineering. Moreover, several contributions focus on the assessment and optimization of existing str
Download or read book Reliability Modeling in Industry 4 0 written by Mangey Ram and published by Elsevier. This book was released on 2023-03-13 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Modeling with Industry 4.0 explores the emerging theoretical and practical developments in reliability engineering in highly digitized industries, including power, computer systems, railway systems, and robotics. Drawing on leading research from around the globe, as well as the latest in industry practice, this book provides cutting edge advice on how to integrate a fully digitized industry 4.0 system for enhanced reliability and reduced maintenance cost. Technologies such as big data, artificial intelligence, and the industrial internet of things are addressed in the context of reliability engineering, providing practical advice on applications. - Provides innovative reliability modeling tools related to the application of Industry 4.0 technologies - Includes case studies from industries such as rail, energy, and computer systems - Describes techniques for the successful digital transformation of industries for sophisticated reliability systems
Download or read book Modeling Analysis and Optimization of Process and Energy Systems written by F. Carl Knopf and published by John Wiley & Sons. This book was released on 2011-12-14 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy costs impact the profitability of virtually all industrial processes. Stressing how plants use power, and how that power is actually generated, this book provides a clear and simple way to understand the energy usage in various processes, as well as methods for optimizing these processes using practical hands-on simulations and a unique approach that details solved problems utilizing actual plant data. Invaluable information offers a complete energy-saving approach essential for both the chemical and mechanical engineering curricula, as well as for practicing engineers.
Download or read book Recent Advances in Reliability and Quality Engineering written by Hoang Pham and published by World Scientific. This book was released on 2001 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents recent research in reliability and quality theory and its applications by many leading experts in the field. The subjects covered include reliability optimization, software reliability, maintenance, quality engineering, system reliability, Monte Carlo simulation, tolerance design optimization, manufacturing system estimation, neural networks, software quality assessment, optimization design of life tests, software quality, reliability-centered maintenance, multivariate control chart, methodology for measurement of test effectiveness, imperfect preventive maintenance, Markovian reliability modeling, accelerated life testing, and system availability assessment. The book will serve as a reference for postgraduate students and will also prove useful for practitioners and researchers in reliability and quality engineering. Sample Chapter(s). Chapter 1.1: Introduction (88 KB). Chapter 1.2: The Symmetrical Johnson Su Distributions (101 KB). Chapter 1.3: Application to Control Charts (79 KB). Chapter 1.4: An Example (84 KB). Chapter 1.5: How Kurtosis Affects Classical Charts (104 KB). Chapter 1.6: OC and ARL Curves (133 KB). Chapter 1.7: Conlusions (129 KB). Contents: Control Charts for Data Having a Symmetrical Distribution with a Positive Kurtosis (P Philippe); A Software Reliability Model with Testing Coverage and Imperfect Debugging (X Zhang & H Pham); Cost Allocation for Software Reliability (O Berman & M Cutler); General Reliability Test Plans for One-Shot Devices (W Zhang & W-K Shiue); Multivariate Control Chart (M-W Lu & R J Rudy); Optimal Preparedness Maintenance of Multi-Unit Systems with Imperfect Maintenance and Economic Dependence (H Wang et al.); Estimation of System Reliability by Variationally Processed Monte Carlo Simulation (M Chang et al.); A Bayesian Approach to the Optimal Policy under Imperfect Preventive Maintenance Models (K-S Park & C-H Jun); Design of Life Tests Based on Multi-Stage Decision Process (A Kanagawa & H Ohta); Reliability-Centered Maintenance for Light Rail Equipment (K H K Leung et al.); Incorporating Environmental Concepts with Tolerance Design Optimization Model (G Chen); Markovian Reliability Modeling for Software Safety/Availability Measurement (K Tokuno & S Yamada); Group Control Charts with Variable Stream and Sample Sizes (K T Lee et al.); A Methodology for the Measurement of Test Effectiveness (J C Munson & A P Nikora); Modeling Software Quality with Classification Trees (T M Khoshgoftaar & E B Allen); Highly Reliable Systems: Designing Software for Improved Assessment (B Cukic & F Bastani); Manufacturing Systems Estimation Using Neural Network Models (P L Cooper & G J Savage); A Deterministic Selective Maintenance Model for Complex Systems (C R Cassady et al.). Readership: Practitioners, postgraduate students and researchers in reliability and quality engineering.
Download or read book Reliability and Safety of Complex Technical Systems and Processes written by Krzysztof Kołowrocki and published by Springer Science & Business Media. This book was released on 2011-07-29 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Safety of Complex Technical Systems and Processes offers a comprehensive approach to the analysis, identification, evaluation, prediction and optimization of complex technical systems operation, reliability and safety. Its main emphasis is on multistate systems with ageing components, changes to their structure, and their components reliability and safety parameters during the operation processes. Reliability and Safety of Complex Technical Systems and Processes presents integrated models for the reliability, availability and safety of complex non-repairable and repairable multistate technical systems, with reference to their operation processes and their practical applications to real industrial systems. The authors consider variables in different operation states, reliability and safety structures, and the reliability and safety parameters of components, as well as suggesting a cost analysis for complex technical systems. Researchers and industry practitioners will find information on a wide range of complex technical systems in Reliability and Safety of Complex Technical Systems and Processes. It may prove an easy-to-use guide to reliability and safety evaluations of real complex technical systems, both during their operation and at the design stages.
