Download or read book Reliability Engineering Technology of Digital Diagnosis and Treatment Equipment written by Xiuqing Li and published by Springer. This book was released on 2024-01-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the reliability engineering of medical devices, especially digital diagnosis and treatment equipment in China. It details the professional technologies and application methods of reliability design analysis, fault model analysis and reliability test of digital diagnosis and treatment equipment, to meet the needs of project undertakers of digital diagnosis and treatment equipment. From the three aspects: safety analysis and EMC design protection, material selection and control, and software engineering and quality, this book provides professional and technical ideas and methods of reliability for the quality problems prone to occur in the field of medical devices, as well as method guidance for readers. Meanwhile, it runs through the whole process of design, engineering, testing, production and management of all digital diagnosis and treatment equipment research and development enterprises and even product R & D enterprises in the field of medical devices. It is used as reading materials for personnel of testing institutions and evaluation institutions in medical devices.
Download or read book Reliability Engineering Technology of Digital Diagnosis and Treatment Equipment written by Xiuqing Li and published by Springer Nature. This book was released on with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inspection of Medical Devices written by Almir Badnjević and published by Springer. This book was released on 2017-10-26 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers all countries a guide to implementing verification systems for medical devices to ensure they satisfy their regulations. It describes the processes, procedures and need for integrating medical devices into the legal metrology framework, addresses their independent safety and performance verification, and highlights the associated savings for national healthcare systems, all with the ultimate goal of increasing the efficacy and reliability of patient diagnoses and treatment. The book primarily focuses on diagnostic and therapeutic medical devices, and reflects the latest international directives and regulations. Above all, the book demonstrates that integrating medical devices into the legal metrology system and establishing a fully operational national laboratory for the inspection of medical devices could significantly improve the reliability of medical devices in diagnosis and patient care, while also reducing costs for the healthcare system in the respective country.
Download or read book Recent Advances in Digital System Diagnosis and Management of Healthcare written by Kamran Sartipi and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologically supported healthcare management is beginning to take center stage as advances occur in many aspects of healthcare, involving big data, artificial intelligence, and improved user interfaces. This volume provides a perspective on a number of such advances, ranging from homecare with remote network support and primary homecare to telemedicine application for pediatric cardiology. A special section with chapters on Clinical Decision Support Systems (CDSS) addresses topics in improved human interfaces, intelligent support for better quality home and institutional care, effective big data visualization for decision-makers, and gathering data from multiple sources to support the battle against resistant bacteria.
Download or read book Reliability and Risk Issues in Large Scale Safety critical Digital Control Systems written by Poong-Hyun Seong and published by Springer Science & Business Media. This book was released on 2008-10-25 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Reliability and Risk Issues in Large Scale Safety-critical Digital Control Systems” provides a comprehensive coverage of reliability issues and their corresponding countermeasures in the field of large-scale digital control systems, from the hardware and software in digital systems to the human operators who supervise the overall process of large-scale systems. Unlike other books which examine theories and issues in individual fields, this book reviews important problems and countermeasures across the fields of software reliability, software verification and validation, digital systems, human factors engineering and human reliability analysis. Divided into four sections dealing with software reliability, digital system reliability, human reliability and human operators in large-scale digital systems, the book offers insights from professional researchers in each specialized field in a diverse yet unified approach.
Download or read book Reliability and Risk Issues in Large Scale Safety critical Digital Control Systems written by Poong-Hyun Seong and published by Springer Science & Business Media. This book was released on 2008-11-25 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Reliability and Risk Issues in Large Scale Safety-critical Digital Control Systems” provides a comprehensive coverage of reliability issues and their corresponding countermeasures in the field of large-scale digital control systems, from the hardware and software in digital systems to the human operators who supervise the overall process of large-scale systems. Unlike other books which examine theories and issues in individual fields, this book reviews important problems and countermeasures across the fields of software reliability, software verification and validation, digital systems, human factors engineering and human reliability analysis. Divided into four sections dealing with software reliability, digital system reliability, human reliability and human operators in large-scale digital systems, the book offers insights from professional researchers in each specialized field in a diverse yet unified approach.
Download or read book Reliability Technology written by Norman Pascoe and published by John Wiley & Sons. This book was released on 2011-04-25 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that describes the practical processes necessary to achieve failure free equipment performance, for quality and reliability engineers, design, manufacturing process and environmental test engineers. This book studies the essential requirements for successful product life cycle management. It identifies key contributors to failure in product life cycle management and particular emphasis is placed upon the importance of thorough Manufacturing Process Capability reviews for both in-house and outsourced manufacturing strategies. The readers? attention is also drawn to the many hazards to which a new product is exposed from the commencement of manufacture through to end of life disposal. Revolutionary in focus, as it describes how to achieve failure free performance rather than how to predict an acceptable performance failure rate (reliability technology rather than reliability engineering) Author has over 40 years experience in the field, and the text is based on classroom tested notes from the reliability technology course he taught at Massachusetts Institute of Technology (MIT), USA Contains graphical interpretations of mathematical models together with diagrams, tables of physical constants, case studies and unique worked examples
Download or read book IoT and Spacecraft Informatics written by K.L. Yung and published by Elsevier. This book was released on 2022-03-29 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: IoT and Spacecraft Informatics provides the theory and applications of IoT systems in the design, development and operation of spacecraft. Sections present a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions, key technologies, protocols, and technical building blocks that combine into complete IoT solutions. The book features the latest advances, findings and state-of-the-art in research, case studies, development and implementation of IoT technologies for spacecraft and space systems. In addition, it concentrates on different aspects and techniques to achieve automatic control of spacecraft. This book is for researchers, PhD students, engineers and specialists in aerospace engineering as well as those in computer science, computer engineering or mechatronics. Presents state-of-the-art research on IoT and spacecraft technology Provides artificial intelligence-based solutions and robotics for space exploration applications Introduces new applications and case studies of IoT and spacecraft informatics
Download or read book Reliability Abstracts and Technical Reviews written by United States. National Aeronautics and Space Administration. Office of Reliability and Quality Assurance and published by . This book was released on 1969 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equitable Digital Medicine and Home Health Care written by Tambone Vittoradolfo and published by Frontiers Media SA. This book was released on with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies shape the way in which individuals and health systems interact to promote health and treat illness. Their propensity to exacerbate inequalities is increasingly being highlighted as a concern for public health. Personal, contextual and technological factors all interact and determine uptake and consequent use of digital technologies for health. Digitalization and the introduction of telemedicine services have demonstrably improved equity in delivering health care services. Digital tech is making healthcare proactive as opposed to reactive, enlarging and enabling access to quality healthcare for communities that were traditionally underserved or marginalized and for home health care. In this scenario, there are still relevant ethical issues that need to be addressed in order to ensure an effective and efficient care in digital medicine. The Topic Editors are inviting papers on a range of research, practices, and educational topics regarding ethical issues particularly related to the experience of patients, front line healthcare professionals, and healthcare managers.
Download or read book Electronics Communications and Networks IV written by Amir Hussain and published by CRC Press. This book was released on 2015-07-01 with total page 1868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Conference on Electronic, Communications and Networks (CECNet2014) inherits the fruitfulness of the past three conferences and lays a foundation for the forthcoming next year in Shanghai. CECNet2014 was hosted by Hubei University of Science and Technology, China, with the main objective of providing a comprehensive global foru
Download or read book International Journal of Prognostics and Health Management Volume 1 color written by PHM Society and published by Lulu.com. This book was released on 2013-09-24 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request. The first IJPHM volume came out in 2010 with three research papers that discussed the key issue of PHM performance that is still relevant to the maturing field of PHM.
Download or read book Modern Digital Control Systems written by Raymond G. Jacquot and published by Routledge. This book was released on 2019-01-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents traditional methods and current techniques of incorporating the computer into closed-loop dynamic systems control, combining conventional transfer function design and state variable concepts. Digital Control Designer - an award-winning software program which permits the solution of highly complex problems - is available on the CR
Download or read book Reliability Analysis and Asset Management of Engineering Systems written by Gilberto Francisco Martha de Souza and published by Elsevier. This book was released on 2021-09-24 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Analysis and Asset Management of Engineering Systems explains methods that can be used to evaluate reliability and availability of complex systems, including simulation-based methods. The increasing digitization of mechanical processes driven by Industry 4.0 increases the interaction between machines and monitoring and control systems, leading to increases in system complexity. For those systems the reliability and availability analyses are increasingly challenging, as the interaction between machines has become more complex, and the analysis of the flexibility of the production systems to respond to machinery failure may require advanced simulation techniques. This book fills a gap on how to deal with such complex systems by linking the concepts of systems reliability and asset management, and then making these solutions more accessible to industry by explaining the availability analysis of complex systems based on simulation methods that emphasise Petri nets. Explains how to use a monitoring database to perform important tasks including an update of complex systems reliability Shows how to diagnose probable machinery-based causes of system performance degradation by using a monitoring database and reliability estimates in an integrated way Describes practical techniques for the application of AI and machine learning methods to fault detection and diagnosis problems
Download or read book Digital Enterprise Technology written by Pedro Filipe Cunha and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Digital Enterprise Technology (DET) International Conference was held in Durham, UK in 2002 and the second DET Conference in Seattle, USA in 2004. Sponsored by CIRP (College International pour la Recherche en Productique), the third DET Conference took place in Setúbal, Portugal in 2006. Digital Enterprise Technology: Perspectives and Future Challenges is an edited volume based on this conference. Topics include: distributed and collaborative design, process modeling and process planning, advanced factory equipment and layout design and modeling, physical-to-digital environment integrators, enterprise integration technologies, and entrepreneurship in DET.
Download or read book Information Technology in Medical Diagnostics II written by Waldemar Wójcik and published by CRC Press. This book was released on 2019-02-13 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many centuries, mankind has tried to learn about his health. Initially, during the pre-technological period, he could only rely on his senses. Then there were simple tools to help the senses. The breakthrough turned out to be the discovery of X-rays, which gave insight into the human body. Contemporary medical diagnostics are increasingly supported by information technology, which for example offers a very thorough analysis of the tissue image or the pathology differentiation. It also offers possibilities for very early preventive diagnosis. Under the influence of information technology, 'traditional' diagnostic techniques and new ones are changing. More and more often the same methods can be used for both medical and technical diagnostics. In addition, methodologies are developed that are inspired by the functioning of living organisms. Information Technology in Medical Diagnostics II is the second volume in a series showing the latest advances in information technologies directly or indirectly applied to medical diagnostics. Unlike the previous book, this volume does not contain closed chapters, but rather extended versions of presentations made during two conferences: XLVIII International Scientific and Practical Conference ‘Application of Lasers in Medicine and Biology’ (Kharkov, Ukraine) and the International Scientific Internet conference ‘Computer graphics and image processing’ (Vinnitsa, Ukriane), both held in May 2018. Information Technology in Medical Diagnostics II links technological issues to medical and biological issues, and will be valuable to academics and professionals interested in medical diagnostics and IT.
Download or read book Advanced Concepts In Nuclear Energy Risk Assessment And Management written by Tunc Aldemir and published by World Scientific. This book was released on 2018-04-25 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 30 years, numerous concerns have been raised in the literature regarding the capability of static modeling approaches such as the event-tree (ET)/fault-tree (FT) methodology to adequately account for the impact of process/hardware/software/firmware/human interactions on nuclear power plant safety assessment, and methodologies to augment the ET/FT approach have been proposed. Often referred to as dynamic probabilistic risk/safety assessment (DPRA/DPSA) methodologies, which use a time-dependent phenomenological model of system evolution along with a model of its stochastic behavior to model for possible dependencies among failure events. The book contains a collection of papers that describe at existing plant level applicable DPRA/DPSA tools, as well as techniques that can be used to augment the ET/FT approach when needed.
