Download or read book Reliability based Evaluation of Clay Strength from the Cone Penetration Test written by Bjorn Birgisson and published by . This book was released on 1991 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Texas Cone Penetrometer Test to Predict Undrained Shear Strength of Clays written by Hariharan Vasudevan and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The cone penetration test used in Texas is termed as Texas cone penetrometer (TCP), which works on dynamic principles similar to those of SPT, i.e. a hammer is used to drive the cone device for a preset depth of penetration of 12 inches. Results are typically reported in the form of N12 values. Correlations between N12 and soil strength properties are currently used by the TxDOT to determine in situ strength properties of soils prior to any infrastructure design. The currently used relationship between the penetrometer test N12 value and undrained shear strength was found to be lower bound for the data obtained from Dallas and Fort Worth regions. Hence, improved correlations were established between TCP test results and undrained shear strength for cohesive soils via statistical regression methods. Comparisons of undrained shear strength predicted by these new correlations with both measured strength and predicted undrained shear strength by the current geotechnical manual showed the reliable and improved predictions by the recommended model for stiff clays. These correlations still need to be evaluated with more independent TCP data to further validate their interpretations. (Abstract shortened by UMI.).
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis, (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity was transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 19 (thesis year 1974) a total of 10,045 theses titles from 20 Canadian and 209 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 19 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.
Download or read book Interpretation of Cone Penetration Tests in Cohesive Soils written by Kwangkyum Kim and published by . This book was released on 2006-12-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Canadian Foundation Engineering Manual written by Canadian Geotechnical Society and published by Richmond, B.C. : Canadian Geotechnical Society. This book was released on 1992 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-06-23 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.
Download or read book Cone Penetration Testing written by A. C. Meigh and published by Elsevier. This book was released on 2013-10-22 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Penetration Testing: Methods and Interpretation discusses the history, applications, and development of the cone penetration test procedures and related test procedures. The book is divided into two parts. Part 1 deals with the cone penetration test proper – its general and historical outline, equipment and their accuracy and calibration, the use of the test results, and its parameters in different kinds of soils and materials. Part 2 covers the role and use of piezocones and its use for the assessment of soil. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.
Download or read book Cone Penetration Testing in Geotechnical Practice written by T. Lunne and published by CRC Press. This book was released on 2002-09-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on the specification, performance, use and interpretation of the Electric Cone Penetration Test (CPU), and in particular the Cone Penetration Test with pore pressure measurement (CPTU) commonly referred to as the "piezocone test".
Download or read book Reliability of Geotechnical Structures in ISO2394 written by K.K. Phoon and published by CRC Press. This book was released on 2016-11-25 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest 4th edition of the international standard on the principles of reliability for load bearing structures (ISO2394:2015) includes a new Annex D dedicated to the reliability of geotechnical structures. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process. This book contains a wealth of data and information to assist geotechnical engineers with the implementation of semi-probabilistic or full probabilistic design approaches within the context of established geotechnical knowledge, principles, and experience. The introduction to the book presents an overview on how reliability can play a complementary role within prevailing norms in geotechnical practice to address situations where some measured data and/or past experience exist for limited site-specifi c data to be supplemented by both objective regional data and subjective judgment derived from comparable sites elsewhere. The principles of reliability as presented in ISO2394:2015 provides the common basis for harmonization of structural and geotechnical design. The balance of the chapters describes the uncertainty representation of geotechnical design parameters, the statistical characterization of multivariate geotechnical data and model factors, semi-probabilistic and direct probability-based design methods in accordance to the outline of Annex D. This book elaborates and reinforces the goal of Annex D to advance geotechnical reliability-based design with geotechnical needs at the forefront while complying with the general principles of reliability given by ISO2394:2015. It serves as a supplementary reference to Annex D and it is a must-read for designing geotechnical structures in compliance with ISO2394:2015.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1993 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 36 reports (for thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 US universities. The organization of the volume, as in past years, consists of thesis titles arranged by discipline, and by university within each discipline. The titles are contributed by any and all a
Download or read book Cone Penetration Testing written by Paul W. Mayne and published by Transportation Research Board. This book was released on 2007 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP synthesis 368 explores the current practices of departments of transportation associated with cone penetration testing (CPT). The report examines cone penetrometer equipment options; field testing procedures; CPT data presentation and geostratigraphic profiling; CPT evaluation of soil engineering parameters and properties; CPT for deep foundations, pilings, shallow foundations, and embankments; and CPT use in ground modifications and difficult ground conditions.
Download or read book Cone Penetration Testing 2018 written by Michael A. Hicks and published by CRC Press. This book was released on 2018-06-13 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cone Penetration Testing 2018 contains the proceedings of the 4th International Symposium on Cone Penetration Testing (CPT’18, Delft, The Netherlands, 21-22 June 2018), and presents the latest developments relating to the use of cone penetration testing in geotechnical engineering. It focuses on the solution of geotechnical challenges using the cone penetration test (CPT), CPT add-on measurements and companion in-situ penetration tools (such as full flow and free fall penetrometers), with an emphasis on practical experience and application of research findings. The peer-reviewed papers have been authored by academics, researchers and practitioners from many countries worldwide and cover numerous important aspects, ranging from the development of innovative theoretical and numerical methods of interpretation, to real field applications. This is an Open Access ebook, and can be found on www.taylorfrancis.com.
Download or read book Normalization and Prediction of Geotechnical Properties Using the Cone Penetrometer Test CPT written by Richard Scott Olsen and published by . This book was released on 1994 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research was to develop techniques for (1) stress normalization of CPT measurements (and geotechnical properties) and (2) CPT prediction of geotechnical properties using cone and sleeve friction resistance values. Stress normalization allows a variable geotechnical property to be reduced to an equivalent value at a standard confining stress. A new concept, the Stress Focus, was identified which provides a basis for understanding soil strength as a function of confining stress. This study demonstrated that sand friction angles for different initial relative densities converge to a Stress Focus at high confining stress (approximately 100 atm), where the strength behavior is similar to that of a sedimentary rock. Dilation of dense sands decreases with increased confining stress until the Stress Focus is reached, as confirmed using historic high pressure triaxial test data as well with CPT measurements from laboratory chamber tests and uniform soil layers. The paths of convergence to the Stress Focus are exponentially related to confining stress and are the basis for development of CPT cone and sleeve friction resistance normalization techniques. The overburden stress at the Stress Focus is soil type dependent. The stress exponent for SPT normalization was shown to be equal to the CPT derived stress exponent. CPT correlations to geotechnical properties were established using both CPT cone resistance and friction ratio. Geotechnical properties, Stress exponent, Sand friction angles, Stress normalization, Soil strength.
Download or read book Estimating Undrained Shear Strength of Clay from Cone Penetration Tests written by James William Greig and published by . This book was released on 1985 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of GeoShanghai 2018 International Conference Multi physics Processes in Soil Mechanics and Advances in Geotechnical Testing written by Liangbo Hu and published by Springer. This book was released on 2018-05-03 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This conference showcased the recent advances and technology in geotechnical engineering, geoenvironmental engineering and transportation engineering. This volume, entitled “Multi-physics Processes in Soil Mechanics and Advances in Geotechnical Testing”, covers a wide range of topics in soil mechanics, focusing on the behaviours of partially saturated soils, combined effects of multi-physics processes in geological materials and systems, and emerging methods and techniques in geotechnical in-situ testing and monitoring. This book may benefit researchers and scientists from the academic fields of soil and rock mechanics, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from the industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.
Download or read book Landslides in Sensitive Clays written by Vikas Thakur and published by Springer. This book was released on 2017-05-23 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the most recent scientific research on the geological, geotechnical and geophysical aspects of slope failure in sensitive clays. Gathering contributions by international experts, it focuses on understanding the complete and practical spectrum of challenges presented by landslides in such complex materials. Based on sound and validated research results, the book also presents several recommendations that could be implemented in the guidelines or code-of-practice. These recommendations cover topics including the characterization and behavior of sensitive clays; the pre-failure, failure and post-failure stages of sensitive clays; mapping and identification methods; climate change; hazard assessment; and risk management. Sensitive clays are known for their potential for causing large landslides, which pose a serious risk to human lives, infrastructure, and surrounding ecosystems within their reach. This has been demonstrated by the recent catastrophic landslides in e.g. Sørum (2016), Skjeggestad (2015), Statland (2014), Byneset (2012), St-Jude (2010), Lyngen (2010) and Kattmarka (2009). The 2015 collapse of the Skjeggestad Bridge in Norway – which was due to a landslide in sensitive clay – alone costs millions of dollars in repairs. Recently, efforts are being made to increase society’s ability to cope with such landslide hazards. Geoscientists are now expected to provide input to the agencies responsible for landslide-risk preparedness. In other words, geoscientists’ role is not only to act as technologists to establish new theories, but also to go the extra mile to implement them in practice, so as to find meaningful solutions to geotechnical problems.
