Download or read book Reliability Aspects in the Design and Execution of Concrete Structures written by Juraj Bil?ík and published by Trans Tech Publications Ltd. This book was released on 2016-05-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume will be useful for wide range scientific researchers and engineers from area of construction materials and structures.

Download or read book Advances and Trends in Engineering Sciences and Technologies II written by Mohamad Al Ali and published by CRC Press. This book was released on 2016-11-30 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the 2nd International Conference on Engineering Sciences and Technologies (ESaT 2016), held from 29th of June until the 1st of July 2016 in the scenic High Tatras Mountains, Tatranské Matliare, Slovak Republic. After the successful implementation and excellent feedback of the first international conference ESaT 2015, ESaT 2016 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice, Slovak Republic in collaboration with the University of Miskolc, Hungary. The conference focused on a wide spectrum of topics and subject areas in civil engineering sciences. The proceedings bringing new and original advances and trends in various fields of engineering sciences and technologies that accost a wide range of academics, scientists, researchers and professionals from universities and practice. The authors of the articles originate from different countries around the world guaranteeing the importance, topicality, quality and level of presented results.

Download or read book Advances and Trends in Engineering Sciences and Technologies II written by Mohamad Ali and published by CRC Press. This book was released on 2016-11-30 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the 2nd International Conference on Engineering Sciences and Technologies (ESaT 2016), held from 29th of June until the 1st of July 2016 in the scenic High Tatras Mountains, Tatranské Matliare, Slovak Republic. After the successful implementation and excellent feedback of the first international conference ESaT 2015, ESaT 2016 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice, Slovak Republic in collaboration with the University of Miskolc, Hungary. The conference focused on a wide spectrum of topics and subject areas in civil engineering sciences. The proceedings bringing new and original advances and trends in various fields of engineering sciences and technologies that accost a wide range of academics, scientists, researchers and professionals from universities and practice. The authors of the articles originate from different countries around the world guaranteeing the importance, topicality, quality and level of presented results.

Download or read book Concrete Structure Management Guide to Ownership and Good Practice written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction projects are undertaken to meet a variety of business, service and aspirational objectives and needs. The success of a building or an element of infrastructure depends on how well it meets the owner's needs and interests or those of the users. Recent changes in owner attitudes to construction are reflected in an increasing interest in through-life costs, i.e. not only the capital costs of construction but also the operational costs associated with a structure's functional performance for a defined life span. The owner can greatly improve the likelihood of achieving the value they seek from the facility by being intimately and effectively involved in the definition of performance requirements at the start of the construction procurement process. The objective of fib Bulletin 44 is to provide guidance to owners of concrete structures on: the management of their concrete structures (buildings and infrastructure) as part of their business goals or the service objectives of their organization; best practice in the management of concrete structures; their responsibilities with respect to the management of their concrete structures; the wider context and issues of service life design; information and direction needed by the supporting professional team of architects, engineers, specifiers, contractors and others. This Guide also provides background information on topics such as deterioration processes and technical procedures used for the management of concrete structures, including reference to international standards for the protection and repair of concrete structures. These activities are illustrated by application examples/case histories and by a section addressing frequently asked questions. A brief review is made of some potential future developments.

Download or read book Durability Design of Concrete Structures written by A. Sarja and published by CRC Press. This book was released on 2004-03-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures can be designed for durability by applying the principles and procedures of reliability theory combined with traditional structural design. This book is the first systematic attempt to introduce into structural design a general theory of structural reliability and existing calculation models for common degradation processes. It

Download or read book Reinforced Concrete Structural Reliability written by Ph.D, Mohamed Abdallah El-Reedy and published by CRC Press. This book was released on 2012-12-15 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural engineers must focus on a structure's continued safety throughout its service life. Reinforced Concrete Structural Reliability covers the methods that enable engineers to keep structures reliable during all project phases, and presents a practical exploration of up-to-date techniques for predicting the lifetime of a structure. The book a

Download or read book Durability Design of Concrete Structures written by A. Sarja and published by . This book was released on 1996 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2022 fib Awards for Outstanding Concrete Structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2022-06-15 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fib has two major missions now. One is to work toward the publication of the Model Code 2020, and the other is to respond to the global movement toward carbon neutrality. While the former is steadily progressing toward completion, the latter will require significant efforts for generations to come. As we all know, cement, the primary material for concrete, is a sector that accounts for 8.5% of the world’s CO2 emissions. And the structural concrete that fib handles consume 60% of that. In other words, we need to know the reality that our structural concrete is emitting 5% of the world’s CO2. From now on, fib members, suppliers, designers, builders, owner’s engineers, and academic researchers will be asked how to solve this difficult problem. In general, most of the CO2 emissions in the life cycle of structural concrete come from the production stage of materials and the use stage after construction, i.e. A1 to A3 and B1 to B5 processes as defined in EN15978. Cement and steel sectors, which are the main materials for structural concrete, are expected to take various measures to achieve zero carbon in their respective sectors by 2050. Until then, we must deal with the transition with our low carbon technologies. Regarding the production stage, the fib has recently launched TG4.8 “Low carbon concrete”. And the latest low carbon technologies will be discussed there. On the other hand, in the use stage, there is very little data on the relationship between durability and intervention and maintenance so far. The data accumulation here is the work of the fib, a group of various experts on structural concrete. Through-life management using highly durable structures and precise monitoring will enable to realize minimum maintenance in the use stage and to minimize CO2 emissions. Furthermore, it is also possible to contribute to the reduction of CO2 emissions in the further stage after the first cycle by responding to the circular economy, that is, deconstruction (C), reuse, and recycle (D). However, the technology in this field is still in its infancy, and further research and development is expected in the future. As described above, structural concrete can be carbon neutral in all aspects of its conception, and it can make a significant contribution when it is realized. The fib will have to address these issues in the future. Of course, it will not be easy, and it will take time. However, if we do not continue our efforts as the only international academic society on structural concrete in the world to achieve carbon neutrality, the significance of our very existence may be questioned. Long before Portland cement was invented, Roman concrete, made of volcanic ash and other materials, was the ultimate low-carbon material, and is still in use 2’000 years later because of its non-reinforced structure and lack of deterioration factors. Reinforced concrete, which made it possible to apply concrete to structures other than arches and domes, is only 150 years old. Prestressed concrete is even younger, with only 80 years of history. Now that we think about it, we realize that Roman concrete, which is non-reinforced low carbon concrete, is one of the examples of problem solving that we are trying to achieve. We have new materials, such as coated reinforcement, FRP, and fiber reinforced concrete, which can be used in any structural form. To overcome this challenge with all our wisdom would be to live up to the feat the Romans accomplished 2’000 years ago. Realizing highly durable and elegant structures with low-carbon concrete is the key to meet the demands of the world in the future. I hope you will enjoy reading this AOS brochure showing the Outstanding Concrete Structures Awards at the fib 2022 Congress in Oslo. And I also hope you will find some clues for the challenges we are facing.

Download or read book Designer s Guide to EN 1990 written by H. Gulvanessian and published by Thomas Telford. This book was released on 2002 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: - General - Requirements - Principles of limit state design - Basic variables - Structural analysis and design assisted by testing - Verification by the partial factor method - Annex A1 (normative) - Application for buildings - Management of structural reliability for construction works - Basis for partial factor design and reliability analysis - Design assisted by testing - Appendix A: The Construction Products Directive (89/106/EEC) - Appendix B: The Eurocode Suite - Appendix C: Basic statistical terms and techniques - Appendix D: National standard organizations

Download or read book Aspects of Structural Reliability written by Michael H. Faber and published by Herbert Utz Verlag. This book was released on 2007 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Concrete Textbook Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Download or read book Reinforced Concrete Structural Reliability written by Mohamed Abdallah El-Reedy, Ph.D and published by CRC Press. This book was released on 2012-12-15 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural engineers must focus on a structure’s continued safety throughout its service life. Reinforced Concrete Structural Reliability covers the methods that enable engineers to keep structures reliable during all project phases, and presents a practical exploration of up-to-date techniques for predicting the lifetime of a structure. The book also helps readers understand where the safety factors used come from and addresses the problems that arise from deviation from these factors. It also examines the question of what code is best to follow for a specific project: the American code, the British Standard, the Eurocode, or other local codes. The author devotes an entire chapter to practical statistics methods and probability theory used in structural and civil engineering, both important for calculating the probability of structural failure (reliability analysis). The text addresses the effects of time, environmental conditions, and loads to assess consequences on older structures as well as to calculate the probability of failure. It also presents the effects of steel bar corrosion and column corrosion, and precautions to consider along with guides for design. This book offers guidelines and tools to evaluate existing as well as new structures, providing all available methods and tests for assessing structures, including visual inspection and nondestructive testing for concrete strength. It also presents techniques for predicting the remaining service life of a structure, which can be used to determine whether to perform repairs or take other action. This practical guide helps readers to differentiate between and understand the philosophy of the various codes and standards, enabling them to work anywhere in the world. It will aid engineers at all levels working on projects from the design to the maintenance phase, increasing their grasp of structure behavior, codes and factors, and predicting service life.

Download or read book Reliability of concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1991-07-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety and performance concept Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Download or read book 2018 fib Awards for Outstanding Concrete Structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2018-10-08 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fib Awards for Outstanding Concrete Structures are attributed every four years at the fib Congress, with the goal of enhancing the international recognition of concrete structures that demonstrate the versatility of concrete as a structural medium. The award consists of a bronze plaque to be displayed on the structure, and certificates presented to the main parties responsible for the work. Applications are invited by the fib secretariat via the National Member Groups. Information on the competition is also made available on the fib’s website, and in the newsletter fib-news published in Structural Concrete. The submitted structures must have been completed during the four years prior to the year of the Congress at which the awards are attributed. The jury may accept an older structure, completed one or two years before, provided that it was not already submitted for the previous award attribution (Mumbai, 2014). The submitted structures must also have the support of an fib Head of Delegation or National Member Group Secretary in order to confirm the authenticity of the indicated authors. Entries consist of the completed entry form, three to five representative photos of the whole structure and/or any important details or plans, and short summary texts explaining: - the history of the project; - description of the structure; - particularities of its realisation (difficulties encountered, special solutions found, etc.). A jury designated by the Presidium selects the winners. The awards are attributed in two categories, Civil Engineering Structures (including bridges) and Buildings. Two or three ‘Winners’ and two to four ‘Special Mention’ recipients are selected in each category, depending on the number of entries received. The jury takes into account criteria such as: - design aspects, including aesthetics and design detailing; - construction practice and quality of work; - environmental aspects of the design and its construction; - durability and sustainability aspects; - significance of the contribution made by the entry to the development and improvement of concrete construction. The decisions of the jury are definitive and cannot be challenged. They are unveiled at a special ceremony during the fib Congress in Melbourne.

Download or read book Reliability Basis of Load and Resistance Factors for Reinforced Concrete Design written by Bruce R. Ellingwood and published by . This book was released on 1978 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Durable Concrete Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1992 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide allies basic knowledge with current engineering experience of the durability of concrete structures. It presents appropriate solutions for different environmental conditions. The complex nature of environmental effects on structures requires improved materials, as well as measures at the architectural design phase, and proper inspection and maintenance procedures.