Download or read book Relative Susceptibility of Titanium Alloys to Hot salt Stress corrosion written by Hugh R. Gray and published by . This book was released on 1971 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Susceptibility of titanium alloys to hot-salt stress-corrosion cracking increased as follows: Ti-2Al-11Sn-5Zr-0.2Si(679), Ti-6Al-2Sn-4Zr-2Mo(6242), Ti-6Al-4V(64), Ti-6Al-4V-3Co(643), Ti-8Al-1Mo-1V(811), and Ti-13V-11Cr-3A1(13-11-3). The Ti-5Al-6Sn-2Zr-1Mo-0.25Si(5621S) alloy was both the least and most susceptible depending on heat treatment. Such rankings can be drastically altered by heat-to-heat and processing variations. Residual compressive stresses and cyclic exposures also reduce susceptibility to stress-corrosion. Simulated turbine-engine compressor environmental variables such as air velocity, pressure, dewpoint, salt concentration, and salt deposition temperature have only minor effects. Detection of substantial concentrations of hydrogen in all corroded alloys confirmed the existence of a hydrogen embrittlement mechanism.--P. [i].
Download or read book NASA Technical Note written by and published by . This book was released on 1972 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot salt Stress corrosion of a Titanium Alloy Under a Simulated Turbine engine Compressor Environment written by Hugh R. Gray and published by . This book was released on 1969 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot salt stress corrosion Cracking and Its Effect on Tensile Properties of Ti 8Al 1Mo 1V Titanium alloy Sheet written by Dick M. Royster and published by . This book was released on 1968 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot salt stress corrosion Cracking and Its Effect on Tensile and Stress rupture Properties of Ti 6Al 4V Titanium alloy Sheet written by Dick M. Royster and published by . This book was released on 1969 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Salt stress corrosion cracking effects on tensile and stress rupture properties of titanium alloy sheet.
Download or read book Materials Properties Handbook written by Gerhard Welsch and published by ASM International. This book was released on 1993-12-31 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive datasheets on more than 60 titanium alloys More than 200 pages on metallurgy and fabrication procedures Input from more than 50 contributors from several countries Careful editorial review for accuracy and usefulness. Materials Properties Handbook: Titanium Alloys provides a data base for information on titanium and its alloys, and the selection of specific alloys for specific applications. The most comprehensive titanium data package ever assembled provides extensive information on applications, physical properties, corrosion, mechanical properties (including design allowances where available), fatigue, fracture properties, and elevated temperature properties. The appropriate specifications for each alloy are included. This international effort has provided a broad information base that has been compiled and reviewed by leading experts within the titanium industry, from several countries, encompassing numerous technology areas. Inputs have been obtained from the titanium industry, fabricators, users, government and academia. This up-to-date package covers information from almost the inception of the titanium industry, in the 1950s, to mid-1992. The information, organized by alloy, makes this exhaustive collection an easy-to-use data base at your fingertips, which generally includes all the product forms for each alloy. The 60-plus data sheets supply not only extensive graphical and tabular information on properties, but the datasheets also describe or illustrate important factors which would aid in the selection of the proper alloy or heat treatment. The datasheets are further supplemented with back-ground information on the metallurgy and fabrication characteristics of titanium alloys. An especially extensive coverage of properties, processing and metallurgy is provided in the datasheet for the workhorse of the titanium industry, Ti-6Al-4V. This compendium includes the newest alloys made public. even those still under development. In many cases, key references are included for further information on a given subject. Comprehensive datasheets provide extensive information on: Applications, Specifications, Corrosion, Mechanical Design Properties, Fatigue and Fracture
Download or read book Applications Related Phenomena in Titanium Alloys Stp 432 written by American Society for Testing and Materials and published by ASTM International. This book was released on 1968-04 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Monthly Catalog of United States Government Publications Cumulative Index written by United States. Superintendent of Documents and published by . This book was released on 1976 with total page 1466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Relative Susceptibility of Four Commercial Titanium Alloys to Salt Stress Corrosion at 5500 F written by David N. Braski and published by . This book was released on 1963 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science Technology and Application of Titanium written by R. I. Jaffee and published by Elsevier. This book was released on 2013-09-24 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968. The papers explore scientific and technological developments as well as applications of titanium and cover topics ranging from processing of titanium to its chemical and environmental behavior, physics, thermodynamics, and kinetics. Deformation and fracture, phase transformations and heat treatment, and alloying are also discussed. This book is comprised of 114 chapters and begins with an overview of the titanium industry in Europe and the United States. The reader is then introduced to primary and secondary fabrication of titanium; corrosion and oxidation; physical properties of titanium alloys; interaction of titanium with elements of the periodic system; and elastic interactions between dislocations and twin and grain boundaries in titanium. The crystallography of deformation twinning in titanium is also examined, along with superplasticity and transformation plasticity in titanium. The remaining chapters focus on interstitial strengthening of titanium alloys; mechanism of martensitic transformation in titanium and its alloys; phase relationships in titanium-oxygen alloys; strengthening of titanium alloys by shock deformation; and titanium hot forming. This monograph will be of interest to chemists and metallurgists.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1972 with total page 1932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Longtime Environmental Exposure on Mechanical Properties of Sheet Materials for a Supersonic Transport written by and published by . This book was released on 1968 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1961 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking in High Strength Steels and in Titanium and Aluminum Alloys written by Benjamin Floyd Brown and published by . This book was released on 1972 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Ti 8A1 1Mo 1V Alloy written by R. A. Wood and published by . This book was released on 1965 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
