Download or read book Reinforced Concrete Members Subjected to Biaxial Bending and Axial Load written by William A. Litle and published by . This book was released on 1957 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strength Design for Reinforced concrete Hydraulic Structures written by American Society of Civil Engineers and published by . This book was released on 1993 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength Design for Reinforced-Concrete Hydraulic Structures is written in sufficient detail to not only provide the designer with design procedures, but also to present examples of their application. A review of general detailing requirements, as well as strength and serviceability requirements, create a strong understanding of the strength-design method. Latter chapters feature examples that demonstrate load-factor application, the design of members subjected to combined flexural and axial loads, the design of members subjected to biaxial bending, and the design for shear strength, including provisions for both special straight and curved members.

Download or read book Engineering and Design written by United States. Army. Corps of Engineers and published by . This book was released on 1992 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance for designing reinforced concrete hydraulic structures by the strength-design method. Plain concrete and prestressed concrete are not covered in this manual.

Download or read book Design Charts for Members Subjected to Biaxial Bending and Thrust written by Frederick Norman Pannell and published by . This book was released on 1966 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultimate Strength Analysis of Reinforced and Prestressed Concrete Sections Subjected to Axial Load and Biaxial Bending written by Alejandro Litago Viñerta and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Anglès: Nowadays the European society is living a revolutionary change in their high education system with the coming into effect of the European space for higher education. This new space for higher education was set out in the Bologna declaration. The aim of this declaration is to structure the higher education in a convergent way in 47 countries. In Spain, the application of the Bologna declaration defines a completely opposite philosophy in higher education. The way the lecturers used to organize their degrees in Spain was based in a master class were the interaction between the teacher and their students was almost zero. The evaluation method was based in a final examination were the student had to answer the final exam and its final mark was hundred per cent based on its exam's result. With the coming into effect of the European space for higher education, everybody's role has changed. Now, the lecturers are expected not to dazzle their students with a master class but to direct their students' efforts toward the topics they have not properly understood, mentoring their day by day work. The students are expected to work an amount of hours per week by themselves in different tasks and going into the topics. This new paradigm in the higher education applied to the schools of civil engineering and more specifically to the reinforced concrete area demands new educational tools to make easier for the students to work out the calculations. The key point of these tools is to let the students be focused in the different theoretical parts of the problem and at the same time to let them work out many different cases without having to repeat every time some calculations which are already assumed as known from previous courses. Therefore, they can see how the different parameters (Reinforced area, concrete cross section, etc.) change the final result by themselves, without their lecturers' help. These tools must be focused on improving the learning performance in the important and most difficult topics. This dissertation's target is to develop one of these tools to work out the reinforced and prestressed concrete interaction diagram for section subjected to axial load and biaxial bending moment, helping the students with a useful tool to work out one of the most common problems in reinforced beams.

Download or read book Behavior of Channel shaped Reinforced Concrete Columns Under Combined Biaxial Bending and Compression written by Dureseti Chidambarrao and published by . This book was released on 1983 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: He inelastic behavior of irregular shaped reinforced concrete columns has been a constant concern for a structural engineer, to design a safe and economic structure in modern buildings and bridge piers. The shape of the elements in a reinforced concrete structure may be used to optimize its structural strength, to make better use of the available space, to improve the aesthetic appearance of the structure, or to facilitate construction. Due to the locations of the columns, the shapes of the buildings and the nature of the applied loads, many columns are subject to combined biaxial bending and axial load. Seven 1/4 scale direct models of the short, tied columns with channel-shaped cross sections were constructed for the present investigation. All the specimens were tested and studied for their complete strength and deformation behavior under combined biaxial bending moments and axial compression, and were used to examine some of the variables involved such as relative eccentricities and loading variations. The end conditions are assumed to be pinned-ended. The experimental load-strain and biaxial moment-curvature curves have been compared with the analytical results of the strength and deformation for biaxially loaded channel-shaped column members, and a satisfactory agreement was obtained from zero up to the ultimate load condition. The above inelastic behavior of channel-shaped reinforced concrete columns has formed the basis of the redistribution of the moments and forces in a statically indeterminate structure, and these characteristics can also be found useful for the limit analysis and design of reinforced concrete structures.

Download or read book Design of Reinforced Concrete Sections Under Bending and Axial Forces written by Helena Barros and published by Springer Nature. This book was released on 2022-01-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.

Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.

Download or read book Ductility of Reinforced Concrete Sections Subjected to Axial Load and Biaxial Bending written by Juan Rueda Cortijo and published by . This book was released on 1989 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Design of Arbitrary shaped Concrete Members Subject to Biaxial Bending and Axial Compression written by Edelberto E. Castillo Campbell and published by . This book was released on 1992 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Study of Combined Bending and Axial Load in Reinforced Concrete Members written by Eivind Hognestad and published by . This book was released on 1951 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Members Subjected to Bending and Direct Force written by John David Bennett and published by . This book was released on 1962 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Moment rotation Characteristics of Reinforced Concrete Members Subjected to Bending Shear and Axial Load written by Ricardo Yamashiro and published by . This book was released on 1962 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Hydraulic Structures written by R. E. D. Dot RED DOT PUBLICATIONS and published by . This book was released on 2017-12-21 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance for designing reinforced concrete hydraulic structures by the strength-design method.Scopea. This manual is written in sufficient detail to not only provide the designer with design procedures but to also provide examples of their application. Also, derivations of the combined flexural and axial load equations are given to increase the designer's confidence and understanding.b. General detailing requirements are presented in Chapter 2. Chapter 3 presents strength and serviceability requirements, including load factors and limits on flexural reinforcement. Design equations for members subjected to flexural and/or axial loads (including biaxial bending) are given in Chapter 4. Chapter 5 presents guidance for design for shear, including provisions for curved members and special straight members. The appendices include notation, equation derivations, and examples. The examples demonstrate load-factor application, design of members subjected to combined flexural and axial loads, design for shear, development of an interaction diagram, and design of members subjected to biaxial bending.

Download or read book Behavior and analysis of reinforced concrete structures under alternate actions inducing inelastic response written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Study of Combines Bending and Axial Load in Reinforced Concrete Members written by University of Illinois. Engineering Experiment Station and published by . This book was released on 1951 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete written by Edward G. Nawy and published by . This book was released on 2000 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Edward G. Nawys highly acclaimed work reflects the very latest ACI-99 Building Code and includes these major changes and additions: *Numerous alternate solutions using SI Units and lists of equations in SI format for the various topics *A completely rewritten chapter on seismic design of buildings to comply with the major changes in the ACT 318 Code and detailing the new International Building Code provisions (IBC 2000) on seismic design which replaced all other existing codes in the US. The chapter has several new examples on confinement, shear wall design, and detailing in accordance with the IBC 2000 Code *A new section with design examples on the new provisions for crack control *a new section on flexure using the limits strain approach of Appendix B in the ACI Code. All examples in the previous edition using the standard stress approach have also been solved by the strain limits approach *A new section on biaxial bending with new design examples using the reciprocal load approach as well as an easier to use Modified Load Contour method *A comprehensive chapter on concrete materials and design of concrete mixtures for normal strength and for high strength, h