Download or read book Retrofitting of Concrete Structures by Externally Bonded FRPs With Emphasis on Seismic Applications written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 35 is the first bulletin to publish documentation from an fib short course. These courses are held worldwide and cover advanced knowledge of structural concrete in general, or specific topics. They are organized by fib and given by internationally recognized experts in fib, often supplemented with local experts active in fib. They are based on the knowledge and expertise from fib's ten Commissions and nearly fifty Task Groups. fib Bulletin 35 presents the course materials developed for the short course "Retrofitting of Concrete Structures through Externally Bonded FRP, with emphasis on Seismic Applications", given in Ankara and Istanbul in June 2005. The course drew on expertise both from outside Turkey and from the large pool of local experts on this subject. In most countries of the world, the building stock is ageing and needs continuous maintenance or repair. Moreover, the majority of existing constructions are deficient in the light of current knowledge and design codes. The problem of structural deficiency of existing constructions is especially acute in seismic regions, as, even there, seismic design of structures is relatively recent. The direct and indirect costs of demolition and reconstruction of structurally deficient constructions are often prohibitive; furthermore they entail a substantial waste of natural resources and energy. Therefore, structural retrofitting is becoming increasingly widespread throughout the world. Externally bonded Fibre Reinforced Polymers (FRPs) are rapidly becoming the technique of choice for structural retrofitting. They are cleaner and easier to apply than conventional retrofitting techniques, reduce disruption to the occupancy and operation of the facility, do not generate debris or waste, and reduce health and accident hazards at the construction site as well as noise and air pollution in the surroundings. fib Bulletin 35 gives state-of-the-art coverage of retrofitting through FRPs and presents relevant provisions from three recent standardisation milestones: EN 1998-3:2005 "Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings", the 2005 Draft of the Turkish seismic design code, and the Italian regulatory document CNR-DT 200/04, "Instructions for Design, Execution and Control of Strengthening Interventions by Means of Fibre-Reinforced Composites" (2004).
Download or read book Strengthening of Reinforced Concrete Structures written by Leonard Hollaway and published by McGraw Hill Professional. This book was released on 1999-03-05 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforced polymer composite plates. The authors also discuss plate bonding onto other engineering materials such as steel and cast iron. The book has been designed for practising civil and structural engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduates and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering.
Download or read book Seismic Assessment and Retrofit of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-08-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most parts of the developed world, the building stock and the civil infrastructure are ageing and in constant need of maintenance, repair and upgrading. Moreover, in the light of our current knowledge and of modern codes, the majority of buildings stock and other types of structures in many parts of the world are substandard and deficient. This is especially so in earthquake-prone regions, as, even there, seismic design of structures is relatively recent. In those regions the major part of the seismic threat to human life and property comes from old buildings. Due to the infrastructure's increasing decay, frequently combined with the need for structural upgrading to meet more stringent design requirements (especially against seismic loads), structural retrofitting is becoming more and more important and receives today considerable emphasis throughout the world. In response to this need, a major part of the fib Model Code 2005, currently under development, is being devoted to structural conservation and maintenance. More importantly, in recognition of the importance of the seismic threat arising from existing substandard buildings, the first standards for structural upgrading to be promoted by the international engineering community and by regulatory authorities alike are for seismic rehabilitation of buildings. This is the case, for example, of Part 3: Strengthening and Repair of Buildings of Eurocode 8 (i. e. of the draft European Standard for earthquake-resistant design), and which is the only one among the current (2003) set of 58 Eurocodes attempting to address the problem of structural upgrading. It is also the case of the recent (2001) ASCE draft standard on Seismic evaluation of existing buildings and of the 1996 Law for promotion of seismic strengthening of existing reinforced concrete structures in Japan. As noted in Chapter 1 of this Bulletin, fib - as CEB and FIP did before - has placed considerable emphasis on assessment and rehabilitation of existing structures. The present Bulletin is a culmination of this effort in the special but very important field of seismic assessment and rehabilitation. It has been elaborated over a period of 4 years by Task Group 7.1 Assessment and retrofit of existing structures of fib Commission 7 Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In the course of its work the team had six plenary two-day meetings: in January 1999 in Pavia, Italy; in August 1999 in Raleigh, North Carolina; in February 2000 in Queenstown, New Zealand; in July 2000 in Patras, Greece; in March 2001 in Lausanne, Switzerland; and in August 2001 in Seattle, Washington. In October 2002 the final draft of the Bulletin was presented to public during the 1st fib Congress in Osaka. It was also there that it was approved by fib Commission 7 Seismic Design. The contents is structured into main chapters as follows: 1 Introduction - 2 Performance objectives and system considerations - 3 Review of seismic assessment procedures - 4 Strength and deformation capacity of non-seismically detailed components - 5 Seismic retrofitting techniques - 6 Probabilistic concepts and methods - 7 Case studies
Download or read book Rehabilitation of Concrete Structures with Fiber Reinforced Polymer written by Riadh Al-Mahaidi and published by Butterworth-Heinemann. This book was released on 2018-11-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of Concrete Structures with Fiber Reinforced Polymer is a complete guide to the use of FRP in flexural, shear and axial strengthening of concrete structures. Through worked design examples, the authors guide readers through the details of usage, including anchorage systems, different materials and methods of repairing concrete structures using these techniques. Topics include the usage of FRP in concrete structure repair, concrete structural deterioration and rehabilitation, methods of structural rehabilitation and strengthening, a review of the design basis for FRP systems, including strengthening limits, fire endurance, and environmental considerations. In addition, readers will find sections on the strengthening of members under flexural stress, including failure modes, design procedures, examples and anchorage detailing, and sections on shear and torsion stress, axial strengthening, the installation of FRP systems, and strengthening against extreme loads, such as earthquakes and fire, amongst other important topics. - Presents worked design examples covering flexural, shear, and axial strengthening - Includes complete coverage of FRP in Concrete Repair - Explores the most recent guidelines (ACI440.2, 2017; AS5100.8, 2017 and Concrete society technical report no. 55, 2012)
Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative resource for materials properties, their evaluation, and industrial applications The Handbook of Materials Selection provides information and insight that can be employed in any discipline or industry to exploit the full range of materials in use today-metals, plastics, ceramics, and composites. This comprehensive organization of the materials selection process includes analytical approaches to materials selection and extensive information about materials available in the marketplace, sources of properties data, procurement and data management, properties testing procedures and equipment, analysis of failure modes, manufacturing processes and assembly techniques, and applications. Throughout the handbook, an international roster of contributors with a broad range of experience conveys practical knowledge about materials and illustrates in detail how they are used in a wide variety of industries. With more than 100 photographs of equipment and applications, as well as hundreds of graphs, charts, and tables, the Handbook of Materials Selection is a valuable reference for practicing engineers and designers, procurement and data managers, as well as teachers and students.
Download or read book ACI 440 2R 17 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures written by ACI Committee 440 and published by . This book was released on 2017-04-27 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Fiber Reinforced Polymer FRP Composites for Civil Engineering written by Nasim Uddin and published by Elsevier. This book was released on 2013-05-15 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber-reinforced polymer (FRP) composite materials has had a dramatic impact on civil engineering techniques over the past three decades. FRPs are an ideal material for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Developments in fiber-reinforced polymer (FRP) composites for civil engineering outlines the latest developments in fiber-reinforced polymer (FRP) composites and their applications in civil engineering.Part one outlines the general developments of fiber-reinforced polymer (FRP) use, reviewing recent advancements in the design and processing techniques of composite materials. Part two outlines particular types of fiber-reinforced polymers and covers their use in a wide range of civil engineering and structural applications, including their use in disaster-resistant buildings, strengthening steel structures and bridge superstructures.With its distinguished editor and international team of contributors, Developments in fiber-reinforced polymer (FRP) composites for civil engineering is an essential text for researchers and engineers in the field of civil engineering and industries such as bridge and building construction. - Outlines the latest developments in fiber-reinforced polymer composites and their applications in civil engineering - Reviews recent advancements in the design and processing techniques of composite materials - Covers the use of particular types of fiber-reinforced polymers in a wide range of civil engineering and structural applications
Download or read book Strengthening and Rehabilitation of Civil Infrastructures Using Fibre Reinforced Polymer FRP Composites written by L C Hollaway and published by Elsevier. This book was released on 2008-07-18 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The repair of deteriorated, damaged and substandard civil infrastructures has become one of the most important issues for the civil engineer worldwide. This important book discusses the use of externally-bonded fibre-reinforced polymer (FRP) composites to strengthen, rehabilitate and retrofit civil engineering structures, covering such aspects as material behaviour, structural design and quality assurance.The first three chapters of the book review structurally-deficient civil engineering infrastructure, including concrete, metallic, masonry and timber structures. FRP composites used in rehabilitation and surface preparation of the component materials are also reviewed. The next four chapters deal with the design of FRP systems for the flexural and shear strengthening of reinforced concrete (RC) beams and the strengthening of RC columns. The following two chapters examine the strengthening of metallic and masonry structures with FRP composites. The last four chapters of the book are devoted to practical considerations in the flexural strengthening of beams with unstressed and prestressed FRP plates, durability of externally bonded FRP composite systems, quality assurance and control, maintenance, repair, and case studies.With its distinguished editors and international team of contributors, Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites is a valuable reference guide for engineers, scientists and technical personnel in civil and structural engineering working on the rehabilitation and strengthening of the civil infrastructure. - Reviews the use of fibre-reinforced polymer (FRP) composites in structurally damaged and sub-standard civil engineering structures - Examines the role and benefits of fibre-reinforced polymer (FRP) composites in different types of structures such as masonry and metallic strengthening - Covers practical considerations including material behaviour, structural design and quality assurance
Download or read book Composites for Construction written by Lawrence C. Bank and published by John Wiley & Sons. This book was released on 2006-07-21 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on the design of FRP for structural engineering applications Composites for Construction is a one-of-a-kind guide to understanding fiber-reinforced polymers (FRP) and designing and retrofitting structures with FRP. Written and organized like traditional textbooks on steel, concrete, and wood design, it demystifies FRP composites and demonstrates how both new and retrofit construction projects can especially benefit from these materials, such as offshore and waterfront structures, bridges, parking garages, cooling towers, and industrial buildings. The code-based design guidelines featured in this book allow for demonstrated applications to immediately be implemented in the real world. Covered codes and design guidelines include ACI 440, ASCE Structural Plastics Design Manual, EUROCOMP Design Code, AASHTO Specifications, and manufacturer-published design guides. Procedures are provided to the structural designer on how to use this combination of code-like documents to design with FRP profiles. In four convenient sections, Composites for Construction covers: * An introduction to FRP applications, products and properties, and to the methods of obtaining the characteristic properties of FRP materials for use in structural design * The design of concrete structural members reinforced with FRP reinforcing bars * Design of FRP strengthening systems such as strips, sheets, and fabrics for upgrading the strength and ductility of reinforced concrete structural members * The design of trusses and frames made entirely of FRP structural profiles produced by the pultrusion process
Download or read book Fibre Reinforced Polymer Reinforcement for Concrete Structures written by Kiang Hwee Tan and published by World Scientific. This book was released on 2003 with total page 1526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards.
Download or read book FRP written by J. G. Teng and published by John Wiley & Sons. This book was released on 2002 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) composites are used to strengthen reinforced concrete (RC) structures. A large amount of research now exists on this. This book brings together all existing research into one volume.
Download or read book Fibre reinforced Polymer Reinforcement For Concrete Structures In 2 Volumes Proceedings Of The Sixth International Symposium On Frp Reinforcement For Concrete Structures Frprcs 6 written by Kiang Hwee Tan and published by World Scientific. This book was released on 2003-06-20 with total page 1526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) reinforcement has been used in construction as either internal or external reinforcement for concrete structures in the past decade. This book provides the latest research findings related to the development, design and application of FRP reinforcement in new construction and rehabilitation works. The topics include FRP properties and bond behaviour, externally bonded reinforcement for flexure, shear and confinement, FRP structural shapes, durability, member behaviour under sustained loads, fatigue loads and blast loads, prestressed FRP tendons, structural strengthening applications, case studies, and codes and standards.
Download or read book Strengthening and Retrofitting of Existing Structures written by Aníbal Costa and published by Springer. This book was released on 2017-10-13 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of strengthening and retrofitting approaches, solutions and technologies for existing structures. It addresses in detail specific techniques for the strengthening of traditional constructions, reinforced concrete buildings, bridges and their foundations. Finally, it discusses issues related to standards and economic decision support tools for retrofitting.
Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques.Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete.With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. - Provides a review of concrete deterioration and damage - Discusses condition assessment and repair techniques, standards and guidelines
Download or read book Structural Rehabilitation of Old Buildings written by Aníbal Costa and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book describes the different construction systems and structural materials and elements within the main buildings typologies, and it analyses the particularities of each of them, including, at the end, general aspects concerning laboratory and in-situ testing, numerical modeling, vulnerability assessment and construction maintenance.
Download or read book Seismic Retrofit of Existing Reinforced Concrete Buildings written by Stelios Antoniou and published by John Wiley & Sons. This book was released on 2023-04-24 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Retrofit of Existing Reinforced Concrete Buildings Understand the complexities and challenges of retrofitting building infrastructure Across the world, buildings are gradually becoming structurally unsound. Many were constructed before seismic load capacity was a mandatory component of building standards, and were often built with low-quality materials or using unsafe construction practices. Many more are simply aging, with materials degrading, and steel corroding. As a result, efforts are ongoing to retrofit existing structures, and to develop new techniques for assessing and enhancing seismic load capacity in order to create a safer building infrastructure worldwide. Seismic Retrofit of Existing Reinforced Concrete Buildings provides a thorough book-length discussion of these techniques and their applications. Balancing theory and practice, the book provides engineers with a broad base of knowledge from which to approach real-world seismic assessments and retrofitting projects. It incorporates knowledge and experience frequently omitted from the building design process for a fuller account of this critical engineering subfield. Seismic Retrofit of Existing Reinforced Concrete Buildings readers will also find: Detailed treatment of each available strengthening technique, complete with advantages and disadvantages In-depth guidelines to select a specific technique for a given building type and/or engineering scenario Step-by-step guidance through the assessment/retrofitting process Seismic Retrofit of Existing Reinforced Concrete Buildings is an ideal reference for civil and structural engineering professionals and advanced students, particularly those working in seismically active areas.
Download or read book Advances in FRP Composites in Civil Engineering written by Lieping Ye and published by Springer Science & Business Media. This book was released on 2012-02-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in FRP Composites in Civil Engineering" contains the papers presented at the 5th International Conference on Fiber Reinforced Polymer (FRP) Composites in Civil Engineering in 2010, which is an official conference of the International Institute for FRP in Construction (IIFC). The book includes 7 keynote papers which are presented by top professors and engineers in the world and 203 papers covering a wide spectrum of topics. These important papers not only demonstrate the recent advances in the application of FRP composites in civil engineering, but also point to future research endeavors in this exciting area. Researchers and professionals in the field of civil engineering will find this book is exceedingly valuable. Prof. Lieping Ye and Dr. Peng Feng both work at the Department of Civil Engineering, Tsinghua University, China. Qingrui Yue is a Professor at China Metallurgical Group Corporation.