Download or read book Regression Models for Categorical Count and Related Variables written by John P. Hoffmann and published by Univ of California Press. This book was released on 2016-08-16 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Social science and behavioral science students and researchers are often confronted with data that are categorical, count a phenomenon, or have been collected over time. Sociologists examining the likelihood of interracial marriage, political scientists studying voting behavior, criminologists counting the number of offenses people commit, health scientists studying the number of suicides across neighborhoods, and psychologists modeling mental health treatment success are all interested in outcomes that are not continuous. Instead, they must measure and analyze these events and phenomena in a discrete manner. This book provides an introduction and overview of several statistical models designed for these types of outcomes—all presented with the assumption that the reader has only a good working knowledge of elementary algebra and has taken introductory statistics and linear regression analysis. Numerous examples from the social sciences demonstrate the practical applications of these models. The chapters address logistic and probit models, including those designed for ordinal and nominal variables, regular and zero-inflated Poisson and negative binomial models, event history models, models for longitudinal data, multilevel models, and data reduction techniques such as principal components and factor analysis. Each chapter discusses how to utilize the models and test their assumptions with the statistical software Stata, and also includes exercise sets so readers can practice using these techniques. Appendices show how to estimate the models in SAS, SPSS, and R; provide a review of regression assumptions using simulations; and discuss missing data. A companion website includes downloadable versions of all the data sets used in the book.

Download or read book Regression Models for Categorical Dependent Variables Using Stata Second Edition written by J. Scott Long and published by Stata Press. This book was released on 2006 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the book is to make easier to carry out the computations necessary for the full interpretation of regression nonlinear models for categorical outcomes usign Stata.

Download or read book Regression Models for Categorical and Limited Dependent Variables written by J. Scott Long and published by SAGE. This book was released on 1997-01-09 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluates the most useful models for categorical and limited dependent variables (CLDVs), emphasizing the links among models and applying common methods of derivation, interpretation, and testing. The author also explains how models relate to linear regression models whenever possible. Annotation c.

Download or read book Regression Models for Categorical Dependent Variables Using Stata written by J. Scott Long and published by . This book was released on 2006 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Regression Models for Categorical and Count Data written by Peter Martin and published by SAGE. This book was released on 2022-03-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides practical guidance on conducting regression analysis on categorical and count data. Step by step and supported by lots of helpful graphs, it covers both the theoretical underpinnings of these methods as well as their application, giving you the skills needed to apply them to your own research. It offers guidance on: · Using logistic regression models for binary, ordinal, and multinomial outcomes · Applying count regression, including Poisson, negative binomial, and zero-inflated models · Choosing the most appropriate model to use for your research · The general principles of good statistical modelling in practice Part of The SAGE Quantitative Research Kit, this book will give you the know-how and confidence needed to succeed on your quantitative research journey

Download or read book Analyzing Categorical Data written by Jeffrey S. Simonoff and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Categorical data arise often in many fields, including biometrics, economics, management, manufacturing, marketing, psychology, and sociology. This book provides an introduction to the analysis of such data. The coverage is broad, using the loglinear Poisson regression model and logistic binomial regression models as the primary engines for methodology. Topics covered include count regression models, such as Poisson, negative binomial, zero-inflated, and zero-truncated models; loglinear models for two-dimensional and multidimensional contingency tables, including for square tables and tables with ordered categories; and regression models for two-category (binary) and multiple-category target variables, such as logistic and proportional odds models. All methods are illustrated with analyses of real data examples, many from recent subject area journal articles. These analyses are highlighted in the text, and are more detailed than is typical, providing discussion of the context and background of the problem, model checking, and scientific implications. More than 200 exercises are provided, many also based on recent subject area literature. Data sets and computer code are available at a web site devoted to the text. Adopters of this book may request a solutions manual from: [email protected]. From the reviews: "Jeff Simonoff's book is at the top of the heap of categorical data analysis textbooks...The examples are superb. Student reactions in a class I taught from this text were uniformly positive, particularly because of the examples and exercises. Additional materials related to the book, particularly code for S-Plus, SAS, and R, useful for analysis of examples, can be found at the author's Web site at New York University. I liked this book for this reason, and recommend it to you for pedagogical purposes." (Stanley Wasserman, The American Statistician, August 2006, Vol. 60, No. 3) "The book has various noteworthy features. The examples used are from a variety of topics, including medicine, economics, sports, mining, weather, as well as social aspects like needle-exchange programs. The examples motivate the theory and also illustrate nuances of data analytical procedures. The book also incorporates several newer methods for analyzing categorical data, including zero-inflated Poisson models, robust analysis of binomial and poisson models, sandwich estimators, multinomial smoothing, ordinal agreement tables...this is definitely a good reference book for any researcher working with categorical data." Technometrics, May 2004 "This guide provides a practical approach to the appropriate analysis of categorical data and would be a suitable purchase for individuals with varying levels of statistical understanding." Paediatric and Perinatal Epidemiology, 2004, 18 "This book gives a fresh approach to the topic of categorical data analysis. The presentation of the statistical methods exploits the connection to regression modeling with a focus on practical features rather than formal theory...There is much to learn from this book. Aside from the ordinary materials such as association diagrams, Mantel-Haenszel estimators, or overdispersion, the reader will also find some less-often presented but interesting and stimulating topics...[T]his is an excellent book, giving an up-to-date introduction to the wide field of analyzing categorical data." Biometrics, September 2004 "...It is of great help to data analysts, practitioners and researchers who deal with categorical data and need to get a necessary insight into the methods of analysis as well as practical guidelines for solving problems." International Journal of General Systems, August 2004 "The author has succeeded in writing a useful and readable textbook combining most of general theory and practice of count data." Kwantitatieve Methoden "The book especially stresses how to analyze and interpret data...In fact, the highly detailed multi-page descriptions of analysis and interpretation make the book stand out." Mathematical Geology, February 2005 "Overall, this is a competent and detailed text that I would recommend to anyone dealing with the analysis of categorical data." Journal of the Royal Statistical Society "This important work allows for clear analogies between the well-known linear models for Gaussian data and categorical data problems. ... Jeffrey Simonoff’s Analyzing Categorical Data provides an introduction to many of the important ideas and methods for understanding counted data and tables of counts. ... Some readers will find Simonoff’s style very much to their liking due to reliance on extended real data examples to illuminate ideas. ... I think the extensive examples will appeal to most students." (Sanford Weisberg, SIAM Review, Vol. 47 (4), 2005) "It is clear that the focus of Simonoff’s book is different from other books on categorical data analysis. ... As an introductory textbook, the book is comprehensive enough since all basic topics in categorical data analysis are discussed. ... I think Simonoff’s book is a valuable addition to the literature because it discusses important models for counts ... ." (Jeroen K. Vermunt, Statistics in Medicine, Vol. 24, 2005) "The author based this book on his notes for a class with a very diverse pool of students. The material is presented in such a way that a very heterogeneous group of students could grasp it. All methods are illustrated with analyses of real data examples. The author provides a detailed discussion of the context and background of the problem. ... The book is very interesting and can be warmly recommended to people working with categorical data." (EMS - European Mathematical Society Newsletter, December, 2004) "Categorical data arise often in many fields ... . This book provides an introduction to the analysis of such data. ... All methods are illustrated with analyses of real data examples, many from recent subject-area journal articles. These analyses are highlighted in the text and are more detailed than is typical ... . More than 200 exercises are provided, including many based on recent subject-area literature. Data sets and computer code are available at a Web site devoted to this text." (T. Postelnicu, Zentralblatt MATH, Vol. 1028, 2003) "This book grew out of notes prepared by the author for classes in categorical data analysis. The presentation is fresh and compelling to read. Regression ideas are used to motivate the modelling presented. The book focuses on applying methods to real problems; many of these will be novel to readers of statistics texts ... . All chapters end with a section providing references to books or articles for the inquiring reader." (C.M. O’Brien, Short Book Reviews, Vol. 23 (3), 2003)

Download or read book Regression for Categorical Data written by Gerhard Tutz and published by Cambridge University Press. This book was released on 2011-11-21 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces basic and advanced concepts of categorical regression with a focus on the structuring constituents of regression, including regularization techniques to structure predictors. In addition to standard methods such as the logit and probit model and extensions to multivariate settings, the author presents more recent developments in flexible and high-dimensional regression, which allow weakening of assumptions on the structuring of the predictor and yield fits that are closer to the data. A generalized linear model is used as a unifying framework whenever possible in particular parametric models that are treated within this framework. Many topics not normally included in books on categorical data analysis are treated here, such as nonparametric regression; selection of predictors by regularized estimation procedures; ternative models like the hurdle model and zero-inflated regression models for count data; and non-standard tree-based ensemble methods. The book is accompanied by an R package that contains data sets and code for all the examples.

Download or read book Applications of Regression for Categorical Outcomes Using R written by David Melamed and published by CRC Press. This book was released on 2023-07-26 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the main models within the GLM (i.e., logistic, Poisson, negative binomial, ordinal, and multinomial). For each model, estimations, interpretations, model fit, diagnostics, and how to convey results graphically are provided. There is a focus on graphic displays of results as these are a core strength of using R for statistical analysis. Many in the social sciences are transitioning away from using Stata, SPSS and SAS, to using R, and this book uses statistical models which are relevant to the social sciences. Social Science Applications of Regression for Categorical Outcomes Using R will be useful for graduate students in the social sciences who are looking to expand their statistical knowledge, and for Quantitative social scientists due to it’s ability to act as a practitioners guide. Key Features: Applied- in the sense that we will provide code that others can easily adapt Flexible- R is basically just a fancy calculator. Our programs will enable users to derive quantities that they can use in their work Timely- many in the social sciences are currently transitioning to R or are learning it now. Our book will be a useful resource Versatile- we will write functions into an R package that can be applied to all of the regression models we will cover in the book Aesthetically pleasing- one advantage of R relative to other software packages is that graphs are fully customizable. We will leverage this feature to yield high-end graphical displays of results Affordability- R is free. R packages are free. There is no need to purchase site licenses or updates.

Download or read book Applied Categorical and Count Data Analysis written by Wan Tang and published by CRC Press. This book was released on 2023-04-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed from the authors’ graduate-level biostatistics course, Applied Categorical and Count Data Analysis, Second Edition explains how to perform the statistical analysis of discrete data, including categorical and count outcomes. The authors have been teaching categorical data analysis courses at the University of Rochester and Tulane University for more than a decade. This book embodies their decade-long experience and insight in teaching and applying statistical models for categorical and count data. The authors describe the basic ideas underlying each concept, model, and approach to give readers a good grasp of the fundamentals of the methodology without relying on rigorous mathematical arguments. The second edition covers classic concepts and popular topics, such as contingency tables, logistic regression models, and Poisson regression models, along with modern areas that include models for zero-modified count outcomes, parametric and semiparametric longitudinal data analysis, reliability analysis, and methods for dealing with missing values. As in the first edition, R, SAS, SPSS, and Stata programming codes are provided for all the examples, enabling readers to immediately experiment with the data in the examples and even adapt or extend the codes to fit data from their own studies. Designed for a one-semester course for graduate and senior undergraduate students in biostatistics, this self-contained text is also suitable as a self-learning guide for biomedical and psychosocial researchers. It will help readers analyze data with discrete variables in a wide range of biomedical and psychosocial research fields. Features: Describes the basic ideas underlying each concept and model Includes R, SAS, SPSS and Stata programming codes for all the examples Features significantly expanded Chapters 4, 5, and 8 (Chapters 4-6, and 9 in the second edition Expands discussion for subtle issues in longitudinal and clustered data analysis such as time varying covariates and comparison of generalized linear mixed-effect models with GEE

Download or read book Generalized Linear Models for Categorical and Continuous Limited Dependent Variables written by Michael Smithson and published by CRC Press. This book was released on 2013-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generalized Linear Models for Categorical and Continuous Limited Dependent Variables is designed for graduate students and researchers in the behavioral, social, health, and medical sciences. It incorporates examples of truncated counts, censored continuous variables, and doubly bounded continuous variables, such as percentages. The book provides broad, but unified, coverage, and the authors integrate the concepts and ideas shared across models and types of data, especially regarding conceptual links between discrete and continuous limited dependent variables. The authors argue that these dependent variables are, if anything, more common throughout the human sciences than the kind that suit linear regression. They cover special cases or extensions of models, estimation methods, model diagnostics, and, of course, software. They also discuss bounded continuous variables, boundary-inflated models, and methods for modeling heteroscedasticity. Wherever possible, the authors have illustrated concepts, models, and techniques with real or realistic datasets and demonstrations in R and Stata, and each chapter includes several exercises at the end. The illustrations and exercises help readers build conceptual understanding and fluency in using these techniques. At several points the authors bring together material that has been previously scattered across the literature in journal articles, software package documentation files, and blogs. These features help students learn to choose the appropriate models for their purpose.

Download or read book Regression Models for Categorical Dependent Variables Using Stata Third Edition written by J. Scott Long and published by Stata Press. This book was released on 2014-09-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regression Models for Categorical Dependent Variables Using Stata, Third Edition shows how to use Stata to fit and interpret regression models for categorical data. The third edition is a complete rewrite of the book. Factor variables and the margins command changed how the effects of variables can be estimated and interpreted. In addition, the authors' views on interpretation have evolved. The changes to Stata and to the authors' views inspired the authors to completely rewrite their popular SPost commands to take advantage of the power of the margins command and the flexibility of factor-variable notation. The new edition will interest readers of a previous edition as well as new readers. Even though about 150 pages of appendixes were removed, the third edition is about 60 pages longer than the second. Although regression models for categorical dependent variables are common, few texts explain how to interpret such models; this text fills the void. With the book, Long and Freese provide a suite of commands for model interpretation, hypothesis testing, and model diagnostics. The new commands that accompany the third edition make it easy to include powers or interactions of covariates in regression models and work seamlessly with models estimated with complex survey data. The authors' new commands greatly simplify the use of margins, in the same way that the marginsplot command harnesses the power of margins for plotting predictions. The authors discuss how to use margins and their new mchange, mtable, and mgen commands to compute tables and to plot predictions. They also discuss how to use these commands to estimate marginal effects, averaged either over the sample or at fixed values of the regressors. The authors introduce and advocate a variety of new methods that use predictions to interpret the effect of variables in regression models. The third edition begins with an excellent introduction to Stata and follows with general treatments of the estimation, testing, fit, and interpretation of this class of models. New to the third edition is an entire chapter about how to interpret regression models using predictions—a chapter that is expanded upon in later chapters that focus on models for binary, ordinal, nominal, and count outcomes. Long and Freese use many concrete examples in their third edition. All the examples, datasets, and author-written commands are available on the authors' website, so readers can easily replicate the examples with Stata. This book is ideal for students or applied researchers who want to learn how to fit and interpret models for categorical data.

Download or read book Applied Categorical and Count Data Analysis written by Wan Tang and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Developed from the authors' graduate-level biostatistics course, Applied Categorical and Count Data Analysis explains how to perform the statistical analysis of discrete data, including categorical and count outcomes. The authors have been teaching categorical data analysis courses at the University of Rochester and Tulane University for more than a decade. This book embodies their decade-long experience and insight in teaching and applying statistical models for categorical and count data. The authors describe the basic ideas underlying each concept, model, and approach to give readers a good grasp of the fundamentals of the methodology without relying on rigorous mathematical arguments. The second edition covers classic concepts and popular topics, such as contingency tables, logistic regression models, and Poisson regression models, along with modern areas that include models for zero-modified count outcomes, parametric and semiparametric longitudinal data analysis, reliability analysis, and methods for dealing with missing values. As in the first edition, R, SAS, SPSS, and Stata programming codes are provided for all the examples, enabling readers to immediately experiment with the data in the examples and even adapt or extend the codes to fit data from their own studies. Designed for a one-semester course for graduate and senior undergraduate students in biostatistics, this self-contained text is also suitable as a self-learning guide for biomedical and psychosocial researchers. It will help readers analyze data with discrete variables in a wide range of biomedical and psychosocial research fields"--

Download or read book SPSS Statistics for Data Analysis and Visualization written by Keith McCormick and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dive deeper into SPSS Statistics for more efficient, accurate, and sophisticated data analysis and visualization SPSS Statistics for Data Analysis and Visualization goes beyond the basics of SPSS Statistics to show you advanced techniques that exploit the full capabilities of SPSS. The authors explain when and why to use each technique, and then walk you through the execution with a pragmatic, nuts and bolts example. Coverage includes extensive, in-depth discussion of advanced statistical techniques, data visualization, predictive analytics, and SPSS programming, including automation and integration with other languages like R and Python. You'll learn the best methods to power through an analysis, with more efficient, elegant, and accurate code. IBM SPSS Statistics is complex: true mastery requires a deep understanding of statistical theory, the user interface, and programming. Most users don't encounter all of the methods SPSS offers, leaving many little-known modules undiscovered. This book walks you through tools you may have never noticed, and shows you how they can be used to streamline your workflow and enable you to produce more accurate results. Conduct a more efficient and accurate analysis Display complex relationships and create better visualizations Model complex interactions and master predictive analytics Integrate R and Python with SPSS Statistics for more efficient, more powerful code These "hidden tools" can help you produce charts that simply wouldn't be possible any other way, and the support for other programming languages gives you better options for solving complex problems. If you're ready to take advantage of everything this powerful software package has to offer, SPSS Statistics for Data Analysis and Visualization is the expert-led training you need.

Download or read book Linear Regression Models written by John P. Hoffmann and published by CRC Press. This book was released on 2021-09-12 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in social and behavioral sciences has benefited from linear regression models (LRMs) for decades to identify and understand the associations among a set of explanatory variables and an outcome variable. Linear Regression Models: Applications in R provides you with a comprehensive treatment of these models and indispensable guidance about how to estimate them using the R software environment. After furnishing some background material, the author explains how to estimate simple and multiple LRMs in R, including how to interpret their coefficients and understand their assumptions. Several chapters thoroughly describe these assumptions and explain how to determine whether they are satisfied and how to modify the regression model if they are not. The book also includes chapters on specifying the correct model, adjusting for measurement error, understanding the effects of influential observations, and using the model with multilevel data. The concluding chapter presents an alternative model—logistic regression—designed for binary or two-category outcome variables. The book includes appendices that discuss data management and missing data and provides simulations in R to test model assumptions. Features Furnishes a thorough introduction and detailed information about the linear regression model, including how to understand and interpret its results, test assumptions, and adapt the model when assumptions are not satisfied. Uses numerous graphs in R to illustrate the model’s results, assumptions, and other features. Does not assume a background in calculus or linear algebra, rather, an introductory statistics course and familiarity with elementary algebra are sufficient. Provides many examples using real-world datasets relevant to various academic disciplines. Fully integrates the R software environment in its numerous examples. The book is aimed primarily at advanced undergraduate and graduate students in social, behavioral, health sciences, and related disciplines, taking a first course in linear regression. It could also be used for self-study and would make an excellent reference for any researcher in these fields. The R code and detailed examples provided throughout the book equip the reader with an excellent set of tools for conducting research on numerous social and behavioral phenomena. John P. Hoffmann is a professor of sociology at Brigham Young University where he teaches research methods and applied statistics courses and conducts research on substance use and criminal behavior.

Download or read book An Introduction to Categorical Data Analysis written by Alan Agresti and published by John Wiley & Sons. This book was released on 2018-10-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable new edition of a standard reference The use of statistical methods for categorical data has increased dramatically, particularly for applications in the biomedical and social sciences. An Introduction to Categorical Data Analysis, Third Edition summarizes these methods and shows readers how to use them using software. Readers will find a unified generalized linear models approach that connects logistic regression and loglinear models for discrete data with normal regression for continuous data. Adding to the value in the new edition is: • Illustrations of the use of R software to perform all the analyses in the book • A new chapter on alternative methods for categorical data, including smoothing and regularization methods (such as the lasso), classification methods such as linear discriminant analysis and classification trees, and cluster analysis • New sections in many chapters introducing the Bayesian approach for the methods of that chapter • More than 70 analyses of data sets to illustrate application of the methods, and about 200 exercises, many containing other data sets • An appendix showing how to use SAS, Stata, and SPSS, and an appendix with short solutions to most odd-numbered exercises Written in an applied, nontechnical style, this book illustrates the methods using a wide variety of real data, including medical clinical trials, environmental questions, drug use by teenagers, horseshoe crab mating, basketball shooting, correlates of happiness, and much more. An Introduction to Categorical Data Analysis, Third Edition is an invaluable tool for statisticians and biostatisticians as well as methodologists in the social and behavioral sciences, medicine and public health, marketing, education, and the biological and agricultural sciences.

Download or read book Quantitative Epidemiology written by Xinguang Chen and published by Springer Nature. This book was released on 2022-02-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to train graduate students across disciplines within the fields of public health and medicine, with the goal of guiding them in the transition to independent researchers. It focuses on theories, principles, techniques, and methods essential for data processing and quantitative analysis to address medical, health, and behavioral challenges. Students will learn to access to existing data and process their own data, quantify the distribution of a medical or health problem to inform decision making; to identify influential factors of a disease/behavioral problem; and to support health promotion and disease prevention. Concepts, principles, methods and skills are demonstrated with SAS programs, figures and tables generated from real, publicly available data. In addition to various methods for introductory analysis, the following are featured, including 4-dimensional measurement of distribution and geographic mapping, multiple linear and logistic regression, Poisson regression, Cox regression, missing data imputing, and statistical power analysis.

Download or read book Categorical Data Analysis and Multilevel Modeling Using R written by Xing Liu and published by SAGE Publications. This book was released on 2022-02-25 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Categorical Data Analysis and Multilevel Modeling Using R provides a practical guide to regression techniques for analyzing binary, ordinal, nominal, and count response variables using the R software. Author Xing Liu offers a unified framework for both single-level and multilevel modeling of categorical and count response variables with both frequentist and Bayesian approaches. Each chapter demonstrates how to conduct the analysis using R, how to interpret the models, and how to present the results for publication. A companion website for this book contains datasets and R commands used in the book for students, and solutions for the end-of-chapter exercises on the instructor site.