Download or read book Reeds Vol 4 Naval Architecture for Marine Engineers written by Richard Pemberton and published by Bloomsbury Publishing. This book was released on 2018-10-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the theoretical, fundamental aspects of naval architecture for students preparing for the Class 2 and Class 1 Marine Engineer Officer exams. It introduces the basic foundation themes within naval architecture, (hydrostatics, stability, resistance and powering), using worked examples to show how solutions should be presented for an exam. The topics are ordered in a manner of a typical taught module, to aid the use of the book by lecturers as a compliment to a course. Importantly, this updated edition contains updated text and figures in line with modern practice, including an update of many of the figures to three-dimensional diagrams, and a new section on computer software for naval architecture. The book also includes sample examination questions with worked examples answers to aid students in their learning.
Download or read book Reeds Vol 4 Naval Architecture written by E.A. Stokoe and published by Thomas Reed. This book was released on 2003-08-29 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume four of Reed's Marine Engineering Series" is based on the Naval Architecture syllabuses for the Certificate of Competency for Class 2 and Class 1 Marine Engineer Officers, administered on behalf of the UK Department of Transport and SCOTVEC. Explanatory diagrams and worked examples should assist the student to assimilate the principles, and typical exam questions should test knowledge."
Download or read book Reeds Vol 14 Stealth Warship Technology written by Christopher Lavers and published by A&C Black. This book was released on 2012-12-23 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book to give an insight into a growing area of interest - stealth warship technology - which is crucial for future developments in warship construction. It demonstrates the importance of materials used in warship construction and how this influences all of a naval platform's design parameters. Stealth technology is now considered a critical component within warship design, with interest in the concept of stealth increasing around the globe as naval forces adapt to new challenges. Many new developing nations are now implementing their first generation of stealth technology military hardware. This exciting book explores the full extent of threats to warships and thus the transformational change in naval architecture to incorporate these modern stealth technologies. Discussing the history of stealth technology, with references to well-known aircraft, ships and events in military history, the book also provides readers with a unique opportunity to develop an understanding of the specialist skills required in this naval sector. This is an essential read for anyone interested in stealth design and the issues involved in this evolving technology.
Download or read book Reeds Vol 8 General Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 12 (Motor Engineering for Marine Engineers), this textbook is key for all marine engineering officer cadets. Accessibly written and clearly illustrated, General Engineering Knowledge for Marine Engineers takes into account the varying needs of students studying 'general' marine engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career. It includes the latest equipment, practices and trends in marine engineering, as well as incorporating the 2010 Manila Amendments, particularly relating to management. It is an essential buy for any marine engineering student. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Corrosion, water treatments and tests · Refrigeration and air conditioning · Fuels, such as LNG and LPG · Insulation · Low sulphur fuels · Fire and safety Plus updates to many of the technical engineering drawings.
Download or read book Reeds Vol 13 Ship Stability Powering and Resistance written by Jonathan Ridley and published by A&C Black. This book was released on 2014-04-10 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to concepts of ship stability, resistance and powering relevant to marine professionals, including naval architects and merchant navy deck and engineering officers.
Download or read book Reeds Vol 11 Engineering Drawing written by H.G. Beck and published by Thomas Reed. This book was released on 2006-03-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was compiled to assist students studying for the Department of Trade Engineering Drawing examination for a First and Second Class Certificate of Competency. It will also benefit anyone studying for the Engineering Knowledge paper in Part B of the exam. The DoT requirements differ from standard drawing office practice. In order to determine the engineering knowledge of a candidate, a general assembly drawing is required. Details of the drawing are given in the form of dimensioned pictorial views of the individual components for an item of marine engineering machinery. The candidate's skill as a draughtsman is judged from his attempt at the drawing. It is expected that the particular piece of machinery could be manufactured from the drawing, which necessitates inserting dimensions on a general assembly drawing - a practice not common elsewhere. This established textbook will assist students through the course.
Download or read book Reeds Vol 2 Applied Mechanics for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2021-12-09 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the principal topics in applied mechanics for professional trainees studying Merchant Navy Marine Engineering Certificates of Competency (CoC) as well as the core syllabi in applied mechanics for undergraduates studying for BSc, BEng and MEng degrees in marine engineering, naval architecture and other marine technology related programmes. This new edition has been fully updated to reflect the recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, specifically the increased emphasis that has been placed on colleges and universities now responsible for the academic requirements for those studying for a career in marine engineering. In particular this means the book has been updated to include more information about the general principles and applications of the exercises in the practical world of marine engineering. Each chapter has fully worked examples interwoven into the text, with test examples set at the end of each chapter. Other revisions include examples reflecting modern machines and practice, current legislation and current syllabi.
Download or read book Reeds Vol 3 Applied Thermodynamics for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2022-02-17 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative textbook will cover the principal topics in thermodynamics for officer cadets studying Merchant Navy Marine Engineering Certificates of Competency (CoC) as well as the core syllabi in thermodynamics for undergraduate students in marine engineering, naval architecture and other marine technology related programmes. It will cover the laws of thermodynamics and of perfect gases, their principles and application in a marine environment. This new edition will be fully updated to reflect the recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, including National Diplomas, Higher National Diploma and degree courses. This new content will focus on how the the formulae and calculations apply to the actual workplace, and these updates will open up the potential market in the UK as well as appealing to more of the international market. Each chapter has fully worked examples interwoven into the text, with test examples at the end of each chapter. Other revisions include new material on combined steam and motor propulsion systems, expanded sections on different IC engine cycles, information on the modern use of steam and gas turbines for the production of electrical power, and more.
Download or read book Reeds Vol 1 Mathematics for Marine Engineers written by Kevin Corner and published by A&C Black. This book was released on 2013-07-08 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new edition covers the core subject areas of arithmetic, algebra, mensuration in 2D and 3D, trigonometry and geometry, graphs, calculus and statistics and probability for Marine Engineering students. Initial examples have been designed purely to practise mathematical technique and, once these skills have been mastered, further examples focus on engineering situations where the appropriate skills may be utilised. The practical questions are primarily from a marine engineering background but questions from other disciplines, such as electrical engineering, will also be covered, and reference made to the use of advanced calculators where relevant.
Download or read book Reeds Vol 12 Motor Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2018-09-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol 8 (General Engineering for Marine Engineers), this indispensable textbook comprehensively covers the motor engineering syllabus for marine engineering officer cadets. Starting with the theoretical and practical thermodynamic operating cycles, the book is structured to give a description of the engines and components used to extract energy from fossil fuels and achieve high levels of efficiency. Accessibly written and clearly illustrated, this book is the only guide available for marine engineering students focusing on the knowledge needed for passing the motor engineering certificate of Competency (CoC) examinations. This new edition reflects all developments within the discipline and includes updates and additions on, amongst other things: · Engine emissions and control engineering · Fuel injection · Starting and reversing · Ancillary supply systems · Safety and the environment Plus updates to many of the technical engineering drawings.
Download or read book Reeds Vol 6 Basic Electrotechnology for Marine Engineers written by Christopher Lavers and published by A&C Black. This book was released on 2013-04-26 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive coverage of the basic theoretical work required by marine engineering officers and electrotechnical officers (ETOs), putting into place key fundamental building blocks and topics in electrotechnology before progressing to more complex topics and electromagnetic systems. Revisions will include important new material on emergent technology such as image intensifiers, the increased maritime use of LEDs, examples of ship systems including power distribution systems, and references to modern ship systems, eg. GPS, ECDIS, Radar, AIS, Comms outfits, etc. This essential text offers a truly rigorous approach to the key topic of electrotechnology.
Download or read book Reeds Vol 5 Ship Construction for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2016-06-30 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers ship construction techniques and methods for all classes of Merchant Navy marine deck and engineering Certificates of Competency (CoC) as well as Undergraduate students studying Naval Architecture and Marine Engineering. It is complementary to Volume 4 (Naval Architecture) and Volume 8 (General Engineering Knowledge). Importantly, this new edition contains up-to-date information on modern shipyards, dry-docking procedures and methods of construction. Extensively illustrated, the book also includes sample examination questions with worked examples answers to aid students in their learning.
Download or read book Introduction to Naval Architecture written by Thomas Charles Gillmer and published by . This book was released on 1982-09-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reeds Vol 8 General Engineering Knowledge for Marine Engineers written by Paul Anthony Russell and published by A&C Black. This book was released on 2013-07-22 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to complement Reeds Vol. 12 (Motor Engineering for Marine Engineers), this textbook is key for all marine engineering officer cadets. This new edition has been extensively updated to include the latest equipment, practices and trends in marine engineering, as well as incorporating the 2010 Manila Amendments, particularly relating to Management. Accessibly written and clearly illustrated, this book is the core guide focusing on the knowledge needed for passing the engineering certificate of Competency (CoC) examinations. This key textbook takes into account the varying needs of students studying motor engineering, recognising recent changes to the Merchant Navy syllabus and current pathways to a sea-going engineering career, including National diplomas, Higher National Diploma and degree courses. An essential buy for any marine engineering student.
Download or read book Reeds Vol 5 Ship Construction for Marine Engineers written by Paul Anthony Russell and published by Bloomsbury Publishing. This book was released on 2022-08-04 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative textbook covers ship construction techniques and methods for all classes of the Merchant Navy marine deck and engineering Certificates of Competency (CoC) as well as students studying for degrees and diplomas in Naval Architecture and Marine Engineering. It is complementary to Reeds Vol 4 (Naval Architecture) and Reeds Vol 8 (General Engineering Knowledge). This fully revised edition prioritises the need of these students, recognising recent syllabus changes and current pathways to a sea-going engineering career, with the increased emphasis on academic content to be delivered by colleges and universities. The text has been updated and expanded to reflect recent developments in techniques and materials used, and related changes in ship design, including sample examination questions and worked example answers throughout.
Download or read book Naval Architecture for Non naval Architects written by Harry Benford and published by Society of Naval Architects & Marine Engineers. This book was released on 1991 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: By providing an understanding of the basic concepts of naval architecture, this book is the perfect companion for the maritime professional who is not a naval architect, but needs to be able to communicate effectively with naval architects. Written in engaging and easily understood terms, this book concentrates on two aspects of naval architecture : design and analysis. Technical discussions are almost entirely qualitative rather than quantitative and coverage focuses on conventional ship worthiness, structural integrity, powering requirements and functional capability.
Download or read book Reed s Naval Architecture for Marine Engineers written by Edward Alan Stokoe and published by . This book was released on 1967 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
