Download or read book Recycling and Re use of Waste Rubber written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-05-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of rubber materials is necessary from both an environmental and economic perspective. This book describes everything from the world market to the many novel technologies and processes developed for the re-use and recycling of our common rubber materials. Devulcanization, production of rubber crumbs, reprocessing and manufacture of new materials are thoroughly described and discussed.
Download or read book Recycling and Re use of Waste Rubber written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-05-06 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of rubber materials is necessary from both an environmental and economic perspective. This book describes everything from the world market to the many novel technologies and processes developed for the re-use and recycling of our common rubber materials. Devulcanization, production of rubber crumbs, reprocessing and manufacture of new materials are thoroughly described and discussed.
Download or read book Rubber Recycling written by Jin Kuk Kim and published by Royal Society of Chemistry. This book was released on 2018-10-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber is used in a vast number of products, from tyres on vehicles to disposable surgical gloves. Increasingly both manufacturers and legislators are realising that recycling is essential for environmental sustainability and can improve the cost of manufacture. The volume of rubber waste produced globally makes it difficult to manage as accumulated waste rubber, especially in the form of tyres, can pose a significant fire risk. Recycling rubber not only prevents this problem but can produce new materials with desirable properties that virgin rubbers lack. This book presents an up-to-date overview of the fundamental and applied aspects of renewability and recyclability of rubber materials, emphasising existing recycling technologies with significant potential for future applications along with a detailed outline of new technology based processing of rubber to reuse and recycle. This book will be of interest to researchers in both academia and industry as well as postgraduate students working in polymer chemistry, materials processing, materials science and engineering.
Download or read book Rubber Recycling written by Sadhan K. De and published by CRC Press. This book was released on 2005-06-14 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe disposal and reuse of industrial and consumer rubber waste continues to pose a serious threat to environmental safety and health, despite the fact that the technology now exits for its effective recycling and reuse. Mountains of used tires confirm the belief that chemically crosslinked rubber is one of the most difficult materials to recyc
Download or read book Recycling and Reuse of Used Tyres written by Ravindra K. Dhir and published by Thomas Telford. This book was released on 2001 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantial quantities of used tyres are being discarded annually throughout the world and this is likely to increase in line with the growth in road traffic. Given the environmental economic implications of this waste, the many regulating bodies world-wide are actively promoting policies aimed at recycling and reuse of the material for recovery as a valuable resource. However, in many parts of the world, recycled tyre technology is still in its infancy.This book presents the proceedings of an International Symposium organised by the Concrete Technology Unit, University of Dundee which brings together some of the worlds leading experts in the field of used tyre recycling.
Download or read book Recycling and Re use of Waste Rubber written by Martin John Forrest and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The environmental and economic need to increase recycling rates is a principal driving force behind technological innovation in the 21 st century. Waste rubber products are an important resource that the global community is focusing on to achieve vital improvements in sustainability and meet important life cycle goals. . This comprehensive review, with extensive up-to-date referencing, covers all aspects of rubber recycling, from its world market to the many novel technologies and processes that have been developed to re-use the material to manufacture added-value products. . One objective of.
Download or read book Tire Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2021-03-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tire Waste and Recycling takes a methodical approach to the recycling of tires, providing a detailed understanding on how to manage, process, and turn waste tires into valuable materials and industrial applications. Sections cover fundamental aspects such as tire use, composition, trends, legislation, the current global situation, the possibilities for moving towards a circular economy, lifecycle options, treatment methods, and opportunities for re-use, recycling and recovery. Subsequent sections of the book focus on specific technologies that enable the utilization of waste tires in the development of high value materials and advanced applications. Finally, the future of tire recycling is considered. This is an essential resource for scientists, R&D professionals, engineers and manufacturers working in the tire, rubber, waste, recycling, automotive and aerospace industries. In academia, the book will be of interest to researchers and advanced scientists across rubber science, polymer science, materials engineering, environmental science, chemistry and chemical engineering. Offers systematic coverage of tire recycling, covering composition, lifecycle, processing options, material developments and latest technologies Explains end-of-life-options in detail, considering approaches and methods for reduction, re-use, recycling and recovery Explores key application and product areas for recycled tire materials, from civil engineering, sports and leisure, to roads and transport, construction, automotive, and many more
Download or read book Recycling and Reuse of Materials and Their Products written by Yves Grohens and published by CRC Press. This book was released on 2013-01-23 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book is an overall analysis of different innovative methods and ways of recycling in connection with various types of materials. It aims to provide a basic understanding about polymer recycling and its reuse as well as presents an in-depth look at various recycling methods. It provides a thorough knowledge about the work being done in recycling in different parts of the world and throws light on areas that need to be further explored. Emphasizing eco-friendly methods and recovery of useful materials The book covers a wide variety of innovative recycling methods and research, including • Green methods of recycling • Effective conversion of biomass and municipal wastes to energy-generating systems • A catalyst for the reuse of glycerol byproduct • Methods of adsorption to treat wastewater and make it suitable for irrigation and other purposes • Disposal of sludge • The use of calcined clay to replace both fine and coarse aggregates • Recycling of rubbers • The production of a sorbent material for paper mill sludge • Replacing polypropylene absorbent in oil spill sanitations • The use of natural fibers for various industrial applications • Cashew nut shell liquid as a source of surface active reagents • Integrated power and cooling systems based on biomass • Recycling water from household laundering • much more
Download or read book Scrap Tires written by Robert H Snyder and published by SAE International. This book was released on 1998-03-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scrap Tires: Disposal and Reuse details the historical, technological, and economic issues related to the scrap tire industry, and the manner in which the scrap tire problem is addressed. The ultimate solution will be hastened by progress in the establishment of profitable commercial enterprises and markets to utilize scrap tires for their inherent intrinsic value. Scrap Tires provides advice on how scrap tires can be used for fuels, sealants, rubber mats, playground surfaces, equestrian arenas, wastewater treatment plant composts, golf courses, and more. Written from a business perspective, Scrap Tires focuses on the economics of tire recycling, providing valuable advice to individuals or companies. In addition to an exploration of markets, the book describes how tires are chopped, the machinery used in chopping tires, the grinding process, and the engineering properties of tire chips.
Download or read book Rubber Reuse and Solid Waste Management written by United States. Environmental Protection Agency and published by . This book was released on 1971 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration. Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete. With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites Discusses the management of waste composites and EU legislation with regards to recycling Examines methods for recycling, including thermal technologies and mechanical methods
Download or read book Recycling of Rubber written by H. J. Manuel and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains a review of technologies used within the rubber recycling industry. The development practical application, advantages and disadvantages of the individual processes are detailed as well as the characteristics and performance of the end products. Applications of recycled rubbers, with and without other materials are discussed and future trends in rubber recycling are evaluated briefly. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book The Effect of Long Term Thermal Exposure on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2021-04-25 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Effect of Long Term Thermal Exposure on Plastics and Elastomers, Second Edition brings together a wide range of essential data on the effect of long-term thermal exposure on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. This second edition has been thoroughly revised to include the latest data and materials. This highly valuable handbook will support engineers, product designers, R&D professionals, and scientists who are working on plastics products or parts for high temperature environments across a range of industries. This readily available data will make it easy for practitioners to learn about plastic materials and their long- term thermal exposure without having to search the general literature or depend on suppliers. This book will also be of interest to researchers and advanced students in plastics engineering, polymer processing, coatings, and materials science and engineering. Provides essential data and practical guidance for engineers and scientists working with plastics in high temperature environments Includes introductory chapters on the effect of heat aging and testing methods, providing the underpinning knowledge required to utilize the data Covers a wide range of commercial polymer classes that are updated to include the latest developments in plastics materials
Download or read book Starch Based Polymeric Materials and Nanocomposites written by Jasim Ahmed and published by CRC Press. This book was released on 2012-04-04 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, much attention has been focused on biodegradable polymers from renewable resources. Due to its availability and low cost, starch is a promising candidate among biopolymers for use in biodegradable packaging materials and for other purposes. Starch-Based Polymeric Materials and Nanocomposites: Chemistry, Processing, and Applications
Download or read book Uses of Recycled Rubber Tires in Highways written by Jon A. Epps and published by Transportation Research Board. This book was released on 1994 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.
Download or read book Recycled Plastic Biocomposites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2022-01-24 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycled plastic biocomposites have attracted widespread attention from both researchers and manufacturers due to the significant improvements in their physico-mechanical, thermal, rheological, and barrier properties when compared to conventional materials, as well as their potential regarding commercialization and zero waste. Recycled Plastic Biocomposites presents the latest information on recycled polymers, textiles, pulp and paper, wood plastic, rubber waste plastic, and micro and nano effects of recycled plastic waste resources that have great potential as reinforcement materials in composites because they are non-toxic, inexpensive, biodegradable, cost-effective, and available in large amounts. Recycled plastic biocomposites are now starting to be deployed in a broad range of materials applications due to their advantages over petroleum-based materials. Currently, there are no limits to the possibility of their applications. They also have exceptional sustainable and biodegradable properties when compared to conventional materials such as polymers and composites. Recycled Plastic Biocomposites reviews the latest research advances on recycled plastic-based biocomposites, including thermoplastic, thermoset, rubber, and foams. In addition, the book covers critical assessments on the economics of recycled plastic, including a cost-performance analysis that discusses its strengths and weaknesses as a reinforcement material. The huge potential applications of recycled plastic in industry are also explored in detail with respect to low cost, recyclable and biodegradable properties, and the way they can be applied to the automotive, construction, and packaging industries. The life cycles of both single and hybrid recycled plastic-based polymer composites and biocomposites are also discussed in detail. From the viewpoint of recycled plastic-based polymer composites, the book covers not only the well-known role of recycled polymers and composites, but also advanced materials produced from micro-, nano-, and pico-scale fillers that achieve better physical, mechanical, morphological, and thermal properties. This book will be an essential reference resource for academic and industrial researchers, materials scientists, and those working in polymer science and engineering, chemical engineering, manufacturing, and biocomposites. Places an emphasis on micro-, nano-, and pico-scale fillers that significantly improve properties. Discusses the most suitable fabrication methods, properties, and applications. Features critical assessments on the economics of recycled plastic, including a cost-performance analysis that reviews its strengths and weaknesses as a reinforcement material.
Download or read book Recycling and Reuse of Waste Materials written by Ravindra K. Dhir and published by Thomas Telford Publishing. This book was released on 2003 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents part of the proceedings of two symposia held under the umbrella of Advances in Waste Management, an international meeting organised by the University of Dundees Concrete Technology Unit.
