Download or read book Recycled Polymer Blends and Composites written by Hanafi Ismail and published by Springer Nature. This book was released on 2023-10-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative account of the potential of recycled polymer blends and composites such as recycled rubber, Polypropylene, Poly(Vinylidene Fluoride) (PVDF), polyhydroxybutyrate-3-valerate (PHBV), Polyethylene, and similar compounds, in polymer recycling industries. It highlights the latest research on fundamentals of recycled polymer blends and composites such as physical, chemical, mechanical and thermal properties and morphological studies. The book also provides a comprehensive state of the art review of recycling of polymer blends and composites for sustainability. Polymeric substances recycled from excess sludge in wastewater treatment plants, reinsertion of Poly(Vinylidene Fluoride) (PVDF), polyolefin and Polypropylene post-Industrial waste by primary recycling, as well as the recent development of biomass and COVID-19 plastic waste derived char filled natural starch biocomposite briquettes are also covered.

Download or read book Recycling of Polymers written by Raju Francis and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polymers This timely reference on the topic is the only book you need for a complete overview of recyclable polymers. Following an introduction to various polymer structures and their resulting properties, the main part of the book deals with different methods of recycling. It discusses in detail the recycling of such common polymers as polyethylene, polypropylene and PET, as well as rubbers, fibers, engineering polymers, polymer blends and composites. The whole is rounded off with a look at future technologies and the toxicological impact of recycled polymers. An indispensable reference source for those working in the field, whether in academia or industry, and whether newcomers or advanced readers.

Download or read book Polymer Blends and Composites written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2017-04-11 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. An important contribution to the commercial polymer industry, Polymer Blends and Composites is one of the first books to combine plastics additives, testing, and quality control. The book is a comprehensive treatise on properties that provides detailed guidelines for selecting and using blends and composites for applications. A valuable resource for operators, processors, engineers, chemists, the book serves to stimulate those already active in natural polymer composites.

Download or read book Biodegradable Polymer Blends and Composites from Renewable Resources written by Long Yu and published by John Wiley & Sons. This book was released on 2009-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodegradable Polymer Blends and Composites from Renewable Resources provides a comprehensive, current overview of biopolymeric blends and composites and their applications in various industries. The book is organized according to the type of blend or composite. For each topic, the relationship between the structure of the blends/composites and their respective properties is explored, with particular focus on interface, compatibility, mechanical, and thermal properties. Real-life applications and potential markets are discussed. This is a premier reference for graduate students and researchers in polymer science, chemical and bio engineering, and materials science.

Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-28 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.

Download or read book Poly Ethylene Terephthalate Based Blends Composites and Nanocomposites written by P.M. Visakh and published by William Andrew. This book was released on 2015-08-24 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly(Ethylene Terephthalate) (PET) is an industrially important material which is not treated specifically in any other book. Poly(Ethylene Terephthalate) Based Blends, Composites and Nanocomposites fills this gap and systematically guides the reader through all aspects of PET and its blends, composites and nanocomposites. It covers theoretical fundamentals, nanocomposites preparation, modification techniques, structure-property relationships, characterisation of the different blends and composites, and material choice for specific applications. Consisting of contributions from experts in the field this book is a useful reference for the researchers and engineers working on the development and characterization of PET materials as well as on implementing them in real-world products. It can also be used as a standard reference for deeper insight in the mechanical, thermal, thermo-mechanical and visco-elastic aspects in product design decisions. Provides a systematic overview on all types of poly(ethylene) terephthalate (PET) based blends, composites and nanocomposites Informs about characterization, structure-property relationships and types of modifications Links material properties to specific applications, enabling engineers to make the best material choice to increase product performance and cost efficiency, in industries ranging from aerospace to energy

Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.

Download or read book Polymer Blends and Polymer Composites written by Lin Ye and published by CRC Press. This book was released on 1998 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years significant progress has been made in many areas of polymer blend and polymer matrix composite science and technology. This volume comprises a selection of refereed papers which cover the state-of-the-art, and predict future trends in polymer blend and composite research; including established, as well as innovative, applications and new directions for these novel materials. The contents are grouped into five sections: theoretical and experimental studies of manufacturing processes; structure-property relationships; damage mechanics and characterization; fracture and fatigue; and toughening and strengthening mechanisms. The articles present detailed results and new findings concerning these topics. Alltogether they present an authoritative view of recent research in the important fields of polymer blend and composite use. 1. Processing and Manufacturing. 2. Structure-Property Relationships. 3. Damage Mechanics and Characterization. 4. Fracture and Fatigue. 5. Toughening and Strengthening Mechanisms.

Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.

Download or read book Handbook of Polymer Blends and Composites written by and published by . This book was released on 2002 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.

Download or read book Recycled Plastic Biocomposites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2022-01-24 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycled plastic biocomposites have attracted widespread attention from both researchers and manufacturers due to the significant improvements in their physico-mechanical, thermal, rheological, and barrier properties when compared to conventional materials, as well as their potential regarding commercialization and zero waste. Recycled Plastic Biocomposites presents the latest information on recycled polymers, textiles, pulp and paper, wood plastic, rubber waste plastic, and micro and nano effects of recycled plastic waste resources that have great potential as reinforcement materials in composites because they are non-toxic, inexpensive, biodegradable, cost-effective, and available in large amounts. Recycled plastic biocomposites are now starting to be deployed in a broad range of materials applications due to their advantages over petroleum-based materials. Currently, there are no limits to the possibility of their applications. They also have exceptional sustainable and biodegradable properties when compared to conventional materials such as polymers and composites. Recycled Plastic Biocomposites reviews the latest research advances on recycled plastic-based biocomposites, including thermoplastic, thermoset, rubber, and foams. In addition, the book covers critical assessments on the economics of recycled plastic, including a cost-performance analysis that discusses its strengths and weaknesses as a reinforcement material. The huge potential applications of recycled plastic in industry are also explored in detail with respect to low cost, recyclable and biodegradable properties, and the way they can be applied to the automotive, construction, and packaging industries. The life cycles of both single and hybrid recycled plastic-based polymer composites and biocomposites are also discussed in detail. From the viewpoint of recycled plastic-based polymer composites, the book covers not only the well-known role of recycled polymers and composites, but also advanced materials produced from micro-, nano-, and pico-scale fillers that achieve better physical, mechanical, morphological, and thermal properties. This book will be an essential reference resource for academic and industrial researchers, materials scientists, and those working in polymer science and engineering, chemical engineering, manufacturing, and biocomposites. Places an emphasis on micro-, nano-, and pico-scale fillers that significantly improve properties. Discusses the most suitable fabrication methods, properties, and applications. Features critical assessments on the economics of recycled plastic, including a cost-performance analysis that reviews its strengths and weaknesses as a reinforcement material.

Download or read book Environmentally Friendly Polymers and Polymer Composites written by Rafael Balart and published by MDPI. This book was released on 2021-03-17 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous research advances have been observed in the field of environmentally-friendly polymers and polymer composites due to the dependence of polymers on fossil fuels and the sustainability issues related to plastic wastes. This book compiles the most recent research works in biopolymers, their blends and composites, and the use of natural additives, such as vegetable oils and other renewable and waste-derived liquids, with their marked environmental efficiency devoted to developing novel sustainable materials. Therefore, Environmentally Friendly Polymers and Polymer Composites provides an overview to scientists of the potential of these environmentally friendly materials and helps engineers to apply these new materials for industrial purposes.

Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Download or read book Micro and Nano Fibrillar Composites MFCs and NFCs from Polymer Blends written by Sabu Thomas and published by Woodhead Publishing. This book was released on 2017-06-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends is a comprehensive reference for researchers, students and scientists working in the field of plastics recycling and composites. The book aims to determine the influence of micro and nanofibrillar morphology on the properties of immiscible blend systems. Chapters cover micro and nanofibrillar composites based on polyolefin, liquid crystal polymer, biodegradable polymers, polyester and polyamide blends in various industrial application fields. The book brings together panels of highly-accomplished experts in the field of plastics recycling, blends and composites systems. For several decades, plastic technology has played an important role in many industrial applications, such as packaging, automobiles, aerospace and construction. However the increasing use of plastics creates a lot of waste. This has led to restrictions on the use of some plastics for certain applications and a drive towards recycling of plastics. More recently, microfibrillar in-situ composites have been prepared from waste plastics such as PET/PP, PET/PE and Nylon/PP as a way of formulating new high performance polymer systems. This book tackles these issues and more, and is an ideal resource for anyone interested in polymer blends. Provides information on MFC and NFC based polymer blends that have been accumulated over the last 25 years, providing a useful reference Adopts a novel approach in terms of understanding the relationship between processing, morphology, structure, properties and applications in micro and nanofibrillar composites Contains contributions from leading experts in the field from both industrial and academic research

Download or read book Frontiers in the Science and Technology of Polymer Recycling written by Güneri Akovali and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers, main components of plastics and rubbers, are being discarded in increasing quantities. But this waste can also be considered as `plastic gold'. Public concern, coupled with the inherent value of the material, means that recycling is imperative. The present book presents a survey of current knowledge in the form of case studies, including current legal and educational issues. Topics covered also include regulation and practice in NATO countries, the economics of recycling, the reprocessing of single polymers and mixtures, and future prospects and strategies. Audience: Vital reading for all polymer scientists, technicians and engineers.

Download or read book Polymer Blends written by L.A. Utracki and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report begins by summarising the basis of polymer blending. This includes an outline of the techniques being used to characterise blends including spectroscopic techniques and rheometry. The types of polymer blends which have been studied are outlined. Methods of compatibilisation are discussed. The morphology of the phases in a blend is critical to property development - the types of morphology observed are described. Flow-induced morphology is described. Processing of blends and the effects on morphology are discussed including extrusion, thermoforming, blow moulding, injection moulding and foaming. The accompanying abstracts from the Rapra Polymer Library database provide useful further information and indicate sources of additional material.