Download or read book Recyclability and Embodied Energy of Advanced Polymer Matrix Composites written by Jody Emlyn Muelaner and published by SAE International. This book was released on 2023-08-15 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of advanced composites made from carbon fibers in epoxy resins is essential for two primary reasons. First, the energy necessary to produce carbon fibers is very high and therefore reusing these fibers could greatly reduce the lifecycle energy of components which use them. Second, if the material is allowed to break down in the environment, it will contribute to the growing presence of microplastics and other synthetic pollutants. Recyclability and Embodied Energy of Advanced Polymer Matrix Composites discusses current recycling and disposal methods—which typically do not aim for full circularity, but rather successive downcycling—and addresses the major challenge of aligning fibers into unidirectional tows of real value in high-performance composites. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2023018

Download or read book Introduction of Continuous Fiber reinforced Polymer written by Michael Hayes and published by SAE International. This book was released on 2023-08-15 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: To grow the application space of polymer additive manufacturing (AM), the industry must provide an offering with improved mechanical properties. Several entities are working towards introducing continuous fibers embedded into either a thermoplastic or thermoset resin system. This approach can enable significant improvement in mechanical properties and could be what is needed to open new and exciting applications within the aerospace industry. Introduction of Continuous Fiber Reinforced Polymer: A New Additive Manufacturing Path for Aerospace examines a couple of unsettled issues that are beginning to come to light regarding these materials and focuses on the ability to design and provide robust structural analysis for continuous fiber reinforced polymer AM—unsung aspects that can make or break this new technology as it finds its way into the aerospace market. Without solutions to them, adoption by the aerospace industry will be limited to point design applications, thus constraining the technology to being nothing more than a specialized tool. Click here to access The Mobility Frontier: Metals, Polymers, or Composites Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2023019

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Generative Design in Aerospace and Automotive Structures written by Jody Emlyn Muelaner and published by SAE International. This book was released on 2024-07-23 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-automated computational design methods involving physics-based simulation, optimization, machine learning, and generative artificial intelligence (AI) already allow greatly enhanced performance alongside reduced cost in both design and manufacturing. As we progress, developments in user interfaces, AI integration, and automation of workflows will increasingly reduce the human inputs required to achieve this. With this, engineering teams must change their mindset from designing products to specifying requirements, focusing their efforts on testing and analysis to provide accurate specifications. Generative Design in Aerospace and Automotive Structures discusses generative design in its broadest sense, including the challenges and recommendations regarding multi-stage optimizations. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2024016

Download or read book Marine Applications of Advanced Fibre reinforced Composites written by Jasper Graham-Jones and published by Woodhead Publishing. This book was released on 2015-09-28 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The marine environment presents significant challenges for materials due to the potential for corrosion by salt water, extreme pressures when deeply submerged and high stresses arising from variable weather. Well-designed fibre-reinforced composites can perform effectively in the marine environment and are lightweight alternatives to metal components and more durable than wood. Marine Applications of Advanced Fibre-Reinforced Composites examines the technology, application and environmental considerations in choosing a fibre-reinforced composite system for use in marine structures. This book is divided into two parts. The chapters in Part One explore the manufacture, mechanical behavior and structural performance of marine composites, and also look at the testing of these composites and end of life environmental considerations. The chapters in Part Two then investigate the applications of marine composites, specifically for renewable energy devices, offshore oil and gas applications, rigging and sails. Underwater repair of marine composites is also reviewed. - Comprehensively examines all aspects of fibre-reinforced marine composites, including the latest advances in design, manufacturing methods and performance - Assesses the environmental impacts of using fibre-reinforced composites in marine environments, including end of life considerations - Reviews advanced fibre-reinforced composites for renewable energy devices, rigging, sail textiles, sail shape optimisation and offshore oil and gas applications

Download or read book Municipal Solid Waste Management written by Christian Ludwig and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivation The other day I was waiting at the station for my train. Next to me a young lady was nonchalantly leaning against the wall. Suddenly, she took a cigarette pack out of her handbag, pulled out the last cigarette, put it between her lips, crushed the empty pack, threw it on the ground and hedonistically lit the cigarette. I thought to myself, "What a behavior?!". The nearest trashcan was just five meters away. So I bent down, took the crushed pack and gave it back to her, saying that she had lost it. She looked at me in a rather deranged way, but she said nothing and of waste to the trashcan. brought the piece Often people are not aware of the waste they produce. They get rid of it and that's it. As soon as the charming lady dropped the cigarette pack, the problem was solved for her. The pack was on the ground and it suddenly no longer belonged to her. It is taken for granted that somebody else will do the cleaning up. There is a saying that nature does not produce waste. For long as humans obtained the goods they needed from the ground where they lived, the waste that was produced could be handled by nature. This has drastically changed due to urbanization and waste produced by human activities has become a severe burden.

Download or read book Advanced Composites Manufacturing written by Timothy G. Gutowski and published by Wiley-Interscience. This book was released on 1997-08-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art look at advanced composites processing and manufacturing-from leading academic and industry experts Advanced Composites Manufacturing combines cutting-edge coverage of the scientific fundamentals of composites processing with an in-depth treatment of the major manufacturing processes for advanced composite materials. Complete with important information on such key issues as new processing areas, manufacturing process control, deformation forming, and cost-control strategies, this unique reference is essential reading for materials scientists, researchers, and engineers across a range of industry sectors. Topics covered include: * The Processing Science of Reactive Polymer Composites. * The Processing Science of Thermoplastic Composites. * The Elastic Deformation of Fiber Bundles. * Processing of Textile Preforms. * The Autoclave Processing of Composites. * Pultrusion of Composites. * Forming of Advanced Composites. * Filament Winding Process Model for Thermosetting Matrix Composites. * Liquid Composite Molding. * Process Control of Thermosetting Composites. * Joining of Composites. * Cost, Automation, and Design .

Download or read book Lightweight and Sustainable Materials for Automotive Applications written by Omar Faruk and published by CRC Press. This book was released on 2017-06-01 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive manufacturers are required to decrease CO2 emissions and increase fuel economy while assuring driver comfort and safety. In recent years, there has been rapid development in the application of lightweight and sustainable materials in the automotive industry to help meet these criteria. This book provides critical reviews and the latest research results of various lightweight and sustainable materials in automotive applications. It discusses current applications and future trends of lightweight materials in the automotive area. While there are a few books published mainly focusing on automotive applications of metallic lightweight materials, to date there is no available book focusing on a broad spectrum of lightweight materials, including metal, plastic, composites, bio-fiber, bio-polymer, carbon fiber, glass fiber, nanomaterials, rubber materials, and foaming materials, as this work does. The book also includes case studies of commercial lightweight automotive parts from sustainable lightweight materials, providing an invaluable resource to those involved in this in-demand research and commercialization area.

Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.

Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.

Download or read book Green Biocomposites written by Mohammad Jawaid and published by Springer. This book was released on 2017-02-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept, design and application of green biocomposites, with a specific focus on the current demand for green biocomposites for automotive and aerospace components. It discusses the mathematical background, innovative approaches to physical modelling, analysis and design techniques. Including numerous illustrations, tables, case studies and exercises, the text summarises current research in the field. It is a valuable reference resource for researchers, students and scientists working in the field of materials science.

Download or read book ICT Innovations for Sustainability written by Lorenz M. Hilty and published by Springer. This book was released on 2014-08-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICT Innovations for Sustainability is an investigation of how information and communication technology can contribute to sustainable development. It presents clear definitions of sustainability, suggesting conceptual frameworks for the positive and negative effects of ICT on sustainable development. It reviews methods of assessing the direct and indirect impact of ICT systems on energy and materials demand, and examines the results of such assessments. In addition, it investigates ICT-based approaches to supporting sustainable patterns of production and consumption, analyzing them at various levels of abstraction – from end-user devices, Internet infrastructure, user behavior, and social practices to macro-economic indicators. Combining approaches from Computer Science, Information Systems, Human-Computer Interaction, Economics, and Environmental Sciences, the book presents a new, holistic perspective on ICT for Sustainability (ICT4S). It is an indispensable resource for anyone working in the area of ICT for Energy Efficiency, Life Cycle Assessment of ICT, Green IT, Green Information Systems, Environmental Informatics, Energy Informatics, Sustainable HCI, or Computational Sustainability.

Download or read book Material Strategies written by Blaine Brownell and published by Princeton Architectural Press. This book was released on 2013-07-02 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blaine Brownell s best-selling Transmaterial series has introduced designers to hundreds of emergent materials that have the potential to transform our built environment. In our new Architecture Brief, Material Strategies, Brownell shows architects how creative applications of these materials achieve such transformations. Chapters based on fundamental material categories examine historical precedents, current opportunities, and future environmental challenges. Case studies featuring detailed illustrations showcase pioneering buildings from today s most forward-thinking architectural firms.

Download or read book Marine Composites written by Richard Pemberton and published by Woodhead Publishing. This book was released on 2018-08-20 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Composites: Design and Performance presents up-to-date information and recent research findings on the application and use of advanced fibre-reinforced composites in the marine environment. Following the success of their previously published title: Marine Applications of Advanced Fibre-reinforced Composites which was published in 2015; this exemplary new book provides comprehensive information on materials selection, characterization, and performance. There are also dedicated sections on sandwich structures, manufacture, advanced concepts, naval architecture and design considerations, and various applications. The book will be an essential reference resource for designers, materials engineers, manufactures, marine scientists, mechanical engineers, civil engineers, coastal engineers, boat manufacturers, offshore platform and marine renewable design engineers. - Presents a unique, high-level reference on composite materials and their application and use in marine structures - Provides comprehensive coverage on all aspects of marine composites, including the latest advances in damage modelling and assessment of performance - Contains contributions from leading experts in the field, from both industry and academia - Covers a broad range of naval, offshore and marine structures

Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.

Download or read book Natural Fibres and their Composites written by Vincenzo Fiore and published by MDPI. This book was released on 2021-04-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decades, natural fibers have received growing attention as alternatives to synthetic materials for the reinforcement of polymeric composites. Their specific properties, low price, health advantages, renewability and recyclability make natural fibers particularly attractive for these purposes. Furthermore, natural fibers have a CO2-neutral life cycle, in contrast to their synthetic counterparts. However, natural fibers are also widely known to possess several drawbacks, such as a hydrophilic nature, low and variable mechanical properties, poor adhesion to polymeric matrices, high susceptibility to moisture absorption and low aging resistance. Therefore, extensive research has been conducted on natural fiber-reinforced composites in the last 20 years. In this context, this book presents several interesting papers concerning the use of natural fibers for the reinforcement of polymer-based composites, with a focus on the evaluation of their mechanical performances, ballistic properties, rheological behavior, thermal insulation response and aging resistance in humid or aggressive environments.