Download or read book Recovery and Recrystallization in FCC Metals After High Temperature Deformation written by Ružica Aleksandra Petković-Luton and published by . This book was released on 1975 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recovery and Recrystallization in FCC Metals After High Temperature Deformation written by Ruzica Aleksandra Petkovic-Luton and published by 1975 [c1976]. This book was released on 1975 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Recrystallization grain growth and textures written by and published by Taylor & Francis. This book was released on 1966 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Deformation Processing written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has con ducted the Sagamore Army Materials Research Conference in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University since 1954. The purpose of the conference has been to gather to gether scientists and engineers from academic institutions, in dustry and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. This volume, Advances in Deformation Processing, addresses the areas of Analytical Advances, Workability, Processing to Optimize Properties, Advanced Applications - Materials, and Advanced Applications - Processes. The dedicated assistance of Mr. Joseph Bernier of the Army Materials and Mechanics Research Center throughout the stages of the conference planning and finally the publication of the Sagamore Conference Proceedings is deeply appreciated. The support of Helen Brown DeMascio of Syracuse University in p- paring the final manuscript is acknowledged. The continued active interest and support of these conferences by Dr. A. E. Gorum, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii Contents SESSION I INTRODUCTION A. E. Gorum, Moderator Continuum Mechanics and Deformation Processing 1.
Download or read book Ni free Ti based Shape Memory Alloys written by Hee Young Kim and published by Butterworth-Heinemann. This book was released on 2018-09-17 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ni-free Ti-based Shape Memory Alloys reviews the fundamental issues of biomedical beta-type Ti base shape memory and superelastic alloys, including martensitic transformation, shape memory and superelastic properties, alloy development, thermomechanical treatment and microstructure control, and biocompatibility. Some unique properties, such as large nonlinear elastic behavior and low Young's modulus, observed in metastable Ti alloys are discussed on the basis of phase stability. As it is expected that superelastic Ti alloys will further expand the applications of shape memory alloys within the biomedical field, this book provides a comprehensive review of these new findings in Ti-base shape memory and superelastic alloys. - Includes coverage of phase transformations in titanium alloys - Discusses mechanical properties and alloy development - Presents a review of Ti-based shape alloys and their applications
Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 2 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2024-04-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.530 pages Provides an overview of the material preparation and synthesis strategies of metal oxide composite and metal oxide hybrid materials for use in gas and humidity sensors Reviews emerging advanced metal oxide materials such as perovskites, spinel ferrites, and quaternary materials for gas and VOC sensors Discusses the potential opportunities and challenges to be circumvented in the use of metal oxide materials to enable new sensor technologies
Download or read book Modelling Hot Deformation of Steels written by John G. Lenard and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Engineering may be defined as an approach to solving tech nological problems in which most or all of the steps involved are automated through the use of computers, data bases and mathematical models. The success of this ap proach, considering hot forming, is tied very directly to an understanding of material behaviour when subjected to deformation at high temperatures. There is general agreement among engineers that not enough is known about that topic -and this gave the initial impetus for the project described in the present study. The authors secured a research grant from NATO (Special Research Grant #390/83) with a mandate to study the "State-of-the-Art of Controlled Rolling". What follows is the result of that study. There are five chapters in this Monograph. The first one, entitled "State-of-the Art of Controlled Rolling" discusses industrial and laboratory practices and research designed to aid in the development of microalloyed steels of superior quality. Follow ing this is the chapter "Methods of Determining Stress-Strain Curves at Elevated Temperatures". The central concern here is the material's resistance to deformation or in other words, its flow strength, the knowledge of which is absolutely essential for the efficient and economical utilization of the computers controlling the rolling process.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Bibliography on the High Temperature Chemistry and Physics of Materials written by and published by . This book was released on 1976 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Developments in the Study of Recrystallization written by Peter Wilson and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization is a phenomenon moderately well documented in the geological and metallurgical literature. This book provides a timely overview of the latest research and methods in a variety of fields where recrystallization is studied and is an important factor. The main advantage of a new look at these fields is the rapid increase in modern techniques, such as TEM, spectrometers and modeling capabilities, all of which are providing us with far better images and analysis than ever previously possible. This book will be invaluable to a wide range of research scientists; metallurgists looking to improve properties of alloys, those interested in how the latest equipment may be used to image grains and to all those who work with frozen aqueous solutions where recrystallization may be a problem.
Download or read book Static Recovery and Recrystallization of Hot Deformed FCC Materials written by Ohjoon Kwon and published by . This book was released on 1985 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization in Metals and Alloys written by S. S. Gorelik and published by . This book was released on 1981 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operations and Basic Processes in Steelmaking written by Luis Felipe Verdeja González and published by Springer Nature. This book was released on 2021-03-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the operations and industrial processes related to the production of steel. The chapters cover the second part of the iron and steelmaking process, called steelmaking, presenting the stages of the process until obtaining the finished steel product in different formats for distinct applications. This book reports significant operating variables of the processes and basic operations of the steelmaking. The chapters contain numerous solved exercises conceptually supported on the thermodynamic and kinetic fundamentals of the production of steel from the pig iron in the Basic Oxygen Furnace (BOF) and the production of steel and ferroalloys in Electric Arc Furnaces (EAF). The thermal and mechanic fundamentals of the hot rolling operations and the mechanical fundamentals of the cold rolling, forming, and wire drawing to obtain different steel products are also reported. The book summarizes the strengths and uncertainties of steel as a structural material.
Download or read book Modelling Hot Deformation of Steels written by John G. Lenard and published by Berlin ; New York : Springer-Verlag. This book was released on 1989 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Engineering may be defined as an approach to solving tech nological problems in which most or all of the steps involved are automated through the use of computers, data bases and mathematical models. The success of this ap proach, considering hot forming, is tied very directly to an understanding of material behaviour when subjected to deformation at high temperatures. There is general agreement among engineers that not enough is known about that topic -and this gave the initial impetus for the project described in the present study. The authors secured a research grant from NATO (Special Research Grant #390/83) with a mandate to study the "State-of-the-Art of Controlled Rolling". What follows is the result of that study. There are five chapters in this Monograph. The first one, entitled "State-of-the Art of Controlled Rolling" discusses industrial and laboratory practices and research designed to aid in the development of microalloyed steels of superior quality. Follow ing this is the chapter "Methods of Determining Stress-Strain Curves at Elevated Temperatures". The central concern here is the material's resistance to deformation or in other words, its flow strength, the knowledge of which is absolutely essential for the efficient and economical utilization of the computers controlling the rolling process.
Download or read book Extrusion written by and published by ASM International. This book was released on 2006 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History Effects in Polycrystalline FCC Metals Subjected to Rapid Changes in Strain Rate and Temperature written by J. Klepaczko and published by . This book was released on 1974 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review is presented of available experimental data on strain rate and temperature history effects for fcc polycrystalline metals together with new experimental results on copper and lead. It is evident from all the data presented that history effects play an important role which cannot be neglected in deriving constitutive relations to describe the plastic behavior of metals. It is shown in this paper that the influence of strain or temperature on the flow stress can be divided into two parts. The initial part is due to the existing work-hardened structure at that strain level, while the second is associated with the formation history of that structure. A possible explanation for these effects lies in dynamic recovery processes which take place during the slower deformation before the imposition of the rapid change in strain rate or temperature.
