Download or read book Reconfigurable Manufacturing Enterprises for Industry 4 0 written by Ibrahim H. Garbie and published by CRC Press. This book was released on 2021-08-26 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to support readers facing the urgency, challenges, analysis, and methodologies to reconfiguration. It presents a comprehensive framework for reconfiguring manufacturing enterprises and provides a set of valuable conceptual frameworks and methodologies for analyzing, evaluating, and assessing reconfiguration indices. This book offers practical guidance for implementing the Fourth Industrial Revolution (Industry 4.0). It presents open-ended problems pertaining to the concepts covered in the book and provides a new approach for reconfiguring industrial systems. Not only is this book for industrialists and academics, it will also appeal to undergraduate and graduate students studying industrial, mechanical, and manufacturing engineering. Scholars and practitioners in operations management will also find this book of interest.

Download or read book Reconfigurable Manufacturing Systems From Design to Implementation written by Lyes Benyoucef and published by Springer Nature. This book was released on 2019-10-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops innovative techniques from operational research and management science for the design and implementation of a reconfigurable manufacturing system (RMS), and subsequently analyzes and assesses their performance. A reconfigurable manufacturing system (RMS) is a paradigm that can address many of the challenges posed by the modern market. Accordingly, substantial research is now being conducted on RMS, focusing on various levels of decision-making (strategic, tactical and operational). However, as a relatively new research area, there are still only very few books and articles available on reconfigurable manufacturing system design and management. In addition to filling that gap, this book provides a forum for investigating, exchanging ideas on, and disseminating the latest advances in the broad area of RMS applications in today’s industry. Gathering contributions by experts from academia, industry and policy-making, it represents an essential contribution to the existing literature on manufacturing and logistics in general and industry 4.0 in particular.

Download or read book Integrated Reconfigurable Manufacturing Systems and Smart Value Chain written by M. Reza Abdi and published by Springer. This book was released on 2018-05-30 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book develops manufacturing concepts and applications beyond physical production and towards a wider manufacturing value chain incorporating external stakeholders that include suppliers of raw materials and parts, customers, collaborating manufacturing companies, manufacturing service providers, and environmental organisations. The focal point of the value chain remains as a manufacturing system and its operations whiles flows of parts/materials and information and services across the supply/value chain tiers are taken into account. The book emphasises on the two innovative paradigms of Reconfigurable Manufacturing Systems (RMS) and the 4th industrial revolution (Industry 4.0) along with their incorporated development. RMS, as a relatively new paradigm, has been introduced to meet the requirements of ‘the factories of the future’, which is aimed by Industry 4.0, though introducing greater responsiveness and customised flexibility into production systems, in which changes in product volumes and types occur regularly. Manufacturing responsiveness can be achieved by RMS through reconfiguring the production facilities according to changing demands of products and new market conditions. The book addresses challenges of mass-customisation and dynamic changes in the supply-chain environment by focusing on developing new techniques related to integrability, scalability and re-configurability at a system level and manufacturing readiness in terms of financial and technical feasibility of RMS. It demonstrate the expected impacts of an RMS design on operational performance and its supply/value chain in the current/future manufacturing environment facing dynamic changes in the internal/external circumstances. In order to establish a circular economy through the RMS value chain, an integrated data-based reconfiguration link is introduced to incorporate information sharing amongst the value chain stakeholders and facilitate grouping products into families with allocation of the product families to the corresponding system configurations with optimal product-process allocation. Decision support systems such as multi criteria decision making tools are developed and applied for the selection of product families and optimising product-process configuration. The proposed models are illustrated through real case studies in applicable manufacturing firms.

Download or read book Reconfigurable Manufacturing Systems written by Lyes Benyoucef and published by . This book was released on 2020 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops innovative techniques from operational research and management science for the design and implementation of a reconfigurable manufacturing system (RMS), and subsequently analyzes and assesses their performance. A reconfigurable manufacturing system (RMS) is a paradigm that can address many of the challenges posed by the modern market. Accordingly, substantial research is now being conducted on RMS, focusing on various levels of decision-making (strategic, tactical and operational). However, as a relatively new research area, there are still only very few books and articles available on reconfigurable manufacturing system design and management. In addition to filling that gap, this book provides a forum for investigating, exchanging ideas on, and disseminating the latest advances in the broad area of RMS applications in todays industry. Gathering contributions by experts from academia, industry and policy-making, it represents an essential contribution to the existing literature on manufacturing and logistics in general and industry 4.0 in particular.

Download or read book Reconfigurable Manufacturing Systems and Transformable Factories written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear reader! In your hand you have the second book from the series “XXI Century Techno- gies. ” The first book under the title “Manufacturing Technologies for Machines of the Future” was published by “Springer” in 2003. This book is aimed at solving one of the basic problems in the development of modern machine-building – working out of technologies and manufacturing equipment which would promote the continuous development and improvement of the final product design, rapidly “adaptable” to the requirements of the market as for the quantity, quality, and variety of products manufactured with the lowest cost and minimum time and labor of the product process. In this book the problems of theory and practice of development in the reconfigurable manufacturing systems and transformable factories for various machine-building branches with a focus on automotive industry are discussed. The problems concerning the development of a new class of production systems which in comparison to the flexible manufact- ing systems are composed of a far less quantity of machine-tools (reduced cost of production) are discussed. In comparison to the conventional automated lines (dedicated systems) they make it possible to rapidly transform the equipment for new products manufacturing. The book has some advantages concerning the art of scientific ideas and the presentation of developments.

Download or read book The Global Manufacturing Revolution written by Yoram Koren and published by John Wiley & Sons. This book was released on 2010-11-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concrete tools manufacturing enterprises need to thrive in today's global environment For a manufacturing enterprise to succeed in this current volatile economic environment, a revolution is needed in restructuring its three main components: product design, manufacturing, and business model. The Global Manufacturing Revolution is the first book to focus on these issues. Based on the author's long-standing course work at the University of Michigan, this unique volume proposes new technologies and new business strategies that can increase an enterprise's speed of responsiveness to volatile markets, as well as enhance the integration of its own engineering and business. Introduced here are innovations to the entire manufacturing culture: An original approach to the analysis of manufacturing paradigms Suggested methods for developing creativity in product design A quantitative analysis of manufacturing system configurations A new manufacturing "reconfigurable" paradigm, in which the speed of responsiveness is the prime business goal An original approach to using information technology for workforce empowerment The book also offers analysis and original models of previous manufacturing paradigms' technical and business dimensions—including mass production and mass customization—in order to fully explain the current revolution in global manufacturing enterprises. In addition, 200 original illustrations and pictures help to clarify the topics. Globalization is creating both opportunities and challenges for companies that manufacture durable goods. The tools, theories, and case studies in this volume will be invaluable to engineers pursuing leadership careers in the manufacturing industry, as well as to leaders of global enterprises and business students who are motivated to lead manufacturing enterprises and ensure their growth.

Download or read book Advances in Mathematics for Industry 4 0 written by Mangey Ram and published by Academic Press. This book was released on 2020-10-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Mathematics for Industry 4.0 examines key tools, techniques, strategies, and methods in engineering applications. By covering the latest knowledge in technology for engineering design and manufacture, chapters provide systematic and comprehensive coverage of key drivers in rapid economic development. Written by leading industry experts, chapter authors explore managing big data in processing information and helping in decision-making, including mathematical and optimization techniques for dealing with large amounts of data in short periods. Focuses on recent research in mathematics applications for Industry 4.0 Provides insights on international and transnational scales Identifies mathematics knowledge gaps for Industry 4.0 Describes fruitful areas for further research in industrial mathematics, including forthcoming international studies and research

Download or read book Industry 4 0 for SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2020-01-03 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.

Download or read book Industry 4 0 and Advanced Manufacturing written by Amaresh Chakrabarti and published by Springer Nature. This book was released on 2020-10-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 1st International Conference on Industry 4.0 and Advanced Manufacturing held at the Indian Institute of Science, Bangalore and includes deliberations from stakeholders in manufacturing and Industry 4.0 on the nature, needs, challenges, opportunities, problems, and solutions in these transformational areas. Special emphasis is placed on exploring avenues for creating a vision of, and enablers for, sustainable, affordable, and human-centric Industry 4.0. The book showcases cutting edge practice, research, and educational innovation in this crucial and rapidly evolving area. This book will be useful to researchers in academia and industry, and will also be useful to policymakers involved in creating ecosystems for implementation of Industry 4.0.

Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.

Download or read book Industry 4 0 written by Lucia Knapčikova and published by Springer. This book was released on 2019-06-04 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Management of Manufacturing Systems in Industry 4 0 written by Lucia Knapcikova and published by Springer Nature. This book was released on 2022-02-01 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive exchange of information on current developments in the field of sustainable management of manufacturing systems and Industry 4.0. The authors’ ambition is to establish channels of communication and disseminate knowledge among professionals working in smart manufacturing and related institutions. The book brings together world-leading academics and practitioners from the fields of engineering, infrastructure planning, manufacturing management, and economics. The unique combination of fields and disciplines focused on Industry 4.0 provides presents opportunities to create a bridge between science and practice.

Download or read book Sustainability in Manufacturing Enterprises written by Ibrahim Garbie and published by Springer. This book was released on 2016-02-24 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores sustainability within manufacturing enterprises and examines the concepts and principles of this field. It also reviews the quantitative and qualitative tools available for analytic assessment. It presents a new framework for sustainable manufacturing requirements and discusses the implementation of sustainable manufacturing in terms of practices, indicators, and sustainability level assessments. The book also details the important conditions necessary for the conversion of existing traditional plants to ones with more sustainable processes. Chapters explore topics including the assessment of economic sustainability, social sustainability, environmental sustainability, sustainable manufacturing practices, and sustainability optimization. Serving as a reference for engineers, managers, and practitioners involved in manufacturing, this book will also be a valuable resource to students and researchers of industrial engineering, manufacturing engineering, systems engineering, and operations management.

Download or read book Forecasting Next Generation Manufacturing written by Frank T. Piller and published by Springer. This book was released on 2023-08-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing companies have just begun to implement the concepts of the Fourth Industrial Revolution (Industry 4.0) on a larger scale. Still, this area is characterized by a rapid pace of technological change, blurring boundaries between physical, digital, and biological systems, and a quickly changing growing political, economic, and social environment -- leading to high uncertainty in decision making and many questions about the future development in this field. To provide guidance and inspiration for managers and academics on the future of digital manufacturing systems, this book presents the results of an extensive Delphi study on next-generation manufacturing systems, with a projection period of up to 2030. We analyzed almost 2000 quantitative estimations and more than 600 qualitative arguments from a large panel of industrial and academic experts from Europe, North America, and Asia. The book describes each of the 24 projections in detail, offering current case study examples and related research, as well as implications for policymakers, firms, and individuals. The empirical results also allowed us to build scenarios for the most probable future along the dimensions of governance, organization, capabilities, and interfaces from both a company-internal and an external (network) perspective.

Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-11-09 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Mass Production Processes written by Anil Akdogan and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda ElMaraghy and published by Springer. This book was released on 2008-12-09 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.