Download or read book Recommendations for acceptance and applications of post tensioning systems written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1981-03-01 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recommendations for the acceptance of post tensioning systems written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1993-06-01 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Acceptance of post tensioning systems for cryogenic applications written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2021-04-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the Second World War the demand of energy has undergone an exponential growth that has led to a sharp annual increase in the use of natural gas in both, cities and thermal power stations. Nowadays, the strategic relevance of natural gas as a main source of energy is evident with a contribution of more than 20% of the total world consumption. This development in increasing demand of natural gas has led for a need of suitable storage and transportation infrastructure. Various gases, especially hydrocarbons, are preferably stored in liquid form for transportation and storage since the phase transformation from gas to liquid comes with a significant reduction of the volume (e.g. up to 600 times). Gases can be liquefied by raising the pressure or by cooling to their boiling point, which for most gases is below 0°C. This is known as cryogenic storage. The term cryogenic is derived from two Greek words, namely kryos meaning icy-cold and genes which can be translated as shape. These fib recommendations are concerned about post-tensioning systems used in cryogenic tanks and have been formulated on the basis of actual available knowledge with the aim to reflect the current state of the art. Consequently, these recommendations have included a classification of the different cryogenic tanks typologies used in the past and nowadays, the associated different tendon types depending on their exposure to low temperature (e.g. never, only accidentally or during normal tank operation) and the testing regime required for acceptance of the materials and the post-tensioning system according to this document. An international working group comprising more than 20 experts from administrative authorities, universities, laboratories, owners, structural designers, suppliers of prestressing steels and post-tensioning systems suppliers have actively contributed in order to develop these recommendations. This text has been written to cover best construction practices around the world, and to provide material specifications which are considered to be the most advanced available at the time of preparing this text. For ease of use (for Owner, Designer and Post-tensioning System Supplier), the content has been arranged systematically according to the system components into chapters focusing on performance characteristics, requirements and acceptance criteria.

Download or read book Acceptance Standards for Post Tensioning Systems written by Post-Tensioning Institute and published by . This book was released on 1998 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards and performance requirements for prestressing materials, bearing plates, wedge plates, connections and sheathing are discussed in detail. Qualification tests and acceptance criteria are presented for each of the individual components as well as for the complete system. A system approval summary outlines the test requirements and number of successful tests necessary for approval of a post-tensioning system.

Download or read book Post Tensioned Concrete Principles and Practice Third Edition written by K. Dirk Bondy and published by Lulu.com. This book was released on 2017-08-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book combines history with academic notes for use at the university level, presenting design examples from actual jobs with applications and detailing for the practicing engineer. Chapter 1 tells the history of post-tensioned concrete as only Ken Bondy can tell it. Chapters 2-8 are the notes Dirk Bondy uses to teach Design of Prestressed Concrete Structures at UCLA and Cal Poly-San Luis Obispo. Chapters 9-13 are design examples that address many of the decisions faced by practicing engineers on typical projects. Chapters 13-14 cover the art of detailing and observing the construction of post-tensioned concrete. This knowledge was obtained over many years of working on our own projects and listening and learning from the the pioneers of post-tensioned concrete. Chapter 15 covers the slab on grade industry, which represents more sales of post-tensioning tendons than all other post-tensioning applications combined. Chapter 16 discusses the challenging application of post-tensioning-external post-tensioning.

Download or read book Post tensioning in Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2005-01-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of prestressing technology has constituted one of the more important improvements in the fields of structural engineering and construction. Referring particularly to post-tensioning applications, it is generally recognized how it opens the possibility to improve economy, structural behaviour and aesthetic aspects in concrete solutions. In spite of the simplicity of its basic concepts and well-known advantages, the application extent of post-tensioning solutions cannot be considered harmonized in the different areas and structural applications. In fact, for various reasons, it appears that the potential offered by prestressing is far from being fully exploited, especially in building structures field. In many cases where post-tensioning would provide a visibly superior solution, it happens after all that a more conventional non-prestressed solution is often selected. The main objective of this fib Technical Report is therefore to show the benefits of using post-tensioning for the more common practical applications in concrete buildings. The document is mainly addressed to architects, contractors and owners. It is also drafted with the goal of motivating building designers to use post-tensioning: basic design aspects related to prestressing effects and design criteria are summarized and conceptual design aspects are emphasized. A set of practical examples is presented, showing the adopted solutions and their advantages when meeting the requirements of specific problems. The selected examples were precisely not chosen because they are outstanding structures. As a matter of fact, post-tensioning principles and technology can be used in any structure, independently of its importance, covering a wide range of building structural applications, improving the structure quality and promoting concrete as a structural material. The advantages of using post-tensioning, concerning structural behaviour, economy, detailing and constructive aspects, are illustrated by the presentation of several existing structures, most of them designed by Working Party members. General design calculations are not presented, but design results showing the improvement in structural behaviour are illustrated.

Download or read book Durability of Post tensioning Tendons written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The durability of post-tensioning tendons depends undoubtedly on the durability of the materials used, but there are design concept specifics which are also of major importance: the post-tensioning layout and layers of protection such as concrete cover and selected materials in view of the aggressivity of the environment for instance. It is well known that sustainability principles guide the Engineer from the very beginning, at the project conception, during construction and the service life of a structure. Decisions made during conceptual and design stage have the largest influence on the durability and sustainability of post-tensioning tendons. fibBulletin 33 addresses the specifics for prestressed concrete structures: the durability of post-tensioning tendons. It should be noted that it does not repeat topics that have been addressed in other fib bulletins and which is common for both reinforced concrete and prestressed concrete structures. Pre-tensioning, which is used extensively in the precast industry, is not considered here, although conclusions and recommendations herein may, in many cases, also be applicable. This recommendation was prepared by Working Party 5.4.2, Durability specifics for prestressed concrete structures, in cooperation with fib Commission 9,Reinforcing and prestressing materials and systems. A preliminary version of this recommendation served as the basic document for the second workshop on "Durability of post-tensioning tendons", held on 11-12 October 2004 in Zurich. This workshop was a follow-up to the first workshop held in Ghent in 2001. Bulletin 33 includes revisions corresponding to the agreed results of the Zurich workshop.

Download or read book Post tensioning Manual written by Post-Tensioning Institute and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Qualification and approval of prestressing contractors and system suppliers written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1998-10-01 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Recommendations for the design of flat slabs in post tension concrete using unbonded and bonded tendons written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1980-05-01 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book fib Model Code for Concrete Structures 2010 written by fib - federation internationale du beton and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

Download or read book Preparation of specifications for post tensioning work written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1992-10-01 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quality management systems for post tensioned concrete structures according to ISO 9001 written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1998-05-01 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Model Code 2010 Final draft written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-01-01 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of MC2010 are to (a) serve as a basis for future codes for concrete structures, and (b) present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. MC2010 includes the whole life cycle of a concrete structure, from design and construction to conservation (assessment, maintenance, strengthening) and dismantlement, in one code for buildings, bridges and other civil engineering structures. Design is largely based on performance requirements. The chapter on materials is extended with new types of concrete and reinforcement (such as fibres and non-metallic reinforcements). The fib Model Code 2010 also gives corresponding explanations in a separate column of the document. Additionally, MC2010 is supported by background documents that have already been (or will soon be) published in fib bulletins and journal articles. MC2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement.

Download or read book Construction of Prestressed Concrete Structures written by Ben C. Gerwick, Jr. and published by John Wiley & Sons. This book was released on 1997-02-13 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die zweite Auflage dieses Klassikers - jetzt als Paperback - bietet Profis auf diesem Gebiet eine aktuelle und kompetente Präsentation der Technologie der Vorbelastung von Stahlbeton. Grundlegende Techniken, Materialien und Systeme werden behandelt und vielfältige Anwendungen - Gebäude, Brücken, Bohrplattformen, Straßen, Rollbahnen, Rohrleitungen - erläutert.

Download or read book High Tech Concrete Where Technology and Engineering Meet written by D.A. Hordijk and published by Springer. This book was released on 2017-06-08 with total page 2859 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the fib Symposium “High Tech Concrete: Where Technology and Engineering Meet”, that was held in Maastricht, The Netherlands, in June 2017. This annual symposium was organised by the Dutch Concrete Association and the Belgian Concrete Association. Topics addressed include: materials technology, modelling, testing and design, special loadings, safety, reliability and codes, existing concrete structures, durability and life time, sustainability, innovative building concepts, challenging projects and historic concrete, amongst others. The fib (International Federation for Structural Concrete) is a not-for-profit association committed to advancing the technical, economic, aesthetic and environmental performance of concrete structures worldwide.