Download or read book Thin Walled Structures Advances and Developments written by J. Zaras and published by Elsevier. This book was released on 2001-06-18 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Third International Conference on Thin-Walled Structures, Cracow, Poland on June 5-7, 2001. There has been a substantial growth in knowledge in the field of Thin-Walled Structures over the past few decades. Lightweight structures are in widespread use in the Civil Engineering, Mechanical Engineering, Aeronautical, Automobile, Chemical and Offshore Engineering fields. The development of new processes, new methods of connections, new materials has gone hand-in-hand with the evolution of advanced analytical methods suitable for dealing with the increasing complexity of the design work involved in ensuring safety and confidence in the finished products.Of particular importance with regard to the analytical process is the growth in use of the finite element method. This method, about 40 years ago, was confined to rather specialist use, mainly in the aeronautical field, because of its requirements for substantial calculation capacity. The development over recent years of extremely powerful microcomputers has ensured that the application of the finite element method is now possible for problems in all fields of engineering, and a variety of finite element packages have been developed to enhance the ease of use and the availability of the method in the engineering design process.
Download or read book Thin Walled Structures written by J.Y. Richard Liew and published by Elsevier. This book was released on 1998-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-plated structures are used extensively in building construction, automobile, aircraft, shipbuilding and other industries because of a number of favourable factors such as high strength-weight ratio, development of new materials and processes and the availability of efficient analytical methods. This class of structure is made by joining thin plates together at their edges and they rely for their rigidity and strength upon the tremendous stiffness and load-carrying capacity of the flat plates from which they are made. Many of the problems encountered in these structures arise because of the effects of local buckling. The knowledge of various facets of this phenomenon has increased dramatically since the 1960s. Problem areas which were hitherto either too complex for rigorous analysis or whose subtleties were not fully realized have in these years been subjected to intensive study. Great advances have been made in the areas of inelastic buckling. The growth in use of lightweight strong materials, such as fibre-reinforced plastics has also been a contributory factor towards the need for advances in the knowledge of the far post-buckling range. The conference is a sequel to the international conference organised by the University of Strathclyde in December 1996 and this international gathering will provide the opportunity for discussion of recent developments and trends in design of thin-walled structures.
Download or read book Thin Walled Structures written by J. Loughlan and published by CRC Press. This book was released on 2018-02-06 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the Fourth International Conference of Thin-Walled Structures (ICTWS4), and contains 110 papers which, collectively, provide a comprehensive state-of-the-art review of the progress made in research, development and manufacture in recent years in thin-walled structures.The presentations at the conference had representation form 35 different countries and their topical areas of interest included aeroelastic response, structural-acoustic coupling, aerospace structures, analysis, design, manufacture, cold-formed structures, cyclic loading, dynamic loading, crushing, energy absorption, fatigue, fracture, damage tolerance, plates, stiffened panels, plated structures, polymer matrix composite members, sandwich structures, shell structures, thin-walled beams, columns and vibrational response. The range of applications of thin-walled structures has become increasingly diverse with a considerable deployment of thin-walled structural elements and systems being found in a wide range of areas within Aeronautical, Automotive, Civil, Mechanical, Chemical and Offshore Engineering fields. This volume is an extremely useful reference volume for researchers and designers working within a wide range of engineering disciplines towards the design, development and manufacture of efficient thin-walled structural systems.
Download or read book Fourth International Conference on Advances in Steel Structures written by Z Y Shen and published by Elsevier. This book was released on 2005-06-07 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume proceedings contains 11 invited keynote papers, 33 invited papers, and 225 contributed papers presented at the Fourth International Conference on Advances in Steel Structures (ICASS '05) held on 13-15 June 2005 in Shanghai, China. ICASS provides a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. Contributions to the papers came from 22 countries around the world and cover a wide spectrum of topics including: Constructional Steel, Hybrid Structures, Nonferrous Metals, Analysis of Beams and Columns, Computations, Frames, Design, Space Structures, Fabrication, along with a variety of other key subjects presented at the conference.
Download or read book Advances in Engineering Structures Mechanics Construction written by M. Pandey and published by Springer Science & Business Media. This book was released on 2007-02-10 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of an International Conference on Advances in Engineering Structures, Mechanics & Construction, held in Waterloo, Ontario, Canada, May 14-17, 2006. The contents include contains the texts of all three plenary presentations and all seventy-three technical papers by more than 153 authors, presenting the latest advances in engineering structures, mechanics and construction research and practice.
Download or read book Advanced Topics Of Thin walled Structures written by Haim Abramovich and published by World Scientific. This book was released on 2021-06-10 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.
Download or read book Advances in Structures written by Gregory J Hancock and published by CRC Press. This book was released on 2003 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an outcome of the international conference on advances in structures: steel, concrete, composite and aluminium in Sydney in 2003. It focuses on researches in composite design, fire engineering, light gauge construction, advanced structural analysis and concrete filled tubes.
Download or read book Fire Performance of Thin Walled Steel Structures written by Yong Wang and published by CRC Press. This book was released on 2020-04-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an authoritative account of the latest developments in fire performance and fire resistant design of thin-walled steel structures. It provides a comprehensive review of recent research, including fire tests of thin-walled steel structural members and systems, numerical modelling of heat transfer and structural behaviour, elevated temperature material properties, methods of improving fire resistance of thin-walled steel structures, and performance based fire resistant design methods. Worked examples navigate the reader through some of the complexities of this specialist subject. This is the first book devoted to the fundamental principles of this emerging subject, as thin-walled steel structures are increasingly being used in building construction. It will be valuable to fire protection engineers who want to optimise fire resistant design of thin-walled steel structures, and specialist manufacturers needing to control fire resistance of thin-walled steel structural systems, as well as to the research community.
Download or read book Buckling Experiments Experimental Methods in Buckling of Thin Walled Structures Volume 2 written by Josef Singer and published by John Wiley & Sons. This book was released on 2002-08-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Edited by Josef Singer, the world's foremost authority on structural buckling. * Time-saving and cost-effective design data for all structural, mechanical, and aerospace engineering researchers.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Recent Advancements in Geotechnical Engineering written by B. Soundara and published by Materials Research Forum LLC. This book was released on 2021-10-15 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical engineering has become an important discipline of civil engineering due to its rapid advancements and environmental challenges. Special emphasis is placed on innovative materials in the fields of geotechnical engineering, pavement engineering, health monitoring of structures and sustainability. Keywords: Green Building Materials, Cement Based Materials, Concrete Applications, Photocatalytic Effect on Paver Blocks, Stabilization of Black Cotton Soil, Concrete Filled Steel Tube Columns, Cenosphere, Fly Ash Brick, Stone Columns, Reinforced Concrete Beams, Interlocking Masonry Units, Lightweight Filler Materials, Soil Stabilization Using Fibres, Friction Stir Welding of Aluminum and Magnesium.
Download or read book Cold Formed Steel Design written by Wei-Wen Yu and published by John Wiley & Sons. This book was released on 2010-09-23 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute technical information and expert guidance you need to make optimum use of this incredibly versatile material for building construction. Wei-Wen Yu and Roger LaBoube, respected authorities in the field, draw upon decades of experience in cold-formed steel design, research, teaching, and development of design specifications to provide guidance on all practical aspects of cold-formed steel design for manufacturing, civil engineering, and building applications. Throughout the book, they describe the structural behavior of cold-formed steel members and connections from both the theoretical and experimental perspectives, and discuss the rationale behind the AISI and North American design provisions. Cold-Formed Steel Design, Fourth Edition features: Thoroughly up-to-date 2007 North American (AISI S100) design specifications Both ASD and LRFD methods for USA and Mexico LSD (Limit States Design) method for Canada A new chapter on the Direct Strength Method Updates and revisions of all 14 existing chapters In-depth design examples and explanation of design provisions Cold-Formed Steel Design, Fourth Edition is a necessary tool-of-the-trade for structural engineers, manufacturers, construction managers, and architects. It is also an excellent advanced text for college students and researchers in structural engineering, architectural engineering, construction engineering, and related disciplines.
Download or read book Recent Advances in Materials Technologies written by K. Rajkumar and published by Springer Nature. This book was released on 2022-09-19 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the first International Conference on Energy and Materials Technologies (ICEMT) 2021, organized by the Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, India. It covers the recent technologies in two broad thematic areas: energy and materials. Various topics covered in this book include advanced materials and characterization, mechanical behavior of materials, nanomaterials and nanotechnology, biomaterials, composite materials, environmental-friendly materials, structural materials, advances in aerospace technology, and advanced materials and manufacturing. The book is useful for students, researchers, and professionals in the area of mechanical engineering, especially various domains of materials.
Download or read book Current Advances in Mechanical Design Production IV written by Y. H. Kabil and published by Elsevier. This book was released on 2017-05-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of the state of the art in mechanical design and production. Both basic and applied research papers highlight recent trends, techniques and case studies in two major fields: analysis and design of mechanical systems and components; production and industrial engineering. This volume also includes all the invited keynote lectures presented at the conference. Contains 73 papers.
Download or read book Steel and Composite Structures written by Y. C. Wang and published by Taylor & Francis. This book was released on 2018-05-08 with total page 1099 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.
Download or read book Design of Metallic Cold Formed Thin Walled Members written by Aurelio Ghersi and published by CRC Press. This book was released on 2003-09-02 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design handbook, with a free windows-based computer programme on CD-ROM, allows the user to easily evaluate the strength of a cross-section and the buckling resistance of steel and aluminium members. Highlighting the theoretical basis of problems and the design approach necessary to overcome them, it comprehansively covers design to Eurocode 9, and AISI specifications. Design of Metallic Cold-formed Thin-walled Members is an essential handbook for structural engineers in the design office. The software programme enables quick, accurate calculations to be made, and can reduce design time considerably. It will also be of interest to academics and postgraduate students.
Download or read book High Performance and Optimum Design of Structures and Materials written by W. P. De Wilde and published by WIT Press. This book was released on 2014-06-09 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Addressing issues involving advanced types of structures, particularly those based on new concepts or new materials and their system design, contributions highlight the latest developments in design, optimisation, manufacturing and experimentation. Also included are contributions on new software, numerical methods and different optimisation techniques. Optimisation problems of interest involve those related to size, shape and topology of structures and materials. Most high performance structures require the development of a generation of new materials, which can more easily resist a range of external stimuli or react in a non-conventional manner. Particular emphasis is placed on intelligent structures and materials as well as the application of computational methods for their modelling, control and management. Optimisation techniques have much to offer to those involved in the design of new industrial products. The formulation of optimum design has evolved from the time it was purely an academic topic, able now to satisfy the requirements of real life prototypes. The development of new algorithms and the appearance of powerful commercial computer codes, with easy to use graphical interfaces, have created a fertile field for the incorporation of optimisation in the design process in all engineering disciplines. This proceedings volume is the first from a new edition of the High Performance Design of Structures and Materials and the Optimum Design of Structures conferences, which follows the success of a number of meetings that originated in 1989. Topics covered include: Composite materials & structures; Material characterisation; Experiments and numerical analysis; Steel structures; High performance concretes; Natural fibre composites; Transformable structures; Lightweight structures; Timber structures; Environmentally friendly and sustainable structures; Emerging structural applications; Optimisation in civil engineering; Evolutionary methods in optimisation; Shape and topology optimisation; Aerospace structures; Structural optimisation; Biomechanics application; Material optimisation; Life cost optimisation; Intelligence structures and smart materials.
