Download or read book Recent Developments in Micromechanics written by D.R. Axelrad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures presented at the mini-symposium on "Micromechanics" held in conjunction with the CSME Mechanical Engineer ing Forum 1990 between the 3rd and 8th June, 1990 at the University of Toronto, Canada. The expressed purpose of this symposium was to discuss some recent developments in the Micromechanics of Materials and how ad vances in this field now relate to the solution of practical engineer ing problems. Due to the time limit set for this section of the Engineer ing Forum as well as the restriction on the number of papers to be pre sented, it was not possible to cover a much wider range of topics. How ever, an attempt was made to include the most important advances asso ciated with the progress made in micromechanics in its application to material science and engineering over the past decade. Thus, the topics are concerned with: the fundamental aspects of the thermodynamics of structured solids (part I), - the micromechanical behaviour of alloys (part II), - the modelling of the material behaviour on the basis of continuum theory (part III), and finally the important new approach to the characterization of various mate rials and their responses to external agencies by the use of proba bilistic micromechanics (part IV). We would like to take this opportunity to thank the Chairman of the Organizing Committee, Prof. F. P. J. Rimrott, and the President of the CSME, Prof. T. S.
Download or read book Micromechanics of Composites written by Volodymyr Kushch and published by Butterworth-Heinemann. This book was released on 2013-05-13 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromechanics of Composites: Multipole Expansion Approach is the first book to introduce micromechanics researchers to a more efficient and accurate alternative to computational micromechanics, which requires heavy computational effort and the need to extract meaningful data from a multitude of numbers produced by finite element software code. In this book Dr. Kushch demonstrates the development of the multipole expansion method, including recent new results in the theory of special functions and rigorous convergence proof of the obtained series solutions. The complete analytical solutions and accurate numerical data contained in the book have been obtained in a unified manner for a number of the multiple inclusion models of finite, semi- and infinite heterogeneous solids. Contemporary topics of micromechanics covered in the book include composites with imperfect and partially debonded interface, nanocomposites, cracked solids, statistics of the local fields, and brittle strength of disordered composites. Contains detailed analytical and numerical analyses of a variety of micromechanical multiple inclusion models, providing clear insight into the physical nature of the problems under study Provides researchers with a reliable theoretical framework for developing the micromechanical theories of a composite’s strength, brittle/fatigue damage development and other properties Includes a large amount of highly accurate numerical data and plots for a variety of model problems, serving as a benchmark for testing the applicability of existing approximate models and accuracy of numerical solutions
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
Download or read book Recent Developments in Micromechanics written by D. R. Axelrad and published by Berlin : Springer-Verlag. This book was released on 1991 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.
Download or read book Nanomechanics and Micromechanics written by Satya Bir Singh and published by CRC Press. This book was released on 2020-05-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume enables readers to interpret and predict the effective mechanical properties of existing and emerging composites through modeling and design. The book addresses that materials and structures with small-scale dimensions do not behave in the same manner as their bulk counterparts. Once the dimensions of the materials are reduced to the micron and sub-micron range, their properties are subject to significant change. Thus, mechanical properties will be varied and will depend on the sample size. In the meantime, due to the large surface-to-volume ration of small structures, deformation mechanisms are subject to change. This volume integrates various approaches in micromechanics and nanomechanics into a unified mathematical framework, complete with coverage of both linear and nonlinear behaviors. It weaves together the basic concepts, mathematical fundamentals, and formulations of micromechanics and nanomechanics into a systemic approach for understanding and modeling the effective material behavior of composite materials. While providing information on recent developments in the mathematical framework of micro- and nanomechanics, the volume addresses highly localized phenomena and a number of interesting applications. It also illustrates application of micromechanical and nanomechanical theory to design novel engineering materials.
Download or read book Micromechanics and Nanoscale Effects written by Vasyl Michael Harik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of the state-of-the-art reports on new developments in micromechanics and the modeling of nanoscale effects, and is a companion book to the recent Kluwer volume on nanomechanics and mul- scale modeling (it is entitled Trends in Nanoscale Mechanics). The two volumes grew out of a series of discussions held at NASA Langley Research Center (LaRC), lectures and other events shared by many researchers from the national research laboratories and academia. The key events include the 2001 Summer Series of Round-Table Discussions on Nanotechnology at ICASE Institute (NASA LaRC) organized by Drs. V. M. Harik and M. D. Salas and the 2002 NASA LaRC Workshop on Multi-scale Modeling. The goal of these interactions was to foster collaborations between academic researchers and the ICASE Institute (NASA LaRC), a universi- based institute, which has pioneered world-class computational, theoretical and experimental research in the disciplines that are important to NASA. Editors gratefully acknowledge help of Ms. E. Todd (ICASE, NASA LaRC), the ICASE Director M. D. Salas and all reviewers, in particular, Dr. B. Diskin (ICASE/NIA, NASA LaRC), Prof. R. Haftka (University of Florida), Dr. V. M. Harik (ICASE/Swales Aerospace, NASA LaRC), Prof.
Download or read book Recent Developments and Innovative Applications in Computational Mechanics written by Dana Mueller-Hoeppe and published by Springer Science & Business Media. This book was released on 2011-01-11 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift is dedicated to Professor Dr.-Ing. habil. Peter Wriggers on the occasion of his 60th birthday. It contains contributions from friends and collaborators as well as current and former PhD students from almost all continents. As a very diverse group of people, the authors cover a wide range of topics from fundamental research to industrial applications: contact mechanics, finite element technology, micromechanics, multiscale approaches, particle methods, isogeometric analysis, stochastic methods and further research interests. In summary, the volume presents an overview of the international state of the art in computational mechanics, both in academia and industry.
Download or read book Recent Advances in Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2011-01-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 24 papers presented at the symposium on “Recent Advances in Mechanics” dedicated to the late Professor – Academician Pericles S. Theocaris in commemoration of the tenth anniversary of his death. The papers are written by world renowned and recognized experts in their fields and serve as a reference and guide for future research. The topics covered in the book can be divided into three major themes: Mathematical methods in applied mechanics (nine papers), experimental mechanics (nine papers) and fracture mechanics (six papers). Topics covered include: Application of reciprocity relations to laser-based ultrasonics, boundary value problems of the theory of elasticity, optimal design in contact mechanics, scaling of strength and lifetime distributions of quasibrittle structures, directional distortional hardening in plasticity, vibration of systems, instability phenomena in damped systems, variational methods for static and dynamic elasticity problems, an accelerated Newmark scheme for solving the equations of motion in the time domain, photoelastic tomography, electronic speckle pattern interferometry, composites exposed to fire, sampling moiré, microelecromechanical systems, experimental mechanics in nano-scale, advanced cement based nanocomposites, piezonuclear transmutations in brittle rocks under mechanical loading, stress triaxiality at crack tips studied by caustics, reinforcement of a cracked elastic plate with defects, some actual problems of fracture mechanics, cyclic plasticity with applications to extremely low cycle fatigue of structural steel, and fracture of a highly filled polymer composite.
Download or read book Micromechanics of Materials with Applications written by Mark Kachanov and published by Springer. This book was released on 2018-04-17 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on micromechanics explores both traditional aspects and the advances made in the last 10–15 years. The viewpoint it assumes is that the rapidly developing field of micromechanics, apart from being of fundamental scientific importance, is motivated by materials science applications. The introductory chapter provides the necessary background together with some less traditional material, examining e.g. approximate elastic symmetries, Rice’s technique of internal variables and multipole expansions. The remainder of the book is divided into the following parts: (A) classic results, which consist of Rift Valley Energy (RVE), Hill’s results, Eshelby’s results for ellipsoidal inhomogeneities, and approximate schemes for the effective properties; (B) results aimed at overcoming these limitations, such as volumes smaller than RVE, quantitative characterization of “irregular” microstructures, non-ellipsoidal inhomogeneities, and cross-property connections; (C) local fields and effects of interactions on them; and lastly (D) – the largest section – which explores applications to eight classes of materials that illustrate how to apply the micromechanics methodology to specific materials.
Download or read book Proceedings of the International Symposium on Recent Developments in Auditory Mechanics written by Hiroshi Wada and published by World Scientific. This book was released on 2000 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium held in 1999 near Sendai in Japan.
Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Micromechanics written by S. Nemat-Nasser and published by Elsevier. This book was released on 2013-10-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview is given in this book towards a fundamental understanding of the micromechanics of the overall response and failure modes of advanced materials, such as ceramics and ceramic and other composites. These advanced materials have become the focus of systematic and extensive research in recent times. The book consists of two parts. The first part reviews solids with microdefects such as cavities, cracks, and inclusions, as well as elastic composites. To render the book self-contained, the second part focuses on the fundamentals of continuum mechanics, particularly linear elasticity which forms the basis for the development of small deformation micromechanics. In Part 1, a fundamental and general framework for quantitative, rigorous analysis of the overall response and failure modes of microstructurally heterogeneous solids is systematically developed. These expressions apply to broad classes of materials with inhomogeneities and defects. While for the most part, the general framework is set within linear elasticity, the results directly translate to heterogeneous solids with rate-dependent or rate-independent inelastic constituents. This application is specifically referred to in various chapters. The general exact correlations obtained between the overall properties and the microstructure are then used together with simple models, to develop techniques for direct quantitative evaluation of the overall response which is generally described in terms of instantaneous overall moduli or compliance. The correlations among the corresponding results for a variety of problems are examined in great detail. The bounds as well as the specific results, include new observations and original developments, as well as an in-depth account of the state of the art. Part 2 focuses on Elasticity. The section on variational methods includes some new elements which should prove useful for application to advanced modeling, as well as solutions of composites and related heterogeneous bodies. A brief modern version of elements in vector and tensor algebra is provided which is particularly tailored to provide a background for the rest of this book. The data contained in this volume as Part 1 includes new results on many basic issues in micromechanics, which will be helpful to graduate students and researchers involved with rigorous physically-based modeling of overall properties of heterogeneous solids.
Download or read book Handbook of Micromechanics and Nanomechanics written by Shaofan Li and published by CRC Press. This book was released on 2016-04-19 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments and applications of micromechanics and nanomechanics. It particularly focuses on some recent applications and impact areas of micromechanics and nanomechanics that have not been discussed in traditional micromechanics and nanomechanics books on metamaterials, micromechanics of ferroelectric/piezoelectric,
Download or read book Recent Advances in Experimental Mechanics written by Isaac M. Daniel and published by Springer Science & Business Media. This book was released on 2002-06-30 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art volume covers a wide range of subjects in experimental mechanics including optical methods of stress analysis (photoelasticity, moirè, etc.), composite materials, sandwich construction, fracture mechanics, fatigue and damage, nondestructive evaluation, dynamic problems, foam, materials, fiber optic sensors, speckle metrology, digital image processing, nanotechnology, neutron diffraction and synchrotron radiation methods. Written by leading scientists in the field, the book contains 71 papers presented at the Symposium on "Recent Advances in Experimental Mechanics", which was organized in honor of Professor I.M. Daniel at Virginia Tech, on June 23-28, 2002. The book presents a thorough review of the latest problems of experimental mechanics. It is a vital supplement and reference source for researchers, practicing engineers and students.
Download or read book Advances in Micromechanics of Granular Materials written by H.H. Shen and published by Elsevier. This book was released on 2013-10-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 45 papers presented in this volume all share the common goal of constructing continuum models based on the micro behaviours of granular materials. Computer simulations continue to provide observations to aid modelling, while new experimental works begin to show promise for increased understanding in this area. Theoretical studies have extended into transitions between the rapid and quasi-static regimes and the fluid and solid mixture flows. Exciting new topics discussed in this volume include: concepts of a measure for randomness in quasi-static granular materials, which is analogous to the granular temperature in a rapid flow; scaling effects in granular media and their implications in both physical and computer simulations; instability; and boundary effects on heterogeneous behavior in simple flow configurations, which are posing new challenges for mathematical modelling. The volume will prove indispensable reading for researchers interested in the current developments in the fundamental aspects of mechanics of granular materials.
Download or read book Introduction To Micromechanics And Nanomechanics 2nd Edition written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2017-12-05 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic treatise on micromechanics and nanomechanics, which encompasses many important research and development areas such as composite materials and homogenizations, mechanics of quantum dots, multiscale analysis and mechanics, defect mechanics of solids including fracture and dislocation mechanics, etc.In this second edition, some previous chapters are revised, and some new chapters added — crystal plasticity, multiscale crystal defect dynamics, quantum force and stress, micromechanics of metamaterials, and micromorphic theory.The book serves primarily as a graduate textbook and intended as a reference book for the next generation of scientists and engineers. It also has a unique pedagogical style that is specially suitable for self-study and self-learning for many researchers and professionals who do not have time attending classes and lectures.