Download or read book Recent Developments in Cryogenics Research written by Sergiy Putselyk and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenics, a term commonly used to refer to very low temperatures, had its beginning in the latter half of the 19th century. Traditionally, this field is separated from Cryogenic Engineering and Low Temperature Physics (LTP). Cryogenic engineering is concerned with the design and development of low-temperature systems and components, while low temperature physics is more related to the fundamental research of material or fluid properties. This book discusses some recent findings and developments as well as gives an outlook on the fields of helium cryogenics and LTP. The main focus will be given to the helium cryogenics, though a smaller review is also presented for the fields of cryogenic energy storage facilities. Some future trends and R&D activities are also discussed. To orient the reader, the first four chapters are related to LTP, while the major part of the book is then devoted to helium cryogenics, for example, refrigeration techniques, cryostats, low temperature electronics, safety, etc.It should be particularly suited for advanced students, young researchers or engineers, who are intending to proceed with careers in helium cryogenics or LTP. However, the authors believe that the book will also be of value to experienced scientists, since it describes several very recent advances in experimental low temperature physics and technology, for example, ultra-low temperature technique and thermometry, as well as progress in helium cryogenics, such as heat transfer, cryostat designs for large facilities, and refrigerator developments. Extensive references are provided for the readers interested in the details of the cryogenic engineering advances. And last but not least, the authors hope that this book will widen the horizons of many without a solid state background, but with a general interest in low temperature physics and helium cryogenics.In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on many topics which here have had to be covered in very few pages or less. It is inevitable that not everyone will agree with the present choice, especially if it is their own subject which has been discussed very briefly or not mentioned at all, and the editor accepts full responsibility for the selections made. The book is written at a level which should be followed by a university graduate in science or engineering, although, if their background has not included a course in cryogenic engineering, general or solid-state physics, some groundwork may be lacking.
Download or read book Cryogenic Engineering written by Klaus D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a benchmark reference work on Cryogenic Engineering which chronicles the major developments in the field. Starting with an historical background, this book reviews the development of data resources now available for cryogenic fields and properties of materials. It presents the latest changes in cryopreservation and the advances over the past 50 years. The book also highlights an exceptional reference listing to provide referral to more details.
Download or read book Cryogenic Technology and Applications written by A.R. Jha and published by Elsevier. This book was released on 2011-04-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic Technology and Applications describes the need for smaller cryo-coolers as a result of the advances in the miniaturization of electrical and optical devices and the need for cooling and conducting efficiency. Cryogenic technology deals with materials at low temperatures and the physics of their behavior at these temps. The book demonstrates the ongoing new applications being discovered for cryo-cooled electrical and optical sensors and devices, with particular emphasis on high-end commercial applications in medical and scientific fields as well as in the aerospace and military industries. This book summarizes the important aspects of cryogenic technology critical to the design and development of refrigerators, cryo-coolers, and micro-coolers needed by various commercial, industrial, space and military systems. Cryogenic cooling plays an important role in unmanned aerial vehicle systems, infrared search and track sensors, missile warning receivers, satellite tracking systems, and a host of other commercial and military systems.* Provides an overview of the history of the development of cryogenic technology* Includes the latest information on micro-coolers for military and space applications* Offers detailed information on high-capacity cryogenic refrigerator systems used in applications such as food storage, high-power microwave and laser sensors, medical diagnostics, and infrared detectors
Download or read book Physics of Cryogenics written by Bahman Zohuri and published by Elsevier. This book was released on 2017-11-17 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Cryogenics: An Ultralow Temperature Phenomenon discusses the significant number of advances that have been made during the last few years in a variety of cryocoolers, such as Brayton, Joule-Thomson, Stirling, pulse tube, Gifford-McMahon and magnetic refrigerators. The book reviews various approaches taken to improve reliability, a major driving force for new research areas. The advantages and disadvantages of different cycles are compared, and the latest improvements in each of these cryocoolers is discussed. The book starts with the thermodynamic fundamentals, followed by the definition of cryogenic and the associated science behind low temperature phenomena and properties. This book is an ideal resource for scientists, engineers and graduate and senior undergraduate students who need a better understanding of the science of cryogenics and related thermodynamics. - Defines the fundamentals of thermodynamics that are associated with cryogenic processes - Provides an overview of the history of the development of cryogenic technology - Includes new, low temperature tables written by the author - Deals with the application of cryogenics to preserve objects at very low temperature - Explains how cryogenic phenomena work for human cell and human body preservations and new medical approaches
Download or read book Applications of Cryogenic Technology written by J. Patrick Kelley and published by Springer Science & Business Media. This book was released on 1991-06-30 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Cryogenic Technology, Vol. 10, is the proceedings from the portion of the conference CRYO-90 sponsored by the Cryogenic Society of America (CSA). CRYO-90, held on the campus of the State University of New York, Binghamton, New York, was an unusual interdisciplinary event, drawing from the life sciences as well as the physical science and engineering areas of the low temperature community. Co-sponsoring CRYO-90 with CSA were the Society for Cryobiology and the Symposium on Invertebrate and Plant Cold Hardiness. These latter two organizations brought an exciting developing field to the conference, a field whose exploration will lead to the betterment of all mankind through improved cryosurgical and organ preservation techniques in addition to improved agricultural and herd yields under extreme conditions. Specific goals of the cryobiological community are cryopreservation, the arrest and recovery of living processes of cells, tissues and organs; and cryosurgery - the local cryodestruction of diseased cells while preserving the healthy surrounding tissue. These goals present great technological challenges. The technological requirements of the cryobiologist include the ability to cool tissues 6 at rates of 10 degrees per second (vitrification), to thaw frozen tissue without damaging the delicate cells, to freeze dry tissue using molecular distillation (vacuum) drying, to supercool cell structures below O°C without freezing, and to successfully store the preserved tissues and organs for any required length of time.
Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.
Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1973 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hyatt Regency Hotel, Columbus, Ohio was the venue for the 1995 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Jim Peeples, of CVI, Inc., was conference chairman. Columbus is the home of the Battelle Memorial Institute, a pioneer in cryogenic materials development; the home of CVI, Inc., and Lake Shore Cryotronics, Inc., two leading manufacturers of cryogenic equipment; and it is the home of Ohio State University, where research on liquid helium has long been conducted. The program consisted of 315 CEC papers, nearly the same number as for CEC-91. This was the second largest number of papers ever submitted to the CEC. Of these, 252 papers are published here, in Volume 41 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a number of photographs taken during the awards lunch on July 20, 1995. Photographs have often been taken during the conferences, but they have never been used. The pictures are of the awardees, the conference chairs, and the organizers. They are distributed through out the books on pages that would otherwise have been blank. The pictures can be found on the following pages: 28, 232, 334, 536, 640, 826, 990, 1032, 1202, 1462,1682,1888, and 1994.
Download or read book Recent Advances and Applications in Cryogenic Propellant Densification Technology written by and published by . This book was released on 2000 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymers at Cryogenic Temperatures written by Susheel Kalia and published by Springer Science & Business Media. This book was released on 2013-03-26 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kalia and Fu's novel monograph covers cryogenic treatment, properties and applications of cryo-treated polymer materials. Written by numerous international experts, the twelve chapters in this book offer the reader a comprehensive picture of the latest findings and developments, as well as an outlook on the field. Cryogenic technology has seen remarkable progress in the past few years and especially cryogenic properties of polymers are attracting attention through new breakthroughs in space, superconducting, magnetic and electronic techniques. This book is a valuable resource for researchers, educators, engineers and graduate students in the field and at technical institutions.
Download or read book Hydrogen Hearings Before the Subcommittee on Energy Research Development and Demonstration of 94 1 June 10 12 1975 written by United States. Congress. House. Science and Technology Committee and published by . This book was released on 1975 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Biweekly Cryogenics Current Awareness Service written by and published by . This book was released on 1980 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Energy written by Bahman Zohuri and published by Springer. This book was released on 2018-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the challenges and solutions the energy sector faces by shifting towards a hydrogen based fuel economy. The most current and up-to-date efforts of countries and leaders in the automotive sector are reviewed as they strive to develop technology and find solutions to production, storage, and distribution challenges. Hydrogen fuel is a zero-emission fuel when burned with oxygen and is often used with electrochemical cells, or combustion in internal engines, to power vehicles and electric devices. This book offers unique solutions to integrating renewable sources of energy like wind or solar power into the production of hydrogen fuel, making it a cost effective, efficient and truly renewable alternative fuel.
Download or read book Cryogenic Engineering and Technologies written by Dr. Zuyu Zhao and published by CRC Press. This book was released on 2019-10-16 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogen-free cryogenics is leading a revolution in research and industry by its significant advantages over traditional liquid helium systems. This is the first overview for the field, covering the key technologies, conceptual design, fabrication, operation, performance, and applications of these systems. The contents cover important topics such as the operating principles of 4K cryocoolers, enabling technologies (including vibration reduction) for cryogen free systems, the cryogen- free superconducting magnet, and cryogen-free systems that reach mK. It highlights the wide range of applications in materials science, quantum physics, astronomy and space science, medical sciences and etc. Key features: Introduce technologies and practical know-how employed for cryogen-free systems of using 4 K cryocoolers to replace liquid helium; Address state of the arts of cryogen-free superconducting magnets, sub-kelvin refrigeration systems of He-3 sorption cooler, adiabatic demagnetization refrigerator (ADR) and dilution refrigerators (DR). Discuss applications of cryogen-free systems in modern instruments and equipment.
Download or read book Cryocoolers 10 written by Ronald G. Jr. Ross and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryocoolers 10 is the premier archival publication of the latest advances and performance of small cryogenic refrigerators designed to provide localized cooling for military, space, semi-conductor, medical, computing, and high-temperature superconductor cryogenic applications in the 2-200 K temperature range. Composed of papers written by leading engineers and scientists in the field, Cryocoolers 10 reports the most recent advances in cryocooler development, contains extensive performance test results and comparisons, and relates the latest experience in integrating cryocoolers into advanced applications.
Download or read book The Safe Use of Cryogenic Technologies written by Robert Done and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Cryogenic Engineering written by Quan-Sheng Shu and published by Springer. This book was released on 2013-12-19 with total page 967 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. • In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.
Download or read book Helium Cryogenics written by Steven W. Van Sciver and published by Springer Science & Business Media. This book was released on 2012-02-10 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty five years have elapsed since the original publication of Helium Cryogenics. During this time, a considerable amount of research and development involving helium fluids has been carried out culminating in several large-scale projects. Furthermore, the field has matured through these efforts so that there is now a broad engineering base to assist the development of future projects. Helium Cryogenics, 2nd edition brings these advances in helium cryogenics together in an updated form. As in the original edition, the author's approach is to survey the field of cryogenics with emphasis on helium fluids. This approach is more specialized and fundamental than that contained in other cryogenics books, which treat the associated range of cryogenic fluids. As a result, the level of treatment is more advanced and assumes a certain knowledge of fundamental engineering and physics principles, including some quantum mechanics. The goal throughout the work is to bridge the gap between the physics and engineering aspects of helium fluids to provide a source for engineers and scientists to enhance their usefulness in low-temperature systems. Dr. Van Sciver is a Distinguished Research Professor and John H. Gorrie Professor of Mechanical Engineering at Florida State University. He is also a Program Director at the National High Magnetic Field Laboratory (NHMFL). Dr. Van Sciver joined the FAMU-FSU College of Engineering and the NHMFL in 1991, initiating and teaching a graduate program in magnet and materials engineering and in cryogenic thermal sciences and heat transfer. He also led the NHMFL development efforts of the cryogenic systems for the NHMFL Hybrid and 900 MHz NMR superconducting magnets. Between 1997 and 2003, he served as Director of Magnet Science and Technology at the NHMFL. Dr. Van Sciver is a Fellow of the ASME and the Cryogenic Society of America and American Editor for the journal Cryogenics. He is the 2010 recipient of the Kurt Mendelssohn Award. Prior to joining Florida State University, Dr. Van Sciver was Research Scientist and then Professor of Nuclear Engineering, Engineering Physics and Mechanical Engineering at the University of Wisconsin-Madison from 1976 to 1991. During that time he also served as the Associate Director of the Applied Superconductivity Center. Dr. Van Sciver received his PhD in Low Temperature Physics from the University of Washington-Seattle in 1976. He received his BS degree in Engineering Physics from Lehigh University in 1970. Dr. Van Sciver is author of over 200 publications and patents in low temperature physics, liquid helium technology, cryogenic engineering and magnet technology. The first edition of Helium Cryogenics was published by Plenum Press (1986). The present work is an update and expansion of that original project.
