Download or read book Recent Developments in Approaches to Pulsed Detonation Propulsion written by A. J. Dean and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detonation Control for Propulsion written by Jiun-Ming Li and published by Springer. This book was released on 2017-12-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest developments in detonation engines for aerospace propulsion, with a focus on the rotating detonation engine (RDE). State-of-the-art research contributions are collected from international leading researchers devoted to the pursuit of controllable detonations for practical detonation propulsion. A system-level design of novel detonation engines, performance analysis, and advanced experimental and numerical methods are covered. In addition, the world’s first successful sled demonstration of a rocket rotating detonation engine system and innovations in the development of a kilohertz pulse detonation engine (PDE) system are reported. Readers will obtain, in a straightforward manner, an understanding of the RDE & PDE design, operation and testing approaches, and further specific integration schemes for diverse applications such as rockets for space propulsion and turbojet/ramjet engines for air-breathing propulsion. Detonation Control for Propulsion: Pulse Detonation and Rotating Detonation Engines provides, with its comprehensive coverage from fundamental detonation science to practical research engineering techniques, a wealth of information for scientists in the field of combustion and propulsion. The volume can also serve as a reference text for faculty and graduate students and interested in shock waves, combustion and propulsion.
Download or read book A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs written by National Research Council and published by National Academies Press. This book was released on 2007-01-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocket and air-breathing propulsion systems are the foundation on which planning for future aerospace systems rests. A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs assesses the existing technical base in these areas and examines the future Air Force capabilities the base will be expected to support. This report also defines gaps and recommends where future warfighter capabilities not yet fully defined could be met by current science and technology development plans.
Download or read book Development of a Gas Fed Pulse Detonation Research Engine written by R. J. Litchford and published by . This book was released on 2001 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 39th AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit July 20 23 2003 Huntsville Alabama no 4799 written by and published by . This book was released on 2003 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulse Detonation Propulsion Proof of Concept Test Article Development written by T. R. A. Bussing and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 40th AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit July 11 14 2004 Fort Lauderdale FL 04 3850 04 3899 written by and published by . This book was released on 2004 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulse Detonation Engine written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2021-10-14 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Pulse Detonation Engine A pulse detonation engine (PDE) is a type of propulsion system that uses detonation waves to combust the fuel and oxidizer mixture. The engine is pulsed because the mixture must be renewed in the combustion chamber between each detonation wave and the next. Theoretically, a PDE can operate from subsonic up to a hypersonic flight speed of roughly Mach 5. An ideal PDE design can have a thermodynamic efficiency higher than other designs like turbojets and turbofans because a detonation wave rapidly compresses the mixture and adds heat at constant volume. Consequently, moving parts like compressor spools are not necessarily required in the engine, which could significantly reduce overall weight and cost. PDEs have been considered for propulsion since 1940. Key issues for further development include fast and efficient mixing of the fuel and oxidizer, the prevention of autoignition, and integration with an inlet and nozzle. To date, no practical PDE has been put into production, but several testbed engines have been built and one was successfully integrated into a low-speed demonstration aircraft that flew in sustained PDE powered flight in 2008. In June 2008, the Defense Advanced Research Projects Agency (DARPA) unveiled Blackswift, which was intended to use this technology to reach speeds of up to Mach 6 How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Pulse Detonation Engine Chapter 2: Nuclear Pulse Propulsion Chapter 3: Rotating Detonation Engine Chapter 4: AIMStar Chapter 5: Antimatter-catalyzed nuclear pulse propulsion Chapter 6: Antimatter rocket Chapter 7: Nuclear electric rocket Chapter 8: Nuclear power in space Chapter 9: Nuclear propulsion Chapter 10: Nuclear thermal rocket Chapter 11: Project Pluto Chapter 12: Fission-fragment rocket (II) Answering the public top questions about pulse detonation engine. (III) Real world examples for the usage of pulse detonation engine in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technology in each industry to have 360-degree full understanding of pulse detonation engine' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of pulse detonation engine.
Download or read book 41st AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit 10 13 July 2005 Tucson Arizona 05 4200 05 4249 written by and published by . This book was released on 2005 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gasdynamic Phenomena and Propulsive Performance of Pulse Detonation Engines written by James T. Peace and published by . This book was released on 2019 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pulsed detonation engine (PDE) is an advanced propulsion system that makes use of intermittent detonations to provide thrust. In recent decades, the PDE has been at the center of various propulsion research efforts focused on practical implementation of a reliable detonation-based engine for aerospace propulsion applications. However, many design challenges remain to be solved due to the PDEs unsteady operating characteristics. In particular, the unsteady nature of the thrust chamber flow field inherent to the PDE operation makes the design of nozzles aimed at adequately expanding the burned detonation products especially difficult. In order to address this design challenge, a series of related analytical, numerical, and experimental studies have been conducted, which are focused on investigating the manner in which the PDE propulsive performance is governed by the various gasdynamic processes occurring within the thrust chamber and nozzle flow fields. In this study, three primary PDE configurations are considered. These configurations include fully- and partially-filled PDEs, and PDEs equipped with diverging nozzles. For each configuration, a comprehensive description of the PDE flow field is provided, whereby details concerning the evolution and interaction of various gasdynamic waves and discontinuities are discussed. Additionally, the dominant gasdynamic processes within the thrust chamber and nozzle flow fields are identified, as these processes must be appropriately modeled in order to accurately evaluate the propulsive performance.The collision of a detonation wave with a contact surface separating detonable and non-combustible mixtures is a fundamental gasdynamic interaction process that takes place every cycle in the cyclic operation of the PDE. This interaction can drastically influence the evolving thrust chamber flow field and the subsequent propulsive performance metrics. To improve its understanding, this gasdynamic interaction is investigated analytically in order to predict the resulting transmitted shock wave properties, and the necessary conditions for a shock, Mach, or rarefaction wave to reflect at the contact surface. Concurrently, this interaction is investigated experimentally with the use of a detonation-driven shock tube. The analytical and experimental results indicate that the transmitted shock can either be amplied or attenuated depending on the reflection type at the contact surface, and the ratio of the acoustic impedance across the interface. A quasi-one-dimensional method of characteristics (MOC) model is developed to evaluate the single-cycle gasdynamic flow field and associated propulsive performance of general PDE configurations. The model incorporates the current detonation-contact surface interaction results in order to accurately treat the one-dimensional collision of a detonation wave with a contact discontinuity. Additionally, the MOC model is developed using a simplified unit process approach with an explicit inverse time marching algorithm in order to readily construct the complex thrust chamber flow field along a predefined grid. A thorough validation of the model is presented over a broad range of operating conditions with existing higher-fidelity numerical and experimental performance data for fully- and partially-filled PDEs, and PDEs equipped with diverging nozzles. This includes PDEs operating with a variety of detonable fuels, non-combustible inert mixtures, ll fractions, blowdown pressure ratios, and nozzle expansion area ratios. Lastly, a detailed discussion of the model limitations is provided, and particular operating conditions that lead to a breakdown of the assumptions used in the development of the model are addressed. A simplified analytical model is developed based on control volume analysis for evaluating the primary performance metrics of a general fully-filled PDE. The MOC model is used to justify and establish a simplified thrust relation based solely on the ow properties at the exit plane of a fully-filled PDE. A detailed analytical description of the thrust chamber flow field is provided, from which an analytical piece wise expression for thrust is derived based on the exit plane pressure history. This expression is then used to evaluate the specific impulse, total impulse, and time-averaged thrust of a fully-filled PDE. This simplified model is validated against the current MOC model and higher-fidelity numerical and experimental performance data for a variety of detonable fuels, equivalence ratios, and blowdown pressure ratios.Using the current MOC model, the single-cycle propulsive performance of partially-filled PDEs is investigated. The results of the detonation-contact surface interaction study are used to tailor the acoustic impedance of the non-combustible mixture at a fixed fill fraction in order to demonstrate the sensitivity of the thrust chamber flow field to the non-combustible acoustic impedance. Subsequently, the detonable fill fraction and noncombustible acoustic impedance are varied simultaneously in order to characterize the general partially-lled PDE performance. The partial-filling performance benefit is also investigated by varying the initial pressure and temperature of the non-combustible mixture in order to highlight the advantage of using a cold purge gas during operation, and disadvantage of operating in sub-atmospheric environments. It is demonstrated that the partially-filled specific impulse performance results generated with the MOC model from these various parametric investigations are successfully modeled using a previously developed scaling law, whereby this scaling law is extended in the current work to partially-filled total impulse and time-averaged thrust.Similarly, the single-cycle propulsive performance of PDEs with diverging nozzles is examined. A parametric investigation is conducted to characterize the combined effects of nozzle expansion area and blowdown pressure ratios on the resulting thrust chamber and nozzle flow fields. Detailed discussion of the transient nozzle flow field is provided in order to emphasize the influence of non-combustible acoustic impedance on the partial-fill effect in diverging nozzles. Moreover, a comparative study is used to demonstrate the performance advantages of a diverging nozzle in sub-atmospheric environments compared to a straight extension nozzle. Lastly, a detailed parametric investigation is conducted by simultaneously varying the nozzle length, expansion area ratio, and blowdown pressure ratio in order to determine the optimum nozzle performance characteristics. An analytical model is formulated to predict the strength and motion of a transmitted shock wave through a general contour diverging nozzle for PDEs. The model is derived on the basis of a two-equation approximation of the generalized CCW (Chester Chisnell Whitham) theory for treating general shock dynamics in non-uniform channels. A major feature of the two-equation model is the ability to incorporate non-uniformity in the flow immediately following the shock wave, which turns out to be essential for describing the transmitted shock dynamics in PDE nozzles. This model is then used to demonstrate the effects of thrust chamber length on the magnitude of ow non-uniformity behind the transmitted shock entering the nozzle, and how drastically this can influence the nature of shock attenuation within the nozzle. Further, the shock dynamics model is used in conjunction with the MOC model to demonstrate how different nozzle wall curvature influences the PDE propulsive performance, due to the changes in transmitted shock attenuation and gasdynamic over-expansion in the nozzle flow field during the nozzle starting process.
Download or read book Joint Meeting of the U S Sections of the Combustion Institute Western States Central States Eastern States written by and published by . This book was released on 1999 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AIAA Aerospace Sciences Meeting and Exhibit 42nd written by and published by . This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wet op de vermogensbelasting written by and published by . This book was released on 1892 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Spacecraft Propulsion Systems written by Claudio Bruno and published by Springer Science & Business Media. This book was released on 2009-03-20 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understandable perspective on the types of space propulsion systems necessary to enable low-cost space flights to Earth orbit and to the Moon and the future developments necessary for exploration of the solar system and beyond to the stars.
Download or read book Progress on Pulsed Detonation Rocket Propulsion at AFRL Constant Volume Limit Studies and LOX Spray Detonations written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress and plans for research at AFRL on pulsed-detonation rocket engines are described. Analytical studies of the constant-volume limit of pulsed-propulsion have been completed and have shown that the specific impulse penalty of using a fixed area ratio nozzle is less than 3%. Numerical studies of pulsed combustors have elucidated the importance of characteristic times for heat release, chamber blowdown and injector pulsing period. Experimental studies are under way to demonstrate the feasibility of the concept and provide anchoring data for the model. Plans for LOX spray detonation studies are described.
Download or read book New Detonation Concepts for Propulsion and Power Generation written by Eric M. Braun and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A series of related analytical and experimental studies are focused on utilizing detonations for emerging propulsion and power generation devices. An understanding of the physical and thermodynamic processes for this unsteady thermodynamic cycle has taken over 100 years to develop. An overview of the thermodynamic processes and development history is provided. Thermodynamic cycle analysis of detonation-based systems has often been studied using surrogate models. A real gas model is used for a thermal e ciency prediction of a detonation wave based on the work and heat speci ed by process path diagrams and a control volume analysis. A combined rst and second law analysis aids in understanding performance trends for di erent initial conditions. A cycle analysis model for an airbreathing, rotating detonation wave engine (RDE) is presented. The engine consists of a steady inlet system with an isolator which delivers air into an annular combustor. A detonation wave continuously rotates around the combustor with side relief as the ow expands towards the nozzle. Air and fuel enter the combustor when the rarefaction wave pressure behind the detonation front drops to the inlet supply pressure. To create a stable RDE, the inlet pressure is matched in a convergence process with the average combustor pressure by increasing the annulus channel width with respect to the isolator channel. Performance of this engine is considered using several parametric studies. RDEs require a fuel injection system that can cycle beyond the limits of mechanical valves. Fuel injectors composed of an ori ce connected to a small plenum cavity were mounted on a detonation tube. These fuel injectors, termed uidic valves, utilize their geometry and a supply pressure to deliver fuel and contain no moving parts. Their behavior is characterized in order to determine their feasibility for integration with high-frequency RDEs. Parametric studies have been conducted with the type of fuel injected, the ori ce diameter, and the plenum cavity pressure. Results indicate that the detonation wave pressure temporarily interrupts the uidic valve supply, but the wave products can be quickly expelled by the fresh fuel supply to allow for refueling. The interruption time of the valve scales with injection and detonation wave pressure ratios as well as a characteristic time. The feasibility of using a detonation wave as a source for producing power in conjunction with a linear generator is considered. Such a facility can be constructed by placing a piston{spring system at the end of a pulsed detonation engine (PDE). Once the detonation wave re ects o the piston, oscillations of the system drive the linear generator. An experimental facility was developed to explore the interaction of a gaseous detonation wave with the piston. Experimental results were then used to develop a model for the interaction. Governing equations for two engine designs are developed and trends are established to indicate a feasible design space for future development.
Download or read book New Developments in Computational Fluid Dynamics written by Kozo Fujii and published by Springer Science & Business Media. This book was released on 2006-01-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 20 papers presented at the Sixth International Nobeyama Workshop on the New Century of Computational Fluid Dynamics, Nobeyama, Japan, April 21-24, 2003. These papers cover computational electromagnetics, astrophysical topics, CFD research and applications in general, large-eddy simulation, mesh generation topics, visualization, and more.