Download or read book Recent Advances in Modeling Analysis and Systems Control Theoretical Aspects and Applications written by El Hassan Zerrik and published by Springer Nature. This book was released on 2019-08-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes recent developments in a wide range of areas, including the modeling, analysis and control of dynamical systems, and explores related applications. The book provided a forum where researchers have shared their ideas, results on theory, and experiments in application problems. The current literature devoted to dynamical systems is quite large, and the authors’ choice for the considered topics was motivated by the following considerations. Firstly, the mathematical jargon for systems theory remains quite complex and the authors feel strongly that they have to maintain connections between the people of this research field. Secondly, dynamical systems cover a wider range of applications, including engineering, life sciences and environment. The authors consider that the book is an important contribution to the state of the art in the fuzzy and dynamical systems areas.

Download or read book Model Order Reduction Theory Research Aspects and Applications written by Wilhelmus H. Schilders and published by Springer Science & Business Media. This book was released on 2008-08-27 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book originated during the workshop “Model order reduction, coupled problems and optimization” held at the Lorentz Center in Leiden from S- tember 19–23, 2005. During one of the discussion sessions, it became clear that a book describing the state of the art in model order reduction, starting from the very basics and containing an overview of all relevant techniques, would be of great use for students, young researchers starting in the ?eld, and experienced researchers. The observation that most of the theory on model order reduction is scattered over many good papers, making it dif?cult to ?nd a good starting point, was supported by most of the participants. Moreover, most of the speakers at the workshop were willing to contribute to the book that is now in front of you. The goal of this book, as de?ned during the discussion sessions at the workshop, is three-fold: ?rst, it should describe the basics of model order reduction. Second, both general and more specialized model order reduction techniques for linear and nonlinear systems should be covered, including the use of several related numerical techniques. Third, the use of model order reduction techniques in practical appli- tions and current research aspects should be discussed. We have organized the book according to these goals. In Part I, the rationale behind model order reduction is explained, and an overview of the most common methods is described.

Download or read book Recent Advances in Model Predictive Control written by Timm Faulwasser and published by Springer Nature. This book was released on 2021-04-17 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on distributed and economic Model Predictive Control (MPC) with applications in different fields. MPC is one of the most successful advanced control methodologies due to the simplicity of the basic idea (measure the current state, predict and optimize the future behavior of the plant to determine an input signal, and repeat this procedure ad infinitum) and its capability to deal with constrained nonlinear multi-input multi-output systems. While the basic idea is simple, the rigorous analysis of the MPC closed loop can be quite involved. Here, distributed means that either the computation is distributed to meet real-time requirements for (very) large-scale systems or that distributed agents act autonomously while being coupled via the constraints and/or the control objective. In the latter case, communication is necessary to maintain feasibility or to recover system-wide optimal performance. The term economic refers to general control tasks and, thus, goes beyond the typically predominant control objective of set-point stabilization. Here, recently developed concepts like (strict) dissipativity of optimal control problems or turnpike properties play a crucial role. The book collects research and survey articles on recent ideas and it provides perspectives on current trends in nonlinear model predictive control. Indeed, the book is the outcome of a series of six workshops funded by the German Research Foundation (DFG) involving early-stage career scientists from different countries and from leading European industry stakeholders.

Download or read book Handbook of Research on Modeling Analysis and Control of Complex Systems written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2020-12-05 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current literature on dynamic systems is quite comprehensive, and system theory’s mathematical jargon can remain quite complicated. Thus, there is a need for a compendium of accessible research that involves the broad range of fields that dynamic systems can cover, including engineering, life sciences, and the environment, and which can connect researchers in these fields. The Handbook of Research on Modeling, Analysis, and Control of Complex Systems is a comprehensive reference book that describes the recent developments in a wide range of areas including the modeling, analysis, and control of dynamic systems, as well as explores related applications. The book acts as a forum for researchers seeking to understand the latest theory findings and software problem experiments. Covering topics that include chaotic maps, predictive modeling, random bit generation, and software bug prediction, this book is ideal for professionals, academicians, researchers, and students in the fields of electrical engineering, computer science, control engineering, robotics, power systems, and biomedical engineering.

Download or read book Advances in the Theory of Control Signals and Systems with Physical Modeling written by Jean Levine and published by Springer Science & Business Media. This book was released on 2010-09-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 60's, control, signals and systems had a common linear algebraic background and, according to their evolution, their respective backgrounds have now dramatically differed. Recovering such a common background, especially in the nonlinear context, is currently a fully open question. The role played by physical models, finite or infinite dimensional, in this hypothetical convergence is extensively discussed in this book. The discussion does not only take place on a theoretical basis but also in the light of two wide classes of applications, among the most active in the current industrially oriented researches: - Electrical and Mechatronical systems; - Chemical Processes and systems appearing in Life Sciences. In this perspective, this book is a contribution to the enhancement of the dialogue between theoretical laboratories and more practically oriented ones and industries. This book is a collection of articles that have been presented by leading international experts at a series of three workshops of a Bernoulli program entitled “Advances in the Theory of Control, Signals and Systems, with Physical Modeling” hosted by the Bernoulli Centre of EPFL during the first semester of 2009. It provides researchers, engineers and graduate students with an unprecedented collection of topics and internationally acknowledged top-quality works and surveys.

Download or read book Process Modelling and Model Analysis written by Ian T. Cameron and published by Elsevier. This book was released on 2001-05-23 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Modelling and Model Analysis describes the use of models in process engineering. Process engineering is all about manufacturing--of just about anything! To manage processing and manufacturing systematically, the engineer has to bring together many different techniques and analyses of the interaction between various aspects of the process. For example, process engineers would apply models to perform feasibility analyses of novel process designs, assess environmental impact, and detect potential hazards or accidents. To manage complex systems and enable process design, the behavior of systems is reduced to simple mathematical forms. This book provides a systematic approach to the mathematical development of process models and explains how to analyze those models. Additionally, there is a comprehensive bibliography for further reading, a question and answer section, and an accompanying Web site developed by the authors with additional data and exercises. Introduces a structured modeling methodology emphasizing the importance of the modeling goal and including key steps such as model verification, calibration, and validation Focuses on novel and advanced modeling techniques such as discrete, hybrid, hierarchical, and empirical modeling Illustrates the notions, tools, and techniques of process modeling with examples and advances applications

Download or read book Recent Advances in Technology Acceptance Models and Theories written by Mostafa Al-Emran and published by Springer Nature. This book was released on 2021-04-16 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles the latest research trends in technology acceptance models and theories. It presents high-quality empirical and review studies focusing on the main theoretical models and their applications across various technologies and contexts. It also provides insights into the theoretical and practical aspects of different technological innovations that assist decision-makers in formulating the required policies and procedures for adopting a specific technology.

Download or read book System Theory written by Theodore E. Djaferis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Theory: Modeling, Analysis and Control contains thirty-three scientific papers covering a wide range of topics in systems and control. These papers have been contributed to a symposium organized to celebrate Sanjoy K. Mitter's 65th birthday. The following research topics are addressed: distributed parameter systems, stochastic control, filtering and estimation, optimization and optimal control, image processing and vision, hierarchical systems and hybrid control, nonlinear systems, and linear systems. Also included are three survey papers on optimization, nonlinear filtering, and nonlinear systems. Recent advances are reported on the behavioral approach to systems, the relationship between differential games and robust control, estimation of diffusion processes, Markov processes, optimal control, hybrid control, stochastic control, spectral estimation, nonconvex quadratic programming, robust control, control algorithms and quantized linear systems. Innovative explorations are carried out on quantum systems from a control theory perspective, option valuation and hedging, three-dimensional medical visualization, computational structure biology image processing, and hierarchical approaches to complex systems, flow control, scheduling and force feedback in fluid mechanics. The contents reflect on past research accomplishments, current research activity, and future research directions in systems and control theory.

Download or read book Uncertainty Modelling and Analysis written by Bilal M. Ayyub and published by Elsevier Publishing Company. This book was released on 1994 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vital information on machine intelligence and pattern recognition is provided by this publication. In particular, the 31 papers discuss the ways in which uncertainty modelling and analysis are becoming an integral part of system definition and modelling in many fields. Contributions are sourced from an international base of researchers, scientists and engineers working on theoretical developments and diversified applications in engineering systems. The book is divided into two main parts. The first, Uncertainty Models and Measures, includes chapters on theoretical studies and developments carried out on uncertainty (including cognitive uncertainty and how it relates to information and intelligence), information, fuzzy logic, expert systems and neural networks. There are also chapters on modelling uncertainty in the reliability assessment of complex systems, linguistic connectives, the principle of maximum buoyancy, uncertain evidence, inductive learning, convex modelling, new uncertainty measures and information and uncertainty.The larger second part, Applications to Engineering Systems, contains application-oriented studies in fields related to civil, electrical, energy and general engineering systems. The papers cover studies on general uncertainty types in structural engineering, bridges, transmission structures, structural reliability, structural identification, system life cycle analysis, control, construction activities, decision analysis, signal detection, risk management, product quality, military command and control, data bases, long-term projections and predictions and assessment of insurance indices.The book conveys the excitement, advances and promises that all these fields offer to our expanding information-based technological society. It also hopes to stimulate the interest of other researchers around the world who are facing the challenge of new theoretical studies and innovative technological changes.

Download or read book Advances in Dynamical Systems and Control written by Victor A. Sadovnichiy and published by Springer. This book was released on 2016-08-16 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on recent advances, this book covers theoretical foundations as well as various applications. It presents modern mathematical modeling approaches to the qualitative and numerical analysis of solutions for complex engineering problems in physics, mechanics, biochemistry, geophysics, biology and climatology. Contributions by an international team of respected authors bridge the gap between abstract mathematical approaches, such as applied methods of modern analysis, algebra, fundamental and computational mechanics, nonautonomous and stochastic dynamical systems on the one hand, and practical applications in nonlinear mechanics, optimization, decision making theory and control theory on the other. As such, the book will be of interest to mathematicians and engineers working at the interface of these fields.

Download or read book Control Systems written by Vsevolod Kuntsevich and published by CRC Press. This book was released on 2022-09-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the development of advanced methods of control theory with focus on its practical implementation in various fields of human activity such as space control, robotics, control applications in marine systems, control processes in agriculture and food production.Control Systems: Theory and Applications consists of selected best papers which were presented at XXIV International conference on automatic control “Automatics 2017” (September 13-15, 2017, Kyiv, Ukraine) organized by Ukrainian Association on Automatic Control (National member organization of IFAC – International Federation on Automatic Control) and National University of Life and Environmental Sciences of Ukraine. More than 120 presentations where discussed at the conference, with participation of the scientists from the numerous countries. The book is divided into two main parts, a first on Theory of Automatic Control (5 chapters) and the second on Control Systems Applications (8 chapters). The selected chapters provide an overview of challenges in the area of control systems design, modeling, engineering and implementation and the approaches and techniques that relevant research groups within this area are employing to try to resolve these.This book on advanced methods of control theory and successful cases in the practical implementation is ideal for personnel in modern technological processes automation and SCADA systems, robotics, space and marine industries as well as academic staff and master/research students in computerized control systems, automatized and computer-integrated systems, electrical and mechanical engineering.

Download or read book Recent Advances in Control Problems of Dynamical Systems and Networks written by Ju H. Park and published by Springer Nature. This book was released on 2020-08-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book introduces readers to new analytical techniques and controller design schemes used to solve the emerging “hottest” problems in dynamic control systems and networks. In recent years, the study of dynamic systems and networks has faced major changes and challenges with the rapid advancement of IT technology, accompanied by the 4th Industrial Revolution. Many new factors that now have to be considered, and which haven’t been addressed from control engineering perspectives to date, are naturally emerging as the systems become more complex and networked. The general scope of this book includes the modeling of the system itself and uncertainty elements, examining stability under various criteria, and controller design techniques to achieve specific control objectives in various dynamic systems and networks. In terms of traditional stability matters, this includes the following special issues: finite-time stability and stabilization, consensus/synchronization, fault-tolerant control, event-triggered control, and sampled-data control for classical linear/nonlinear systems, interconnected systems, fractional-order systems, switched systems, neural networks, and complex networks. In terms of introducing graduate students and professional researchers studying control engineering and applied mathematics to the latest research trends in the areas mentioned above, this book offers an excellent guide.

Download or read book Model Based Control written by Paul M.J. van den Hof and published by Springer Science & Business Media. This book was released on 2009-08-05 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Based Control will be a collection of state-of-the-art contributions in the field of modelling, identification, robust control and optimization of dynamical systems, with particular attention to the application domains of motion control systems (high-accuracy positioning systems) and large scale industrial process control systems.The book will be directed to academic and industrial people involved in research in systems and control, industrial process control and mechatronics.

Download or read book Nonlinear Dynamics New Directions written by Hernán González-Aguilar and published by Springer. This book was released on 2015-02-10 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, along with its companion volume, Nonlinear Dynamics New Directions: Theoretical Aspects, covers topics ranging from fractal analysis to very specific applications of the theory of dynamical systems to biology. This second volume contains mostly new applications of the theory of dynamical systems to both engineering and biology. The first volume is devoted to fundamental aspects and includes a number of important new contributions as well as some review articles that emphasize new development prospects. The topics addressed in the two volumes include a rigorous treatment of fluctuations in dynamical systems, topics in fractal analysis, studies of the transient dynamics in biological networks, synchronization in lasers, and control of chaotic systems, among others. This book also: · Develops applications of nonlinear dynamics on a diversity of topics such as patterns of synchrony in neuronal networks, laser synchronization, control of chaotic systems, and the study of transient dynamics in biological · Includes a study of self-organized regularity in long-range systems · Explains use of Levenstein's distance for measuring lexical evolution rates

Download or read book Recent Advances in Nonlinear Dynamics and Synchronization written by Kyandoghere Kyamakya and published by Springer. This book was released on 2017-07-25 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on modelling and simulation, control and optimization, signal processing, and forecasting in selected nonlinear dynamical systems, presenting both literature reviews and novel concepts. It develops analytical or numerical approaches, which are simple to use, robust, stable, flexible and universally applicable to the analysis of complex nonlinear dynamical systems. As such it addresses key challenges are addressed, e.g. efficient handling of time-varying dynamics, efficient design, faster numerical computations, robustness, stability and convergence of algorithms. The book provides a series of contributions discussing either the design or analysis of complex systems in sciences and engineering, and the concepts developed involve nonlinear dynamics, synchronization, optimization, machine learning, and forecasting. Both theoretical and practical aspects of diverse areas are investigated, specifically neurocomputing, transportation engineering, theoretical electrical engineering, signal processing, communications engineering, and computational intelligence. It is a valuable resource for students and researchers interested in nonlinear dynamics and synchronization with applications in selected areas.

Download or read book Modelling and Control of Dynamic Systems Using Gaussian Process Models written by Juš Kocijan and published by Springer. This book was released on 2015-11-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph opens up new horizons for engineers and researchers in academia and in industry dealing with or interested in new developments in the field of system identification and control. It emphasizes guidelines for working solutions and practical advice for their implementation rather than the theoretical background of Gaussian process (GP) models. The book demonstrates the potential of this recent development in probabilistic machine-learning methods and gives the reader an intuitive understanding of the topic. The current state of the art is treated along with possible future directions for research. Systems control design relies on mathematical models and these may be developed from measurement data. This process of system identification, when based on GP models, can play an integral part of control design in data-based control and its description as such is an essential aspect of the text. The background of GP regression is introduced first with system identification and incorporation of prior knowledge then leading into full-blown control. The book is illustrated by extensive use of examples, line drawings, and graphical presentation of computer-simulation results and plant measurements. The research results presented are applied in real-life case studies drawn from successful applications including: a gas–liquid separator control; urban-traffic signal modelling and reconstruction; and prediction of atmospheric ozone concentration. A MATLAB® toolbox, for identification and simulation of dynamic GP models is provided for download.

Download or read book Predictive Control for Linear and Hybrid Systems written by Francesco Borrelli and published by Cambridge University Press. This book was released on 2017-06-22 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control (MPC), the dominant advanced control approach in industry over the past twenty-five years, is presented comprehensively in this unique book. With a simple, unified approach, and with attention to real-time implementation, it covers predictive control theory including the stability, feasibility, and robustness of MPC controllers. The theory of explicit MPC, where the nonlinear optimal feedback controller can be calculated efficiently, is presented in the context of linear systems with linear constraints, switched linear systems, and, more generally, linear hybrid systems. Drawing upon years of practical experience and using numerous examples and illustrative applications, the authors discuss the techniques required to design predictive control laws, including algorithms for polyhedral manipulations, mathematical and multiparametric programming and how to validate the theoretical properties and to implement predictive control policies. The most important algorithms feature in an accompanying free online MATLAB toolbox, which allows easy access to sample solutions. Predictive Control for Linear and Hybrid Systems is an ideal reference for graduate, postgraduate and advanced control practitioners interested in theory and/or implementation aspects of predictive control.