Download or read book Recent Advances in Bioprocess Engineering and Bioreactor Design written by Swasti Dhagat and published by Springer Nature. This book was released on with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Bioprocess Engineering and Technology written by Doraiswami Ramkrishna and published by Springer Nature. This book was released on 2020-09-29 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select peer-reviewed proceedings of the International Conference on Advances in Bioprocess Engineering and Technology (ICABET 2020). The book covers all aspects of bioprocesses, especially related to fermentation technology, food technology, environmental biotechnology, and sustainable energy. Along with this primary theme, the focus is on recent advances in bioprocessing research such as biosensors, micro-reactors, novel separation techniques, bioprocess control, bio-safety, advanced techniques for waste to wealth generation, and nanobiotechnology. This contents are divided according to the major themes of the conference: (i) Fermentation Technology and Bioreactor, (ii) Food Pharmaceuticals and Health care, (iii) Environment and Agriculture, and (iv) Sustainable Energy. This book is intended to help students, researchers, and industry professionals acquire knowledge on innovative technologies and recent advancements in the field of bioprocess engineering and technology.
Download or read book Current Developments in Biotechnology and Bioengineering written by Ashok Pandey and published by Elsevier. This book was released on 2022-08-18 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Bioprocess Engineering, the latest release in the Current Developments in Biotechnology and Bioengineering series, provides a comprehensive overview of bioprocess systems, kinetics, bioreactor design, batch and continuous reactors and introduces key principles that enable bioprocess engineers to engage in analysis, optimization and design with consistent control over biological and chemical transformations. The bioprocessing sector is also updating its technologies with state-of-the art techniques to keep up with the rising demand of the industry and R&D. This book covers these aspects, taking readers through a step-by-step journey of bioprocessing while also guiding them towards a new era and future. - Covers state-of-the-art, technological advancements in the field of bioprocessing - Includes design and scale-up of bioreactors, monitoring and control systems, advances in upstream and downstream processing - Includes design and development of fermentation processes such as the suitability of experimental design, full factorial, central composite design, Box-Behnken, Plackett-Burman, and more
Download or read book Bioprocess Engineering written by Shijie Liu and published by Newnes. This book was released on 2012-11-21 with total page 1001 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess Engineering involves the design and development of equipment and processes for the manufacturing of products such as food, feed, pharmaceuticals, nutraceuticals, chemicals, and polymers and paper from biological materials. It also deals with studying various biotechnological processes. "Bioprocess Kinetics and Systems Engineering" first of its kind contains systematic and comprehensive content on bioprocess kinetics, bioprocess systems, sustainability and reaction engineering. Dr. Shijie Liu reviews the relevant fundamentals of chemical kinetics-including batch and continuous reactors, biochemistry, microbiology, molecular biology, reaction engineering, and bioprocess systems engineering- introducing key principles that enable bioprocess engineers to engage in the analysis, optimization, design and consistent control over biological and chemical transformations. The quantitative treatment of bioprocesses is the central theme of this book, while more advanced techniques and applications are covered with some depth. Many theoretical derivations and simplifications are used to demonstrate how empirical kinetic models are applicable to complicated bioprocess systems. - Contains extensive illustrative drawings which make the understanding of the subject easy - Contains worked examples of the various process parameters, their significance and their specific practical use - Provides the theory of bioprocess kinetics from simple concepts to complex metabolic pathways - Incorporates sustainability concepts into the various bioprocesses
Download or read book Current Developments in Biotechnology and Bioengineering written by Christian Larroche and published by Elsevier. This book was released on 2016-09-17 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Bioprocesses, Bioreactors and Controls provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends, reviewing industrial biotechnology and bioengineering practices that facilitate and enhance the transition of processes from lab to plant scale, which is becoming increasingly important as such transitions continue to grow in frequency. Focusing on industrial bioprocesses, bioreactors for bioprocesses, and controls for bioprocesses, this title reviews industrial practice to identify bottlenecks and propose solutions, highlighting that the optimal control of a bioprocess involves not only maximization of product yield, but also taking into account parameters such as quality assurance and environmental aspects. - Describes industrial bioprocesses based on the reaction media - Lists the type of bioreactors used for a specific bioprocess/application - Outlines the principles of control systems in various bioprocesses
Download or read book Current Developments in Biotechnology and Bioengineering written by Ashok Pandey and published by Elsevier. This book was released on 2016-09-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Food and Beverages Industry provides extensive coverage of new developments, state-of-the-art technologies, and potential future trends compiled from the latest ideas across the entire arena of biotechnology and bioengineering. This volume reviews current developments in the application of food biotechnology and engineering for food and beverage production. As there have been significant advances in the areas of food fermentation, processing, and beverage production, this title highlights the advances in specific transformation processes, including those used for alcoholic beverage and fermented food production. Taking a food process and engineering point-of-view, the book also aims to select important bioengineering principles, highlighting how they can be quantitatively applied in the food and beverages industry. - Contains comprehensive coverage of food and beverage production - Covers all types of fermentation processes and their application in various food products - Includes unique coverage of the biochemical processes involved in beverages production
Download or read book Advances in Bioprocess Engineering written by Enrique Galindo and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess engineering has played a key role in biotechnology, contributing towards bringing the exciting new discoveries of molecular and cellular biology into the applied sphere, and in maintaining established processes, some centuries-old, efficient and essential for today's industry. Novel developments and new application areas of biotechnology, along with increasing constraints in costs, product quality, regulatory and environmental considerations, have placed the biochemical engineer at the forefront of new challenges. This second volume of Advances in Bioprocess Engineering reflects precisely the multidisciplinary nature of the field, where new and traditional areas of application are nurtured by a better understanding of fundamental phenomena and by the utilization of novel techniques and methodologies. The chapters in this book were written by the invited speakers to the 2nd International Symposium on Bioprocess Engineering, Mazatlan, Mexico, September 1997.
Download or read book Putting Biotechnology to Work written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of the United States to sustain a dominant global position in biotechnology lies in maintaining its primacy in basic life-science research and developing a strong resource base for bioprocess engineering and bioproduct manufacturing. This book examines the status of bioprocessing and biotechnology in the United States; current bioprocess technology, products, and opportunities; and challenges of the future and what must be done to meet those challenges. It gives recommendations for action to provide suitable incentives to establish a national program in bioprocess-engineering research, development, education, and technology transfer.
Download or read book Advances in Bioprocess Engineering written by Enrique Galindo and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioprocess engineering plays a key role in the development and optimization of bioprocesses leading to the products of biotechnology. A survey of the state-of-the-art in this field is greatly needed. This work covers all the essential sub-areas and as such is required reading for scientists active in all the disciplines involved in bioprocess engineering. This review of basic and applied approaches is brought together by a broad international group of expert authors. The work is a reflection of the First International Symposium on Bioprocess Engineering, June 1994. However, it must be emphasized that the book cannot be perceived as a regular symposium proceedings volume: a strict peer-review process assures the readers of a high level of quality; more than a quarter of the work consists of invited contributions, while less than half of the spontaneously submitted manuscripts were accepted for publication. Advances in Bioprocess Engineering belongs among the indispensable set of instruments of today's researcher in this field.
Download or read book Bioreactor Engineering Research and Industrial Applications II written by Jie Bao and published by Springer. This book was released on 2015-11-26 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book review series presents current trends in modern biotechnology. The aim is to cover all aspects of this interdisciplinary technology where knowledge, methods and expertise are required from chemistry, biochemistry, microbiology, genetics, chemical engineering and computer science. Volumes are organized topically and provide a comprehensive discussion of developments in the respective field over the past 3-5 years. The series also discusses new discoveries and applications. Special volumes are dedicated to selected topics which focus on new biotechnological products and new processes for their synthesis and purification. In general, special volumes are edited by well-known guest editors. The series editor and publisher will however always be pleased to receive suggestions and supplementary information. Manuscripts are accepted in English.
Download or read book Bioreactors written by Goutam Saha and published by CRC Press. This book was released on 2017-12-01 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreactors: Animal Cell Culture Control for Bioprocess Engineering presents the design, fabrication, and control of a new type of bioreactor meant especially for animal cell line culture. The new bioreactor, called the "see-saw bioreactor," is ideal for the growth of cells with a sensitive membrane. The see-saw bioreactor derives its name from its principle of operation in which liquid columns in either limb of the reactor alternately go up and down. The working volume of the reactor is small, to within 15 L. However, it can easily be scaled up for large production in volume of cell mass in the drug and pharmaceutical industries. The authors describe the principle of operation of the see-saw bioreactor and how to automatically control the bioprocess. They discuss different control strategies as well as the thorough experimental research they conducted on this prototype bioreactor in which they applied a time delay control for yield maximization. To give you a complete understanding of the design and development of the see-saw bioreactor, the authors cover the mathematical model they use to describe the kinetics of fermentation, the genetic algorithms used for deriving the optimal time trajectories of the bioprocess variables, and the corresponding control inputs for maximizing the product yield. One chapter is devoted to the application of time delay control. Following a description of the bioreactor’s working setup in the laboratory, the authors sum up their investigation and define the future scope of work in terms of design, control, and software sensors.
Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists.This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems.* * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists* Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems* Comprehensive, single-authored* 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems* 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors* Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading* Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used* Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.
Download or read book Biochemical Engineering written by Douglas S. Clark and published by CRC Press. This book was released on 1997-02-14 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides comprehensive coverage of modern biochemical engineering, detailing the basic concepts underlying the behaviour of bioprocesses as well as advances in bioprocess and biochemical engineering science. It includes discussions of topics such as enzyme kinetics and biocatalysis, microbial growth and product formation, bioreactor design, transport in bioreactors, bioproduct recovery and bioprocess economics and design. A solutions manual is available to instructors only.
Download or read book Multiphase Bioreactor Design written by Joaquim M.S. Cabral and published by CRC Press. This book was released on 2001-09-20 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreaction engineering is fundamental to the optimization of biotechnological processes and the production of biochemicals by enzymes, microbial, plant and animal cells and higher organisms. A reference text for postgraduate students and researchers in biochemical engineering and bioreactor design, Multiphase Bioreactor Design describes the
Download or read book New Products and New Areas of Bioprocess Engineering written by and published by Springer Science & Business Media. This book was released on 2000-09-15 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioreactors written by Carl-Fredrik Mandenius and published by John Wiley & Sons. This book was released on 2016-02-16 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this expert handbook both the topics and contributors are selected so as to provide an authoritative view of possible applications for this new technology. The result is an up-to-date survey of current challenges and opportunities in the design and operation of bioreactors for high-value products in the biomedical and chemical industries. Combining theory and practice, the authors explain such leading-edge technologies as single-use bioreactors, bioreactor simulators, and soft sensor monitoring, and discuss novel applications, such as stem cell production, process development, and multi-product reactors, using case studies from academia as well as from industry. A final section addresses the latest trends, including culture media design and systems biotechnology, which are expected to have an increasing impact on bioreactor design. With its focus on cutting-edge technologies and discussions of future developments, this handbook will remain an invaluable reference for many years to come.
Download or read book Bioreactor System Design written by Juan A. Asenjo and published by CRC Press. This book was released on 1994-11-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the state-of-the-art techniques and methods involved in the design, operation, preparation and containment of bioreactor systems, taking into account the interrelated effects of variables associated with both upstream and downstream stages of the design process. The importance of the initial steps in the development of a bioprocess, such as strain and media selection, that have an overwhelming influence on all further operations, is emphasized.;This work is intended for biochemical, chemical and bioprocess engineers; biotechnologists; industrial biochemists; micro- and molecular biologists; food scientists; and upper-level undergraduate and graduate students in these disciplines.
