Download or read book International Conference on Recent Advances in Aerospace Actuation Systems and Components written by Institut national des sciences appliquées (Lyon). Département Génie industriel and published by . This book was released on 2001 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Aerospace Actuation Systems and Components written by Jean-Charles Maré and published by . This book was released on 2007 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Actuators 2 written by Jean-Charles Maré and published by John Wiley & Sons. This book was released on 2017-04-24 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in a series of volumes which cover the topic of aerospace actuators following a systems-based approach. This second volume brings an original, functional and architectural vision to more electric aerospace actuators. The aspects of signal (Signal-by-Wire) and power (Power-by-Wire) are treated from the point of view of needs, their evolution throughout history, and operational solutions that are in service or in development. This volume is based on an extensive bibliography, numerous supporting examples and orders of magnitude which refer to flight controls and landing gear for various aircraft (fixed or rotorwing, launchers) in commercial, private and military applications. The topics covered in this set of books constitute a significant source of information for individuals and engineers from a variety of disciplines, seeking to learn more about aerospace actuation systems and components.
Download or read book Aerospace Actuators 3 written by Jean-Charles Maré and published by John Wiley & Sons. This book was released on 2018-01-19 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third in a series dedicated to aerospace actuators. It uses the contributions of the first two volumes to conduct case studies on actuation for flight controls, landing gear and engines. The actuation systems are seen in several aspects: signal and power architectures, generation and distribution of hydraulic or mechanical power, control and reliability, and evolution towards more electrical systems. The first three chapters are dedicated to the European commercial airplanes that marked their era: Caravelle, Concorde, Airbus A320 and Airbus A380. The final chapter deals with the flight controls of the Boeing V-22 and AgustaWestland AW609 tiltrotor aircraft. These address concerns that also apply to electromechanical actuators, which should be fitted on more electrical aircraft in the future. The topics covered in this series of books constitute a significant source of information for individuals and engineers from a variety of disciplines, seeking to learn more about aerospace actuation systems and components.
Download or read book International Conference on Recent Advances in Aerospace Actuation Systems and Components written by Jean-Charles Maré and published by . This book was released on 2014 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Actuators 1 written by Jean-Charles Maré and published by John Wiley & Sons. This book was released on 2016-06-14 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of a series of volumes that cover the topic of aerospace actuators following a systems-based approach. This first volume provides general information on actuators and their reliability, and focuses on hydraulically supplied actuators. Emphasis is put on hydraulic power actuators as a technology that is used extensively for all aircraft, including newer aircraft. Currently, takeovers by major corporations of smaller companies in this field is threatening the expertise of aerospace hydraulics and has inevitably led to a loss of expertise. Further removal of hydraulics teaching in engineering degrees means there is a need to capitalize efforts in this field in order to move it forward as a means of providing safer, greener, cheaper and faster aerospace services. The topics covered in this set of books constitute a significant source of information for individuals and engineers seeking to learn more about aerospace hydraulics.
Download or read book Safety of Computer Architectures written by Jean-Louis Boulanger and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is currently quite easy for students or designers/engineers to find very general books on the various aspects of safety, reliability and dependability of computer system architectures, and partial treatments of the elements that comprise an effective system architecture. It is not so easy to find a single source reference for all these aspects of system design. However, the purpose of this book is to present, in a single volume, a full description of all the constraints (including legal contexts around performance, reliability norms, etc.) and examples of architectures from various fields of application, including: railways, aeronautics, space, automobile and industrial automation. The content of the book is drawn from the experience of numerous people who are deeply immersed in the design and delivery (from conception to test and validation), safety (analysis of safety: FMEA, HA, etc.) and evaluation of critical systems. The involvement of real world industrial applications is handled in such as a way as to avoid problems of confidentiality, and thus allows for the inclusion of new, useful information (photos, architecture plans/schematics, real examples).
Download or read book Electro Mechanical Actuators for the More Electric Aircraft written by Mirko Mazzoleni and published by Springer Nature. This book was released on 2021-01-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent results on fault diagnosis and condition monitoring of airborne electromechanical actuators, illustrating both algorithmic and hardware design solutions to enhance the reliability of onboard more electric aircraft. The book begins with an introduction to the current trends in the development of electrically powered actuation systems for aerospace applications. Practical examples are proposed to help present approaches to reliability, availability, maintainability and safety analysis of airborne equipment. The terminology and main strategies for fault diagnosis and condition monitoring are then reviewed. The core of the book focuses on the presentation of relevant case studies of fault diagnosis and monitoring design for airborne electromechanical actuators, using different techniques. The last part of the book is devoted to a summary of lessons learned and practical suggestions for the design of fault diagnosis solutions of complex airborne systems. The book is written with the idea of providing practical guidelines on the development of fault diagnosis and monitoring algorithms for airborne electromechanical actuators. It will be of interest to practitioners in aerospace, mechanical, electronic, reliability and systems engineering, as well as researchers and postgraduates interested in dynamical systems, automatic control and safety-critical systems. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Digital Avionics Handbook Third Edition written by Cary Spitzer and published by CRC Press. This book was released on 2014-09-03 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.
Download or read book Electric Flight Technology written by Ravi Rajamani and published by SAE International. This book was released on 2018-05-28 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environmental impact of hydrocarbon-burning aircraft is one of the main motivations for the move to electric propulsion in aerospace. Also, cars, buses, and trucks are incorporating electric or hybrid-electric propulsion systems, reducing the pressure on hydrocarbons and lowering the costs of electrical components. The economies of scale necessitated by the automotive industry will help contain costs in the aviation sector as well. The use of electric propulsion in airplanes is not a new phenomenon. However, it is only recently that it has taken off in a concrete manner with a viable commercial future. The Electric Flight Technology: Unfolding of a New Future reviews the history of this field, discusses the key underlying technologies, and describes how the future for these technologies will likely unfold, distinguishing between all-electric (AE) and hybrid-electric (HE) architectures. Written by Dr. Ravi Rajamani, it covers the essential information needed to understand this new technology wave taking hold in the aerospace industry. The Electric Flight Technology: Unfolding of a New Future covers fundamental topics such as: • The history of electric propulsion, including its evolution from using traditional electricity, to solar power to batteries as sources to sustain propulsion and flight. • The various architectures being considered for electric aircraft, specifically small general aviation (GA) aircraft and larger business jets; single-aisle commercial aircraft; and larger twin-aisle commercial aircraft. • The various systems and subsystems of an electric aircraft, along with how various subsystems in the vehicle can be integrated in a more optimal manner. In the future, the existing tube-and-wing configuration will not be the only available architecture; instead we will be more likely to find an architecture where the propulsion system is embedded within the airframe. • The future trends in this arena and what we can expect to see in the next decade or so.
Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.
Download or read book VIII International Scientific Siberian Transport Forum written by Zdenka Popovic and published by Springer Nature. This book was released on 2020-01-04 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of scientific studies on the successful operation of complex transport infrastructures in regions with extreme climatic and geographical conditions. It features the proceedings of the VIII International Scientific Siberian Transport Forum, TransSiberia 2019, which was held in Novosibirsk, Russia, on May 22–27, 2019. The book discusses improving energy efficiency in the transportation sector and the use of artificial intelligence in transport, highlighting a range of topics, such as freight and logistics, freeway traffic modelling and control, intelligent transport systems and smart mobility, transport data and transport models, highway and railway construction and trucking on the Siberian ice roads. Consisting of 214 high-quality papers on a wide range of issues, these proceedings appeal to scientists, engineers, managers in the transport sector, and anyone involved in the construction and operation of transport infrastructure facilities.
Download or read book New Sensors and Processing Chain written by Jean-Hugh Thomas and published by John Wiley & Sons. This book was released on 2014-10-13 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A vital tool for researchers, engineers, and students, New Sensors and Processing Chain focuses on the processing chain to set up in order to extract relevant information on various systems. Highlighting the design of new microsensors and various applications, the authors present recent progress in instrumentation and microsystem design, providing insight to the modification of the sensor itself as well as its environment. Various applications illustrate the presentations, which show how a processing chain is organized from the data acquired by a specific sensor.
Download or read book Fundamentals of Electric Aircraft written by Pascal Thalin and published by SAE International. This book was released on 2018-12-18 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Electric Aircraft was developed to explain what the electric aircraft stands for by offering an objective view of what can be expected from the giant strides in innovative architectures and technologies enabling aircraft electrification. Through tangible case studies, a deep insight is provided into this paradigm shift cutting across various aircraft segments – from General Aviation to Large Aircraft. Addressing design constraints and timelines foreseen to reach acceptable performance and maturity levels, Fundamentals of Electric Aircraft puts forward a general view of the progress made to date and what to expect in the years to come. Drawing from the expertise of four industry veterans, Pascal Thalin (editor), Ravi Rajamani, Jean-Charles Mare and Sven Taubert (contributors), it addresses futuristic approaches but does not depart too far from the operational down-to-earth realities of everyday business. Fundamentals of Electric Aircraft also offers analyses on how performance enhancements and fuel burn savings may bring more value for money as long as new electric technologies deliver on their promises.
Download or read book Automated Low Altitude Air Delivery written by Johann C. Dauer and published by Springer Nature. This book was released on 2021-11-02 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates Unmanned Aircraft Systems (UAS) with a payload capacity of one metric ton for transportation. The authors provide a large variety of perspectives–from economics to technical realization. With the focus on such heavy-lift cargo UAS, the authors consider recently established methods for approval and certification, which they expect to be disruptive for unmanned aviation. In particular, the Specific Operations Risk Assessment (SORA) and its impact on the presented technological solutions and operational concepts are studied. Starting with the assumption of an operation over sparsely populated areas and below common air traffic, diverse measures to further reduce operational risks are proposed. Operational concepts derived from logistics use-cases set the context for an in-depth analysis including aircraft and system design, safe autonomy as well as airspace integration and datalinks. Results from simulations and technology demonstrations are presented as a proof of concept for solutions proposed in this book.
Download or read book Recent Advances in Mechatronics written by Tomas Brezina and published by Springer Science & Business Media. This book was released on 2009-11-29 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a synergic discipline integrating precise mechanics, electrotechnics, electronics and IT technologies. The main goal of mechatronical approach to design of complex products is to achieve new quality of their utility value at reasonable price. Successful accomplishment of this task would not be possible without application of advanced software and hardware tools for simulation of design, technologies and production control and also for simulation of behavior of these products in order to provide the highest possible level of spatial and functional integration of the final product. This book brings a review of the current state of the art in mechatronics, as presented at the 8th International Conference Mechatronics 2009, organized by the Brno Technical University, Faculty of Mechanical Engineering, Czech Republic. The specific topics of the conference are Modelling and Simulation, Metrology & Diagnostics, Sensorics & Photonics, Control & Robotics, MEMS Design & Mechatronic Products, Production Machines and Biomechanics. The selected contributions provide an insight into the current development of these scientific disciplines, present the new results of research and development and indicate the trends of development in the interdisciplinary field of mechatronic systems. Therefore, the book provides the latest and helpful information both for the R&D specialists and for the designers working in mechatronics and related fields.
Download or read book Simulation of Fluid Power Systems with Simcenter Amesim written by Nicolae Vasiliu and published by CRC Press. This book was released on 2018-04-09 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates numerical simulation of fluid power systems by LMS Amesim Platform covering hydrostatic transmissions, electro hydraulic servo valves, hydraulic servomechanisms for aerospace engineering, speed governors for power machines, fuel injection systems, and automotive servo systems It includes hydrostatic transmissions, automotive fuel injection, hydropower speed units governor, aerospace servo systems along with case studies of specified companies Aids in predicting and optimizing the static and dynamic performances related to the systems under study
