Download or read book ESD written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic discharge (ESD) continues to impact semiconductor components and systems as technologies scale from micro- to nano-electronics. This book studies electrical overstress, ESD, and latchup from a whole-chip ESD design synthesis approach. It provides a clear insight into the integration of ESD protection networks from a generalist perspective, followed by examples in specific technologies, circuits, and chips. Uniquely both the semiconductor chip integration issues and floorplanning of ESD networks are covered from a ‘top-down' design approach. Look inside for extensive coverage on: integration of cores, power bussing, and signal pins in DRAM, SRAM, CMOS image processing chips, microprocessors, analog products, RF components and how the integration influences ESD design and integration architecturing of mixed voltage, mixed signal, to RF design for ESD analysis floorplanning for peripheral and core I/O designs, and the implications on ESD and latchup guard ring integration for both a ‘bottom-up' and ‘top-down' methodology addressing I/O guard rings, ESD guard rings, I/O to I/O, and I/O to core classification of ESD power clamps and ESD signal pin circuitry, and how to make the correct choice for a given semiconductor chip examples of ESD design for the state-of-the-art technologies discussed, including CMOS, BiCMOS, silicon on insulator (SOI), bipolar technology, high voltage CMOS (HVCMOS), RF CMOS, and smart power practical methods for the understanding of ESD circuit power distribution, ground rule development, internal bus distribution, current path analysis, quality metrics ESD: Design and Synthesis is a continuation of the author's series of books on ESD protection. It is an essential reference for: ESD, circuit, and semiconductor engineers; design synthesis team leaders; layout design, characterisation, floorplanning, test and reliability engineers; technicians; and groundrule and test site developers in the manufacturing and design of semiconductor chips. It is also useful for graduate and undergraduate students in electrical engineering, semiconductor sciences, and manufacturing sciences, and on courses involving the design of ESD devices, chips and systems. This book offers a useful insight into the issues that confront modern technology as we enter the nano-electronic era.
Download or read book Wafer Bonding written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2004-05-14 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade direct wafer bonding has developed into a mature materials integration technology. This book presents state-of-the-art reviews of the most important applications of wafer bonding written by experts from industry and academia. The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.
Download or read book Low Power Digital CMOS Design written by Anantha P. Chandrakasan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power consumption has become a major design consideration for battery-operated, portable systems as well as high-performance, desktop systems. Strict limitations on power dissipation must be met by the designer while still meeting ever higher computational requirements. A comprehensive approach is thus required at all levels of system design, ranging from algorithms and architectures to the logic styles and the underlying technology. Potentially one of the most important techniques involves combining architecture optimization with voltage scaling, allowing a trade-off between silicon area and low-power operation. Architectural optimization enables supply voltages of the order of 1 V using standard CMOS technology. Several techniques can also be used to minimize the switched capacitance, including representation, optimizing signal correlations, minimizing spurious transitions, optimizing sequencing of operations, activity-driven power down, etc. The high- efficiency of DC-DC converter circuitry required for efficient, low-voltage and low-current level operation is described by Stratakos, Sullivan and Sanders. The application of various low-power techniques to a chip set for multimedia applications shows that orders-of-magnitude reduction in power consumption is possible. The book also features an analysis by Professor Meindl of the fundamental limits of power consumption achievable at all levels of the design hierarchy. Svensson, of ISI, describes emerging adiabatic switching techniques that can break the CV2f barrier and reduce the energy per computation at a fixed voltage. Srivastava, of AT&T, presents the application of aggressive shut-down techniques to microprocessor applications.
Download or read book Semiconductor Radiation Detectors written by Gerhard Lutz and published by Springer. This book was released on 2007-06-15 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from basic principles, this book describes the rapidly growing field of modern semiconductor detectors used for energy and position measurement radiation. The author, whose own contributions to these developments have been significant, explains the working principles of semiconductor radiation detectors in an intuitive way. Broad coverage is also given to electronic signal readout and to the subject of radiation damage.
Download or read book Microelectronic Systems written by Albert Heuberger and published by Springer Science & Business Media. This book was released on 2011-12-26 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to Prof. Dr. Heinz Gerhäuser on the occasion of his retirement both from the position of Executive Director of the Fraunhofer Institute for Integrated Circuits IIS and from the Endowed Chair of Information Technologies with a Focus on Communication Electronics (LIKE) at the Friedrich-Alexander-Universität Erlangen-Nürnberg. Heinz Gerhäuser's vision and entrepreneurial spirit have made the Fraunhofer IIS one of the most successful and renowned German research institutions. He has been Director of the Fraunhofer IIS since 1993, and under his leadership it has grown to become the largest of Germany's 60 Fraunhofer Institutes, a position it retains to this day, currently employing over 730 staff. Likely his most important scientific as well as application-related contribution was his pivotal role in the development of the mp3 format, which would later become a worldwide success. The contributions to this Festschrift were written by both Fraunhofer IIS staff and external project team members in appreciation of Prof. Dr. Gerhäuser's lifetime academic achievements and his inspiring leadership at the Fraunhofer IIS. The papers reflect the broad spectrum of the institute's research activities and are grouped into sections on circuits, information systems, visual computing, and audio and multimedia. They provide academic and industrial researchers in fields like signal processing, sensor networks, microelectronics, and integrated circuits with an up-to-date overview of research results that have a huge potential for cutting-edge industrial applications.
Download or read book High Frequency Bipolar Transistors written by Michael Reisch and published by Springer Science & Business Media. This book was released on 2003-03-05 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This modern book-length treatment gives a detailed presentation of high-frequency bipolar transistors in silicon or silicon-germanium technology, with particular emphasis placed on today's advanced compact models and their physical foundations.
Download or read book Logic Synthesis for Asynchronous Controllers and Interfaces written by J. Cortadella and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a long friendship, of a broad international co operation, and of a bold dream. It is the summary of work carried out by the authors, and several other wonderful people, during more than 15 years, across 3 continents, in the course of countless meetings, workshops and discus sions. It shows that neither language nor distance can be an obstacle to close scientific cooperation, when there is unity of goals and true collaboration. When we started, we had very different approaches to handling the mys terious, almost magical world of asynchronous circuits. Some were more theo retical, some were closer to physical reality, some were driven mostly by design needs. In the end, we all shared the same belief that true Electronic Design Automation research must be solidly grounded in formal models, practically minded to avoid excessive complexity, and tested "in the field" in the form of experimental tools. The results are this book, and the CAD tool petrify. The latter can be downloaded and tried by anybody bold (or desperate) enough to tread into the clockless (but not lawless) domain of small-scale asynchronicity. The URL is http://www.lsi. upc. esr j ordic/petrify. We believe that asynchronous circuits are a wonderful object, that aban dons some of the almost militaristic law and order that governs synchronous circuits, to improve in terms of simplicity, energy efficiency and performance.
Download or read book Automotive Mechatronics written by Konrad Reif and published by Springer. This book was released on 2014-08-25 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of automotive vehicles increases this book presents operational and practical issues of automotive mechatronics. It is a comprehensive introduction to controlled automotive systems and provides detailed information of sensors for travel, angle, engine speed, vehicle speed, acceleration, pressure, temperature, flow, gas concentration etc. The measurement principles of the different sensor groups are explained and examples to show the measurement principles applied in different types.
Download or read book Proceedings of International Conference on Advances in Computing written by Aswatha Kumar M. and published by Springer Science & Business Media. This book was released on 2012-09-03 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first International Conference on Advances in Computing (ICAdC-2012). The scope of the conference includes all the areas of New Theoretical Computer Science, Systems and Software, and Intelligent systems. Conference Proceedings is a culmination of research results, papers and the theory related to all the three major areas of computing mentioned above. Helps budding researchers, graduates in the areas of Computer Science, Information Science, Electronics, Telecommunication, Instrumentation, Networking to take forward their research work based on the reviewed results in the paper by mutual interaction through e-mail contacts in the proceedings.
Download or read book Low Power Design Methodologies written by Jan M. Rabaey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Power Design Methodologies presents the first in-depth coverage of all the layers of the design hierarchy, ranging from the technology, circuit, logic and architectural levels, up to the system layer. The book gives insight into the mechanisms of power dissipation in digital circuits and presents state of the art approaches to power reduction. Finally, it introduces a global view of low power design methodologies and how these are being captured in the latest design automation environments. The individual chapters are written by the leading researchers in the area, drawn from both industry and academia. Extensive references are included at the end of each chapter. Audience: A broad introduction for anyone interested in low power design. Can also be used as a text book for an advanced graduate class. A starting point for any aspiring researcher.
Download or read book Integrated Silicon Optoelectronics written by Horst Zimmermann and published by Springer. This book was released on 2009-10-03 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Silicon Optoelectronics synthesizes topics from optoelectronics and microelectronics. The book concentrates on silicon as the major base of modern semiconductor devices and circuits. Starting from the basics of optical emission and absorption, as well as from the device physics of photodetectors, the aspects of the integration of photodetectors in modern bipolar, CMOS, and BiCMOS technologies are discussed. Detailed descriptions of fabrication technologies and applications of optoelectronic integrated circuits are included. The book, furthermore, contains a review of the newest state of research on eagerly anticipated silicon light emitters. In order to cover the topics comprehensively, also included are integrated waveguides, gratings, and optoelectronic power devices. Numerous elaborate illustrations facilitate and enhance comprehension. This extended edition will be of value to engineers, physicists, and scientists in industry and at universities. The book is also recommended to graduate students specializing on microelectronics or optoelectronics.
Download or read book Electromagnetics and Network Theory and their Microwave Technology Applications written by Stefan Lindenmeier and published by Springer Science & Business Media. This book was released on 2011-07-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a discussion of the challenges and perspectives of electromagnetics and network theory and their microwave applications in all aspects. It collects the most interesting contribution of the symposium dedicated to Professor Peter Russer held in October 2009 in Munich.
Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.
Download or read book Electronic Circuits written by Ulrich Tietze and published by Springer. This book was released on 2015-12-09 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Circuits covers all important aspects and applications of modern analog and digital circuit design. The basics, such as analog and digital circuits, on operational amplifiers, combinatorial and sequential logic and memories, are treated in Part I, while Part II deals with applications. Each chapter offers solutions that enable the reader to understand ready-made circuits or to proceed quickly from an idea to a working circuit, and always illustrated by an example. Analog applications cover such topics as analog computing circuits. The digital sections deal with AD and DA conversion, digital computing circuits, microprocessors and digital filters. This editions contains the basic electronics for mobile communications. The accompanying CD-ROM contains PSPICE software, an analog-circuit-simulation package, plus simulation examples and model libraries related to the book topics.
Download or read book Reliability Engineering written by Alessandro Birolini and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using clear language, this book shows you how to build in, evaluate, and demonstrate reliability and availability of components, equipment, and systems. It presents the state of the art in theory and practice, and is based on the author's 30 years' experience, half in industry and half as professor of reliability engineering at the ETH, Zurich. In this extended edition, new models and considerations have been added for reliability data analysis and fault tolerant reconfigurable repairable systems including reward and frequency / duration aspects. New design rules for imperfect switching, incomplete coverage, items with more than 2 states, and phased-mission systems, as well as a Monte Carlo approach useful for rare events are given. Trends in quality management are outlined. Methods and tools are given in such a way that they can be tailored to cover different reliability requirement levels and be used to investigate safety as well. The book contains a large number of tables, figures, and examples to support the practical aspects.
Download or read book Design and Realization of Bipolar Transistors written by Peter Ashburn and published by . This book was released on 1988-08-18 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses new developments in the design and fabrication of bipolar transistors for high-speed digital circuits. Covers advances in silicon technology (such as polysilicon emitters and self-aligned fabrication techniques), gallium arsenide technology (such as extremely high-performance MSI circuits resulting from the development of GaAs/GaAlAs heterojunctions), and new applications of bipolar transistors (such as optoelectronic circuits). Also deals with optimization of bipolar devices and processes for high-speed, digital circuits by means of a quasi-analytical expression for the gate delay of an ECL logic gate. Includes case studies.
Download or read book Ion Implantation and Synthesis of Materials written by Michael Nastasi and published by Springer Science & Business Media. This book was released on 2007-05-16 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion implantation is one of the key processing steps in silicon integrated circuit technology. Some integrated circuits require up to 17 implantation steps and circuits are seldom processed with less than 10 implantation steps. Controlled doping at controlled depths is an essential feature of implantation. Ion beam processing can also be used to improve corrosion resistance, to harden surfaces, to reduce wear and, in general, to improve materials properties. This book presents the physics and materials science of ion implantation and ion beam modification of materials. It covers ion-solid interactions used to predict ion ranges, ion straggling and lattice disorder. Also treated are shallow-junction formation and slicing silicon with hydrogen ion beams. Topics important for materials modification, such as ion-beam mixing, stresses, and sputtering, are also described.