Download or read book Real Time Software Design for Embedded Systems written by Hassan Gomaa and published by Cambridge University Press. This book was released on 2016-05-26 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized as an introduction followed by several self-contained chapters, this tutorial takes the reader from use cases to complete architectures for real-time embedded systems using SysML, UML, and MARTE and shows how to apply the COMET/RTE design method to real-world problems. --

Download or read book Real Time Embedded Systems written by Xiaocong Fan and published by Newnes. This book was released on 2015-02-25 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book integrates new ideas and topics from real time systems, embedded systems, and software engineering to give a complete picture of the whole process of developing software for real-time embedded applications. You will not only gain a thorough understanding of concepts related to microprocessors, interrupts, and system boot process, appreciating the importance of real-time modeling and scheduling, but you will also learn software engineering practices such as model documentation, model analysis, design patterns, and standard conformance.This book is split into four parts to help you learn the key concept of embedded systems; Part one introduces the development process, and includes two chapters on microprocessors and interrupts---fundamental topics for software engineers; Part two is dedicated to modeling techniques for real-time systems; Part three looks at the design of software architectures and Part four covers software implementations, with a focus on POSIX-compliant operating systems.With this book you will learn:The pros and cons of different architectures for embedded systems POSIX real-time extensions, and how to develop POSIX-compliant real time applications How to use real-time UML to document system designs with timing constraintsThe challenges and concepts related to cross-development Multitasking design and inter-task communication techniques (shared memory objects, message queues, pipes, signals)How to use kernel objects (e.g. Semaphores, Mutex, Condition variables) to address resource sharing issues in RTOS applications The philosophy underpinning the notion of "resource manager" and how to implement a virtual file system using a resource manager The key principles of real-time scheduling and several key algorithms - Coverage of the latest UML standard (UML 2.4) - Over 20 design patterns which represent the best practices for reuse in a wide range of real-time embedded systems - Example codes which have been tested in QNX---a real-time operating system widely adopted in industry

Download or read book Real Time Embedded Systems written by Jiacun Wang and published by John Wiley & Sons. This book was released on 2017-07-10 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering comprehensive coverage of the convergence of real-time embedded systems scheduling, resource access control, software design and development, and high-level system modeling, analysis and verification Following an introductory overview, Dr. Wang delves into the specifics of hardware components, including processors, memory, I/O devices and architectures, communication structures, peripherals, and characteristics of real-time operating systems. Later chapters are dedicated to real-time task scheduling algorithms and resource access control policies, as well as priority-inversion control and deadlock avoidance. Concurrent system programming and POSIX programming for real-time systems are covered, as are finite state machines and Time Petri nets. Of special interest to software engineers will be the chapter devoted to model checking, in which the author discusses temporal logic and the NuSMV model checking tool, as well as a chapter treating real-time software design with UML. The final portion of the book explores practical issues of software reliability, aging, rejuvenation, security, safety, and power management. In addition, the book: Explains real-time embedded software modeling and design with finite state machines, Petri nets, and UML, and real-time constraints verification with the model checking tool, NuSMV Features real-world examples in finite state machines, model checking, real-time system design with UML, and more Covers embedded computer programing, designing for reliability, and designing for safety Explains how to make engineering trade-offs of power use and performance Investigates practical issues concerning software reliability, aging, rejuvenation, security, and power management Real-Time Embedded Systems is a valuable resource for those responsible for real-time and embedded software design, development, and management. It is also an excellent textbook for graduate courses in computer engineering, computer science, information technology, and software engineering on embedded and real-time software systems, and for undergraduate computer and software engineering courses.

Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Software Design for Real time Systems written by J. E. Cooling and published by Springer. This book was released on 2013-11-11 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: WHAT IS THIS BOOKABOUT7 In recent times real-time computer systems have become increasingly complex and sophisticated. It has now become apparent that, to implement such schemes effectively, professional, rigorous software methods must be used. This includes analysis, design and implementation. Unfortunately few textbooks cover this area well. Frequently they are hardware oriented with limited coverage of software, or software texts which ignore the issues of real-time systems. This book aims to fill that gap by describing the total software design and is given development process for real-time systems. Further, special emphasis of microprocessor-based real-time embedded systems. to the needs WHAT ARE REAL-TIME COMPUTER SYSTEMS? Real-time systems are those which must produce correct responses within a definite time limit. Should computer responses exceed these time bounds then performance degradation and/or malfunction results. WHAT ARE REAL-TIME EMBEDDED COMPUTER SYSTEMS? Here the computer is merely one functional element within a real-time system; it is not a computing machine in its own right. WHO SHOULD READ THIS BOOK? Those involved, or who intend to get involved, in the design of software for real-time systems. It is written with both software and hardware engineers in mind, being suitable for students and professional engineers.

Download or read book Real Time UML Workshop for Embedded Systems written by Bruce Powel Douglass and published by Elsevier. This book was released on 2011-04-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical new book provides much-needed, practical, hands-on experience capturing analysis and design in UML. It holds the hands of engineers making the difficult leap from developing in C to the higher-level and more robust Unified Modeling Language, thereby supporting professional development for engineers looking to broaden their skill-sets in order to become more saleable in the job market. It provides a laboratory environment through a series of progressively more complex exercises that act as building blocks, illustrating the various aspects of UML and its application to real-time and embedded systems. With its focus on gaining proficiency, it goes a significant step beyond basic UML overviews, providing both comprehensive methodology and the best level of supporting exercises available on the market. Each exercise has a matching solution which is thoroughly explained step-by-step in the back of the book. The techniques used to solve these problems come from the author's decades of experience designing and constructing real-time systems. After the exercises have been successfully completed, the book will act as a desk reference for engineers, reminding them of how many of the problems they face in their designs can be solved. - Tutorial style text with keen focus on in-depth presentation and solution of real-world example problems - Highly popular, respected and experienced author

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Design Patterns for Embedded Systems in C written by Bruce Powel Douglass and published by Elsevier. This book was released on 2010-11-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent survey stated that 52% of embedded projects are late by 4-5 months. This book can help get those projects in on-time with design patterns. The author carefully takes into account the special concerns found in designing and developing embedded applications specifically concurrency, communication, speed, and memory usage. Patterns are given in UML (Unified Modeling Language) with examples including ANSI C for direct and practical application to C code. A basic C knowledge is a prerequisite for the book while UML notation and terminology is included. General C programming books do not include discussion of the contraints found within embedded system design. The practical examples give the reader an understanding of the use of UML and OO (Object Oriented) designs in a resource-limited environment. Also included are two chapters on state machines. The beauty of this book is that it can help you today. . - Design Patterns within these pages are immediately applicable to your project - Addresses embedded system design concerns such as concurrency, communication, and memory usage - Examples contain ANSI C for ease of use with C programming code

Download or read book Real Time Embedded Components and Systems with Linux and RTOS written by Sam Siewert and published by Mercury Learning and Information. This book was released on 2015-12-29 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide a senior undergraduate or graduate student in electrical engineering or computer science with a balance of fundamental theory, review of industry practice, and hands-on experience to prepare for a career in the real-time embedded system industries. It is also intended to provide the practicing engineer with the necessary background to apply real-time theory to the design of embedded components and systems. Typical industries include aerospace, medical diagnostic and therapeutic systems, telecommunications, automotive, robotics, industrial process control, media systems, computer gaming, and electronic entertainment, as well as multimedia applications for general-purpose computing. This updated edition adds three new chapters focused on key technology advancements in embedded systems and with wider coverage of real-time architectures. The overall focus remains the RTOS (Real-Time Operating System), but use of Linux for soft real-time, hybrid FPGA (Field Programmable Gate Array) architectures and advancements in multi-core system-on-chip (SoC), as well as software strategies for asymmetric and symmetric multiprocessing (AMP and SMP) relevant to real-time embedded systems, have been added. Companion files are provided with numerous project videos, resources, applications, and figures from the book. Instructors’ resources are available upon adoption. FEATURES: • Provides a comprehensive, up to date, and accessible presentation of embedded systems without sacrificing theoretical foundations • Features the RTOS (Real-Time Operating System), but use of Linux for soft real-time, hybrid FPGA architectures and advancements in multi-core system-on-chip is included • Discusses an overview of RTOS advancements, including AMP and SMP configurations, with a discussion of future directions for RTOS use in multi-core architectures, such as SoC • Detailed applications coverage including robotics, computer vision, and continuous media • Includes a companion disc (4GB) with numerous videos, resources, projects, examples, and figures from the book • Provides several instructors’ resources, including lecture notes, Microsoft PP slides, etc.

Download or read book Real Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl

Download or read book UML for Real written by Luciano Lavagno and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of most real-time and embedded systems often exceeds that of other types of systems since, in addition to the usual spectrum of problems inherent in software, they need to deal with the complexities of the physical world. That world—as the proverbial Mr. Murphy tells us—is an unpredictable and often unfriendly place. Consequently, there is a very strong motivation to investigate and apply advanced design methods and technologies that could simplify and improve the reliability of real-time software design and implementation. As a result, from the first versions of UML issued in the mid 1990’s, designers of embedded and real-time systems have taken to UML with vigour and enthusiasm. However, the dream of a complete, model-driven design flow from specification through automated, optimised code generation, has been difficult to realise without some key improvements in UML semantics and syntax, specifically targeted to the real-time systems problem. With the enhancements in UML that have been proposed and are near standardisation with UML 2. 0, many of these improvements have been made. In the Spring of 2003, adoption of a formalised UML 2. 0 specification by the members of the Object Management Group (OMG) seems very close. It is therefore very appropriate to review the status of UML as a set of notations for embedded real-time systems - both the state of the art and best practices achieved up to this time with UML of previous generations - and where the changes embodied in the 2.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Performance Analysis of Real Time Embedded Software written by Yau-Tsun Steven Li and published by Springer Science & Business Media. This book was released on 1999 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are characterized by the presence of processors running application-specific software. Recent years have seen a large growth of such systems, and this trend is projected to continue with the growth of systems on a chip. Many of these systems have strict performance and cost requirements. To design these systems, sophisticated timing analysis tools are needed to accurately determine the extreme case (best case and worst case) performance of the software components. Existing techniques for this analysis have one or more of the following limitations: they cannot model complicated programs they cannot model advanced micro-architectural features of the processor, such as cache memories and pipelines they cannot be easily retargeted for new hardware platforms. In Performance Analysis of Real-Time Embedded Software, a new timing analysis technique is presented to overcome the above limitations. The technique determines the bounds on the extreme case (best case and worst case) execution time of a program when running on a given hardware system. It partitions the problem into two sub-problems: program path analysis and microarchitecture modeling. Performance Analysis of Real-Time Embedded Software will be of interest to Design Automation professionals as well as designers of circuits and systems.

Download or read book DSP Software Development Techniques for Embedded and Real Time Systems written by Robert Oshana and published by Elsevier. This book was released on 2006-01-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's embedded and real-time systems contain a mix of processor types: off-the-shelf microcontrollers, digital signal processors (DSPs), and custom processors. The decreasing cost of DSPs has made these sophisticated chips very attractive for a number of embedded and real-time applications, including automotive, telecommunications, medical imaging, and many others—including even some games and home appliances. However, developing embedded and real-time DSP applications is a complex task influenced by many parameters and issues. DSP Software Development Techniques for Embedded and Real-Time Systems is an introduction to DSP software development for embedded and real-time developers giving details on how to use digital signal processors efficiently in embedded and real-time systems. The book covers software and firmware design principles, from processor architectures and basic theory to the selection of appropriate languages and basic algorithms. The reader will find practical guidelines, diagrammed techniques, tool descriptions, and code templates for developing and optimizing DSP software and firmware. The book also covers integrating and testing DSP systems as well as managing the DSP development effort. - Digital signal processors (DSPs) are the future of microchips! - Includes practical guidelines, diagrammed techniques, tool descriptions, and code templates to aid in the development and optimization of DSP software and firmware

Download or read book Real Time Software Design for Embedded Systems written by Hassan Gomaa and published by Cambridge University Press. This book was released on 2016-05-26 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial reference takes the reader from use cases to complete architectures for real-time embedded systems using SysML, UML, and MARTE and shows how to apply the COMET/RTE design method to real-world problems. The author covers key topics such as architectural patterns for distributed and hierarchical real-time control and other real-time software architectures, performance analysis of real-time designs using real-time scheduling, and timing analysis on single and multiple processor systems. Complete case studies illustrating design issues include a light rail control system, a microwave oven control system, and an automated highway toll system. Organized as an introduction followed by several self-contained chapters, the book is perfect for experienced software engineers wanting a quick reference at each stage of the analysis, design, and development of large-scale real-time embedded systems, as well as for advanced undergraduate or graduate courses in software engineering, computer engineering, and software design.

Download or read book Embedded and Real Time Operating Systems written by K.C. Wang and published by Springer. This book was released on 2017-03-21 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic concepts and principles of operating systems, showing how to apply them to the design and implementation of complete operating systems for embedded and real-time systems. It includes all the foundational and background information on ARM architecture, ARM instructions and programming, toolchain for developing programs, virtual machines for software implementation and testing, program execution image, function call conventions, run-time stack usage and link C programs with assembly code. It describes the design and implementation of a complete OS for embedded systems in incremental steps, explaining the design principles and implementation techniques. For Symmetric Multiprocessing (SMP) embedded systems, the author examines the ARM MPcore processors, which include the SCU and GIC for interrupts routing and interprocessor communication and synchronization by Software Generated Interrupts (SGIs).Throughout the book, complete working sample systems demonstrate the design principles and implementation techniques. The content is suitable for advanced-level and graduate students working in software engineering, programming, and systems theory.