Download or read book Real time Model Based Relay for Transmission Line Protection Using Alternative Architectures of Hardware software written by David Felipe Celeita Rodríguez and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of protective relaying has led to a significant development of numerical relays capable of setting multiple functions. The need to coordinate each relay with other protective equipment has introduced complex communication schemes, and the vast number of parameters could lead to trip errors. The purpose of this research is to examine the background of power systems protection in transmission lines to identify the new trends in the grids of the future. The work is organized in 4 different layers that aim to integrate certain priorities into the proposal: (1) individual relay study, (2) future power system automation, (3) testing environments and (4) standardization. The proposal takes advantage of real-time hardware and software co-simulation to integrate a recursive least-square adaptive filter into a relay design for transmission line protection. The idea is highly motivated in the recent generation defined as setting-less protection, which works with model-based algorithms and minimizes the number of settings...
Download or read book Ratschlag betreffend Leistung eines Beitrages des Kantons Basel Stadt an die Pestalozzi Stiftung f r die F rderung der Ausbildung Jugendlicher aus schweizerischen Berggegenden written by and published by . This book was released on 1962 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Testing of an Instantaneous Overcurrent Relay Using VTB and VTB RT written by Daxe Patel and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the application of the Virtual Test Bed (VTB) and its real-time extension, VTB-RT, for protective relay modeling, simulation, and testing. An instantaneous overcurrent relay model was developed in VTB for a transmission line protection. The same relay model was built in Matlab/Simulink for validation purposes. Both models were tested for various fault conditions on a radial power system and results were compared. Moreover, a low cost real-time Hardware-In-the-Loop (HIL) simulation platform was implemented for relay model testing using VTB-RT and public domain software packages such as Real-Time Application Interface (RTAI), Comedi, and Comedilib, and notebook computer hardware. The applicability of VTB-RT was verified through an open-loop simulation and a HIL simulation of a simple dynamic system using dSPACE as the control hardware and NI DAQCard-6062E as the input/output interface. Simulation results are presented showing the effectiveness of the VTB-RT platform for model testing.
Download or read book Real Time Modeling Simulation and Validation of Protective Relays written by Ankush Saran and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The protection system plays an important role in the power system to detect the fault, isolate the faulted zone and restore the power supply to the healthy part. Terrestrial power systems (TPS) as well as shipboard power system (SPS) test cases are developed to conduct hardware in the loop (HIL) and the software in the loop (SIL) test using commercial relays and a Real Time Digital Simulator (RTDS). The comparison of the HIL and SIL simulation results were used to validate the develop software overcurrent relay model. This research work is further extended to implement multiple relay operation and coordination tests on the SPS and TPS using multiple commercial hardware overcurrent relays as well as multiple software relay models. In addition to modeling overcurrent relay, a differential relay was also modeled using LabVIEW. The relay model was tested for different types of fault conditions.
Download or read book IEEE Transmission and Distribution Conference and Exposition written by and published by . This book was released on 1991 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science Abstracts written by and published by . This book was released on 1993 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1990 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"
Download or read book Computer Organization and Design RISC V Edition written by David A. Patterson and published by Morgan Kaufmann. This book was released on 2017-05-12 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new RISC-V Edition of Computer Organization and Design features the RISC-V open source instruction set architecture, the first open source architecture designed to be used in modern computing environments such as cloud computing, mobile devices, and other embedded systems. With the post-PC era now upon us, Computer Organization and Design moves forward to explore this generational change with examples, exercises, and material highlighting the emergence of mobile computing and the Cloud. Updated content featuring tablet computers, Cloud infrastructure, and the x86 (cloud computing) and ARM (mobile computing devices) architectures is included. An online companion Web site provides advanced content for further study, appendices, glossary, references, and recommended reading. Features RISC-V, the first such architecture designed to be used in modern computing environments, such as cloud computing, mobile devices, and other embedded systems Includes relevant examples, exercises, and material highlighting the emergence of mobile computing and the cloud
Download or read book Protective Relaying written by J. Lewis Blackburn and published by CRC Press. This book was released on 2014-02-11 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, Protective Relaying: Principles and Applications has been the go-to text for gaining proficiency in the technological fundamentals of power system protection. Continuing in the bestselling tradition of the previous editions by the late J. Lewis Blackburn, the Fourth Edition retains the core concepts at the heart of power system analysis. Featuring refinements and additions to accommodate recent technological progress, the text: Explores developments in the creation of smarter, more flexible protective systems based on advances in the computational power of digital devices and the capabilities of communication systems that can be applied within the power grid Examines the regulations related to power system protection and how they impact the way protective relaying systems are designed, applied, set, and monitored Considers the evaluation of protective systems during system disturbances and describes the tools available for analysis Addresses the benefits and problems associated with applying microprocessor-based devices in protection schemes Contains an expanded discussion of intertie protection requirements at dispersed generation facilities Providing information on a mixture of old and new equipment, Protective Relaying: Principles and Applications, Fourth Edition reflects the present state of power systems currently in operation, making it a handy reference for practicing protection engineers. And yet its challenging end-of-chapter problems, coverage of the basic mathematical requirements for fault analysis, and real-world examples ensure engineering students receive a practical, effective education on protective systems. Plus, with the inclusion of a solutions manual and figure slides with qualifying course adoption, the Fourth Edition is ready-made for classroom implementation.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advancements in Real Time Simulation of Power and Energy Systems written by Panos Kotsampopoulos and published by MDPI. This book was released on 2021-05-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power and energy systems are characterized by the wide integration of distributed generation, storage and electric vehicles, adoption of ICT solutions, and interconnection of different energy carriers and consumer engagement, posing new challenges and creating new opportunities. Advanced testing and validation methods are needed to efficiently validate power equipment and controls in the contemporary complex environment and support the transition to a cleaner and sustainable energy system. Real-time hardware-in-the-loop (HIL) simulation has proven to be an effective method for validating and de-risking power system equipment in highly realistic, flexible, and repeatable conditions. Controller hardware-in-the-loop (CHIL) and power hardware-in-the-loop (PHIL) are the two main HIL simulation methods used in industry and academia that contribute to system-level testing enhancement by exploiting the flexibility of digital simulations in testing actual controllers and power equipment. This book addresses recent advances in real-time HIL simulation in several domains (also in new and promising areas), including technique improvements to promote its wider use. It is composed of 14 papers dealing with advances in HIL testing of power electronic converters, power system protection, modeling for real-time digital simulation, co-simulation, geographically distributed HIL, and multiphysics HIL, among other topics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book The Architecture of Computer Hardware Systems Software and Networking written by Irv Englander and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Architecture of Computer Hardware, Systems Software and Networking is designed help students majoring in information technology (IT) and information systems (IS) understand the structure and operation of computers and computer-based devices. Requiring only basic computer skills, this accessible textbook introduces the basic principles of system architecture and explores current technological practices and trends using clear, easy-to-understand language. Throughout the text, numerous relatable examples, subject-specific illustrations, and in-depth case studies reinforce key learning points and show students how important concepts are applied in the real world. This fully-updated sixth edition features a wealth of new and revised content that reflects today’s technological landscape. Organized into five parts, the book first explains the role of the computer in information systems and provides an overview of its components. Subsequent sections discuss the representation of data in the computer, hardware architecture and operational concepts, the basics of computer networking, system software and operating systems, and various interconnected systems and components. Students are introduced to the material using ideas already familiar to them, allowing them to gradually build upon what they have learned without being overwhelmed and develop a deeper knowledge of computer architecture.
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book Computer Relaying for Power Systems written by Arun G. Phadke and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition of Computer Relaying for Power Systems in 1988, computer relays have been widely accepted by power engineers throughout the world and in many countries they are now the protective devices of choice. The authors have updated this new edition with the latest developments in technology and applications such as adaptive relaying, wide area measurements, signal processing, new GPS-based measurement techniques and the application of artificial intelligence to digital relays. New material also includes sigma-delta and oversampling A/D converters, self-polarizing and cross-polarizing in transmission lines protection and optical current and voltage transformers. Phadke and Thorp have been working together in power systems engineering for more than 30 years. Their impressive work in the field has been recognized by numerous awards, including the prestigious 2008 Benjamin Franklin Medal in Electrical Engineering for their pioneering contributions to the development and application of microprocessor controllers in electric power systems. Provides the student with an understanding of computer relaying Authored by international authorities in computer relaying Contents include relaying practices, mathematical basis for protective relaying algorithms, transmission line relaying, protection of transformers, machines and buses, hardware organization in integrated systems, system relaying and control, and developments in new relaying principles Features numerous solved examples to explain several of the more complex topics, as well as a problem at the end of each chapter Includes an updated list of references and a greatly expanded subject index.
Download or read book Government Reports Announcements written by and published by . This book was released on 1974 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
