Download or read book Real Time Control Engineering written by Tian Seng Ng and published by Springer. This book was released on 2016-06-16 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the two broad areas of the electronics and electrical aspects of control applications, highlighting the many different types of control systems of relevance to real-life control system design. The control techniques presented are state-of-the-art. In the electronics section, readers will find essential information on microprocessor, microcontroller, mechatronics and electronics control. The low-level assembly programming language performs basic input/output control techniques as well as controlling the stepper motor and PWM dc motor. In the electrical section, the book addresses the complete elevator PLC system design, neural network plant control, load flow analysis, and process control, as well as machine vision topics. Illustrative diagrams, circuits and programming examples and algorithms help to explain the details of the system function design. Readers will find a wealth of computer control and industrial automation practices and applications for modern industries, as well as the educational sector.

Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Discrete Time Control System Design with Applications written by C.A. Rabbath and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides a bridge between digital control theory and vehicle guidance and control practice. It presents practical techniques of digital redesign and direct discrete-time design suitable for a real-time implementation of controllers and guidance laws at multiple rates and with and computational techniques. The theory of digital control is given as theorems, lemmas, and propositions. The design of the digital guidance and control systems is illustrated by means of step-by-step procedures, algorithms, and case studies. The systems proposed are applied to realistic models of unmanned systems and missiles, and digital implementation.

Download or read book The RCS Handbook written by Veysel Gazi and published by Wiley-Interscience. This book was released on 2001-06-08 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Getting started Quickly : RCS essentials - The reference model architecture and RCS applications - Design theme problem : automated highway system - Programming in NML - RCS control module - Writing NML configuration files - Other classes and functions - RCS diagnostics tool - Code generation and design tool.

Download or read book Internet based Control Systems written by Shuang-Hua Yang and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet plays a significant and growing role in real-time industrial manufacturing, scheduling and management. A considerable research effort has led to the development of new technologies that make it possible to use the Internet for supervision and control of industrial processes. Internet-based Control Systems addresses the challenges that need to be overcome before the Internet can be beneficially used not only for monitoring of but also remote control industrial plants. New design issues such as requirement specification, architecture selection and user-interface design are dealt with. Irregular data transmission and data loss and, in extreme cases, whole-system instability may result from Internet time-delay; this book guards against such phenomena from both computer science and control engineering perspectives. Security breaches and safety risks in an Internet-based control system could have very serious consequences and the author gives specific advice for avoiding them. This book is unique in bringing together multiple strands of research, mainly from computer science and control engineering, into an over-arching study of the entire subject. Practical perspectives are explored both through case studies in several chapters and through real applications including: · robot arm control; · web-based simulator for a catalytic reactor; · virtual supervision parameter control of a water tank system; · model predictive control for a process control unit; · remote control performance monitoring and maintenance; · remote control system design and implementation; Internet-based Control Systems is a useful introduction and guide for researchers in control engineering and computer science and developers of real-time Internet-enabling software. It can also be used for teaching a final year option or elective on Internet-enabled real-time system design, or as an advanced example of real-time software design for graduates.

Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Fieldbus Technology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fieldbus Technology (FT) is an enabling platform that is becoming the preferred choice for the next generation real-time automation and control solutions. This book incorporates a selection of research and development papers. Topics covered include: history and background, contemporary standards, underlying architecture, comparison between different Fieldbus systems, applications, latest innovations, new trends as well as issues such as compatibility, interoperability, and interchangeability.

Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--

Download or read book Algorithms and Architectures for Real Time Control 1992 written by P.J. Fleming and published by Elsevier. This book was released on 2014-05-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.

Download or read book Algorithms and Architectures for Real Time Control 1991 written by P.J. Fleming and published by Elsevier. This book was released on 2014-07-22 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer scientists have long appreciated that the relationship between algorithms and architecture is crucial. Broadly speaking the more specialized the architecture is to a particular algorithm then the more efficient will be the computation. The penalty is that the architecture will become useless for computing anything other than that algorithm. This message holds for the algorithms used in real-time automatic control as much as any other field. These Proceedings will provide researchers in this field with a useful up-to-date reference source of recent developments.

Download or read book Public Transportation Systems Principles Of System Design Operations Planning And Real time Control written by Carlos F Daganzo and published by World Scientific. This book was released on 2019-03-20 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book explains how to think systematically about public transportation through the lens of physics models. The book includes aspects of system design, resource management, operations and control. It presents both, basic theories that reveal fundamental issues, and practical recipes that can be readily used for real-world applications. The principles conveyed in this book cover not only traditional transit modes such as subways, buses and taxis but also the newer mobility services that are being enabled by advances in telematics and robotics.Although the book is rigorous, it includes numerous exercises and a presentation style suitable for senior undergraduate or entry-level graduate students in engineering. The book can also serve as a reference for transportation professionals and researchers keen in this field.

Download or read book Real time Iterative Learning Control written by Jian-Xin Xu and published by Springer Science & Business Media. This book was released on 2008-12-12 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time Iterative Learning Control demonstrates how the latest advances in iterative learning control (ILC) can be applied to a number of plants widely encountered in practice. The book gives a systematic introduction to real-time ILC design and source of illustrative case studies for ILC problem solving; the fundamental concepts, schematics, configurations and generic guidelines for ILC design and implementation are enhanced by a well-selected group of representative, simple and easy-to-learn example applications. Key issues in ILC design and implementation in linear and nonlinear plants pervading mechatronics and batch processes are addressed, in particular: ILC design in the continuous- and discrete-time domains; design in the frequency and time domains; design with problem-specific performance objectives including robustness and optimality; design in a modular approach by integration with other control techniques; and design by means of classical tools based on Bode plots and state space.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Open Source Robotics and Process Control Cookbook written by Lewin Edwards and published by Elsevier. This book was released on 2011-08-30 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this practical reference, popular author Lewin Edwards shows how to develop robust, dependable real-time systems for robotics and other control applications, using open-source tools. It demonstrates efficient and low-cost embedded hardware and software design techniques, based on Linux as the development platform and operating system and the Atmel AVR as the primary microcontroller. The book provides comprehensive examples of sensor, actuator and control applications and circuits, along with source code for a number of projects. It walks the reader through the process of setting up the Linux-based controller, from creating a custom kernel to customizing the BIOS, to implementing graphical control interfaces. Including detailed design information on:· ESBUS PC-host interface· Host-module communications protocol· A speed-controlled DC motor with tach feedback and thermal cut-off· A stepper motor controller· A two-axis attitude sensor using a MEMS accelerometer· Infrared remote control in Linux using LIRC· Machine vision using Video4Linux - The first-ever book on using open source technology for robotics design! - Covers hot topics such as GPS navigation, 3-D sensing, and machine vision, all using a Linux platform!

Download or read book The Engineering of Complex Real Time Computer Control Systems written by George W. Irwin and published by Springer. This book was released on 2007-11-23 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Complex Real-Time Computer Control Systems brings together in one place important contributions and up-to-date research results in this important area. The Engineering of Complex Real-Time Computer Control Systems serves as an excellent reference, providing insight into some of the most important research issues in the field.

Download or read book Real Time Programming 1985 written by G.M. Bull and published by Elsevier. This book was released on 2014-06-28 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the entire field of real-time programming, with emphasis on the most recent developments in industrial control and the design of process control systems. The topics covered include programming of statistical quality control applications, graphical languages for real-time programming, programming of personal computers and work stations for real-time applications. Contains 17 papers.