Download or read book Real Time Control Engineering written by Tian Seng Ng and published by Springer. This book was released on 2016-06-16 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the two broad areas of the electronics and electrical aspects of control applications, highlighting the many different types of control systems of relevance to real-life control system design. The control techniques presented are state-of-the-art. In the electronics section, readers will find essential information on microprocessor, microcontroller, mechatronics and electronics control. The low-level assembly programming language performs basic input/output control techniques as well as controlling the stepper motor and PWM dc motor. In the electrical section, the book addresses the complete elevator PLC system design, neural network plant control, load flow analysis, and process control, as well as machine vision topics. Illustrative diagrams, circuits and programming examples and algorithms help to explain the details of the system function design. Readers will find a wealth of computer control and industrial automation practices and applications for modern industries, as well as the educational sector.
Download or read book Real time Iterative Learning Control written by Jian-Xin Xu and published by Springer Science & Business Media. This book was released on 2008-12-12 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time Iterative Learning Control demonstrates how the latest advances in iterative learning control (ILC) can be applied to a number of plants widely encountered in practice. The book gives a systematic introduction to real-time ILC design and source of illustrative case studies for ILC problem solving; the fundamental concepts, schematics, configurations and generic guidelines for ILC design and implementation are enhanced by a well-selected group of representative, simple and easy-to-learn example applications. Key issues in ILC design and implementation in linear and nonlinear plants pervading mechatronics and batch processes are addressed, in particular: ILC design in the continuous- and discrete-time domains; design in the frequency and time domains; design with problem-specific performance objectives including robustness and optimality; design in a modular approach by integration with other control techniques; and design by means of classical tools based on Bode plots and state space.
Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
Download or read book Fuzzy Neural Networks for Real Time Control Applications written by Erdal Kayacan and published by Butterworth-Heinemann. This book was released on 2015-10-07 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN INDISPENSABLE RESOURCE FOR ALL THOSE WHO DESIGN AND IMPLEMENT TYPE-1 AND TYPE-2 FUZZY NEURAL NETWORKS IN REAL TIME SYSTEMS Delve into the type-2 fuzzy logic systems and become engrossed in the parameter update algorithms for type-1 and type-2 fuzzy neural networks and their stability analysis with this book! Not only does this book stand apart from others in its focus but also in its application-based presentation style. Prepared in a way that can be easily understood by those who are experienced and inexperienced in this field. Readers can benefit from the computer source codes for both identification and control purposes which are given at the end of the book. A clear and an in-depth examination has been made of all the necessary mathematical foundations, type-1 and type-2 fuzzy neural network structures and their learning algorithms as well as their stability analysis. You will find that each chapter is devoted to a different learning algorithm for the tuning of type-1 and type-2 fuzzy neural networks; some of which are: • Gradient descent • Levenberg-Marquardt • Extended Kalman filter In addition to the aforementioned conventional learning methods above, number of novel sliding mode control theory-based learning algorithms, which are simpler and have closed forms, and their stability analysis have been proposed. Furthermore, hybrid methods consisting of particle swarm optimization and sliding mode control theory-based algorithms have also been introduced. The potential readers of this book are expected to be the undergraduate and graduate students, engineers, mathematicians and computer scientists. Not only can this book be used as a reference source for a scientist who is interested in fuzzy neural networks and their real-time implementations but also as a course book of fuzzy neural networks or artificial intelligence in master or doctorate university studies. We hope that this book will serve its main purpose successfully. Parameter update algorithms for type-1 and type-2 fuzzy neural networks and their stability analysis Contains algorithms that are applicable to real time systems Introduces fast and simple adaptation rules for type-1 and type-2 fuzzy neural networks Number of case studies both in identification and control Provides MATLAB® codes for some algorithms in the book
Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.
Download or read book Real Time Optimization by Extremum Seeking Control written by Kartik B. Ariyur and published by John Wiley & Sons. This book was released on 2003-10-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-close look at the theory behind and application of extremum seeking Originally developed as a method of adaptive control for hard-to-model systems, extremum seeking solves some of the same problems as today's neural network techniques, but in a more rigorous and practical way. Following the resurgence in popularity of extremum-seeking control in aerospace and automotive engineering, Real-Time Optimization by Extremum-Seeking Control presents the theoretical foundations and selected applications of this method of real-time optimization. Written by authorities in the field and pioneers in adaptive nonlinear control systems, this book presents both significant theoretic value and important practical potential. Filled with in-depth insight and expert advice, Real-Time Optimization by Extremum-Seeking Control: * Develops optimization theory from the points of dynamic feedback and adaptation * Builds a solid bridge between the classical optimization theory and modern feedback and adaptation techniques * Provides a collection of useful tools for problems in this complex area * Presents numerous applications of this powerful methodology * Demonstrates the immense potential of this methodology for future theory development and applications Real-Time Optimization by Extremum-Seeking Control is an important resource for both students and professionals in all areas of engineering-electrical, mechanical, aerospace, chemical, biomedical-and is also a valuable reference for practicing control engineers.
Download or read book Distributed Databases in Real Time Control written by M.G. Rodd and published by Elsevier. This book was released on 2014-07-04 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems surrounding the subject of distributed databases in real-time control were addressed at the workshop. The difficulties included finding new, high-level conceptual models as conventional solutions are rendered useless in distributed databases. The other problems covered include the difficulties faced due to huge transaction fluxes and time constraints. The papers cover these theoretical issues plus an applications section which provides case studies of efficient applied systems which will be important for the development of this essential field.
Download or read book Artificial Intelligence in Real Time Control written by M. G. Rodd and published by Elsevier. This book was released on 2014-05-23 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Real-Time Control documents the proceedings of the IFAC Workshop held in Clyne Castle, Swansea, UK, 21-23 September 1988. It includes two keynote addresses that discussed architectural issues for expert systems in real-time control; the problem of representing knowledge and reasoning; and the problems encountered in obtaining such information. Other papers contained in these proceedings are representative of the major research bodies active throughout the world in the application of AI techniques in real-time control, although it was inevitable that a Europe-based conference would highlight the work of the European groups. While AI is clearly still in the process of establishing itself, it is undoubtedly a major new area of engineering endeavor. Practical experience is still relatively limited, and many of the results discussed at this event were obtained through simulation or, in a few cases, from reduced practical experience. The importance, though, lies in the fact that many countries are pouring extensive resources into the attempt to control difficult processes by using AI techniques. The wide cross section of interest was demonstrated by the fact that many diverse industries were represented at the workshop—ranging from power-systems control to telecommunications, and into the steel industry.
Download or read book The RCS Handbook written by Veysel Gazi and published by Wiley-Interscience. This book was released on 2001-06-08 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: As control systems become increasingly complex, there is a growing need for software tools for use in their design and implementation. Introducing proven, free-to-use software from the NIST's real-time control systems (RCS) library, this practical resource arms readers with the tools they need to construct hierarchical and distributed RCSs for challenging industrial applications. Featuring numerous design and implementation examples, this is a complete reference to high-technology automation solutions. Market: Electronic Engineers and Computer Scientists involved with controls; Professionals in manufacturing, process control, and robotics.
Download or read book Algorithms and Architectures for Real Time Control 1992 written by P.J. Fleming and published by Elsevier. This book was released on 2014-05-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.
Download or read book Artificial Intelligence in Real Time Control 1991 written by M.G. Rodd and published by Elsevier. This book was released on 2014-05-23 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of proceedings contains the most significant papers presented at the third IFAC Workshop on Artificial Intelligence in Real-time Control, which was held from September 23-25, 1991 in the USA. In this workshop, although there were still some "exotic" applications, a more practical view of the applications and limitations of current AI technology dominated the participants' discussions. With its resultant focus on reliability and safety considerations, the workshop posed as many questions as it answered. It provides an excellent mirror of the current state-of-the-art which these proceedings are intended to illustrate.
Download or read book Artificial Intelligence in Real Time Control 1992 written by M.G. Rodd and published by Elsevier. This book was released on 2014-06-28 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium had two main aims, to investigate the state-of-the-art in the application of artificial intelligence techniques in real-time control, and to bring together control system specialists, artificial intelligence specialists and end-users. Many professional engineers working in industry feel that the gap between theory and practice in applying control and systems theory is widening, despite efforts to develop control algorithms. Papers presented at the meeting ranged from the theoretical aspects to the practical applications of artificial intelligence in real-time control. Themes were: the methodology of artificial intelligence techniques in control engineering; the application of artificial intelligence techniques in different areas of control; and hardware and software requirements. This symposium showed that there exist alternative possibilities for control based on artificial intelligence techniques.
Download or read book Real Time Control of the Industrial Enterprise written by Peter Martin and published by Momentum Press. This book was released on 2014-06-12 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s world of manufacturing, it’s possible to be efficient but not profitable. How is this possible? While today’s manufacturing process control is real time, enterprise management remains transactional, and accounting systems remain structured for early 1800s piecework. Why are almost all of the productivity gains in manufacturing arising from better automation and control of processes (continuous, batch, hybrid, or discrete) and not from better chemistry, design, management, or financial controls? This book shows you exactly why this has happened and just how to fix it. The author details how automation and control can be applied to the supply chain, the enterprise, and to financial management. Inside, you’ll learn: • How to use the principles of real-time process control to better manage, measure, and control manufacturing businesses, both horizontally and vertically; • How to achieve much greater speed of information transfer for improved control over supply chain and distribution; and • How totally integrated inventory control, automated manufacturing, automated customer service, and smart pricing control ultimately lead to higher profits.
Download or read book Artificial Intelligence in Real Time Control 1994 written by A. Crespo and published by Elsevier. This book was released on 2014-06-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence is one of the new technologies that has contributed to the successful development and implementation of powerful and friendly control systems. These systems are more attractive to end-users shortening the gap between control theory applications. The IFAC Symposia on Artificial Intelligence in Real Time Control provides the forum to exchange ideas and results among the leading researchers and practitioners in the field. This publication brings together the papers presented at the latest in the series and provides a key evaluation of present and future developments of Artificial Intelligence in Real Time Control system technologies.
Download or read book Algorithms and Architectures for Real Time Control 1991 written by P.J. Fleming and published by Elsevier. This book was released on 2014-07-22 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer scientists have long appreciated that the relationship between algorithms and architecture is crucial. Broadly speaking the more specialized the architecture is to a particular algorithm then the more efficient will be the computation. The penalty is that the architecture will become useless for computing anything other than that algorithm. This message holds for the algorithms used in real-time automatic control as much as any other field. These Proceedings will provide researchers in this field with a useful up-to-date reference source of recent developments.
Download or read book Artificial Intelligence in Real Time Control 1989 written by Hua-Tian Li and published by Elsevier. This book was released on 2014-07-04 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the workshop are representative of the state-of-the art of artificial intelligence in real-time control. The issues covered included the use of AI methods in the design, implementation, testing, maintenance and operation of real-time control systems. While the focus was on the fundamental aspects of the methodologies and technologies, there were some applications papers which helped to put emerging theories into perspective. The four main subjects were architectural issues; knowledge - acquisition and learning; techniques; and scheduling, monitoring and management.
Download or read book Visual Servoing Real time Control Of Robot Manipulators Based On Visual Sensory Feedback written by Koichi Hashimoto and published by World Scientific. This book was released on 1993-10-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats visual feedback control of mechanical systems, mostly robot manipulators. It not only deals with image processing techniques and robot control schemes but also covers the latest investigation of the design of the visual servo mechanism based on modern linear and nonlinear control theory, the adaptive control scheme, fuzzy logic, and neural networks. New concepts for utilizing visual sensory information for real-time manipulator control are derived and the performances are evaluated through simulations and/or experiments.The contributors to this book are robotics specialists from all over the world. The book gives a practical perspective on visual servoing to researchers, engineers, and students working in this area.
