Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.
Download or read book Reactive Modifiers for Polymers written by S. Al-Malaika and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical modification of polymers by reactive modifiers is no longer an academic curiosity but a commercial reality that has delivered a diverse range of speciality materials for niche markets: reactively grafted styrenic alloys, maleated polyolefins, super-tough nylons, silane modified and moisture-cured polyolefins, and thermoplastic elastomers, are but few exam ples of commercial successes. Although the approach of reactive modification of polymers has been largely achieved either in solution or in the solid state (through in situ reactions in polymer melts), it is the latter route that has attracted most attention in the last two decades owing to its flexibility and cost-effective ness. This route, referred to as reactive processing, focuses on the use of suitable reactive modifier(s) and the adoption of conventional polymer processing machinery, an extruder or a mixer, as a chemical reactor, to perform in situ targeted reactions for chemical modification of preformed polymers. This relatively simple, though scientifically highly challenging, approach to reactive modification offers unique opportunities in exploiting various reactive modifiers for the purpose of altering and transforming in a controlled manner the properties of preformed commercial polymers into new/speciality materials with tailor-made properties and custom-designed performance for target applications. Such an economically attractive route constitutes a radical diversion away from the traditional practices of manufacturing new polymers from monomers which involves massive in vestments in sophisticated technologies and chemical plants.
Download or read book Reactive Processing of Polymers written by M.W.R. Brown and published by iSmithers Rapra Publishing. This book was released on 1994 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in machinery, materials and applications are outlined in the cond104 of commercial considerations and advances in fundamental understanding. The principles and benefits of polymer modification and blending via reactive extrusion are explained. A b257 of novel techniques which have developed out of the major reactive processes are also described. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Reactive Processing of Polymers written by V. P. Begishev and published by ChemTec Pub.. This book was released on 1999 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses various technological methods of reactive processing of polymers with a special emphasis on production of large size articles. Also shows methods of scaling up from laboratory to production stage by a combination of process modeling and application of modern analytical techniques to evaluate similarity of production on different scales. This approach not only gives objective results required for precise evaluation of process kinetics, but it is applied in the book to real systems used as examples of model application. The book begins with a discussion of the chemistry of reactive processes that are then discussed from the point of view of their modeling. In the next section, analytical control methods are evaluated for their usefulness in process monitoring. The final chapter discusses details of various technological methods of reactive processing by means of 70 diagrams. It also describes how to control and introduce new processes without long trials, and design technology that is cost-efficient and environmentally friendly.
Download or read book Chemorheology of Polymers written by Peter J. Halley and published by Cambridge University Press. This book was released on 2009-05-28 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the dynamics of reactive polymer processes allows scientists to create new, high-value, high-performance polymers. This book is an indispensable resource for researchers and practitioners working in this area. It includes coverage of thermoplastics, thermoset and reactive polymers, together with practical industrial processes and modern chemorheological models and tools.
Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.
Download or read book Reactive Processing of Polymers written by M. Lambla and published by . This book was released on 1986 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Extrusion written by Marino Xanthos and published by Hanser Gardner Publications. This book was released on 1992-01-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a highly successful PPI advanced technical course given by the author, this book combines the applied and fundamental aspects of reactive extrusion.
Download or read book New Polymeric Materials written by Ezio Martuscelli and published by VSP. This book was released on 1987 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new polymeric materials has caused a considerable expansion in the field of reactive processing. These new materials are very competitive compared to the traditional ones with respect to production costs and performance. The reports published in this volume present the recent developments and emerging trends in the field of reactive processing and the physical properties of the resulting polymeric materials. Special attention is given to the chemical, kinetic and rheological aspects of reactive processing.
Download or read book Reactive and Functional Polymers Volume One written by Tomy J. Gutiérrez and published by Springer Nature. This book was released on 2020-08-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive and functional polymers are manufactured with the aim of improving the performance of unmodified polymers or providing functionality for different applications. These polymers are created mainly through chemical reactions, but there are other important modifications that can be carried out by physical alterations in order to obtain reactive and functional polymers. This volume presents a comprehensive analysis of these reactive and functional polymers. Reactive and Functional Polymers Volume One provides the principles and foundations for the design, development, manufacture and processing of reactive and functional polymers based primarily on biopolymers, polyesters and polyurenthanes. The text provides an in-depth review of updated sources on reactive resins and silicones. In this book, world-renowned researchers have participated, including Dr. Runcang Sun (Associate editor for the journal ‘Carbohydrate Polymers’). With its comprehensive scope and up-to-date coverage of issues and trends in Reactive and Functional Polymers, this is an outstanding book for students, professors, researchers and industrialists working in the field of polymers and plastic materials.
Download or read book Reactive Polymer Blending written by W. E. Baker and published by Hanser Gardner Publications. This book was released on 2001 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the general principles involved in successful reactive blending. Pioneering work on several key issues including copolymer formation, interface development, and morphology are covered.
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Proceedings of the Second 2 International Conference on Reactive Processing of Polymers written by J. Thomas Lindt and published by . This book was released on 1982 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Polymer Processing Operations written by Nicholas P. Cheremisinoff and published by Univ. Press of Mississippi. This book was released on 1998-12-31 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers advanced polymer processing operations and is designed to provide a description of some of the latest industry developments for unique products and fabrication methods. Contributors for this volume are from both industry and academia from the international community. This book contains nine chapters covering advanced processing applications and technologies.
Download or read book The University of Pittsburgh Presents the Proceedings of the First International Conference on Reactive Processing of Polymers written by and published by . This book was released on 1981 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
