Download or read book Reaction Based SiC Materials for Joining Silicon Carbide Composites for Fusion Energy written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of large or complex silicon carbide-fiber-reinforced silicon carbide (SiC/SiC) components for fusion energy systems requires a method to assemble smaller components that are limited in size by manufacturing constraints. Previous analysis indicates that silicon carbide should be considered as candidate joint materials. Two methods to obtain SiC joints rely on a reaction between silicon and carbon to produce silicon carbide. This report summarizes preliminary mechanical properties of joints formed by these two methods. The methods appear to provide similar mechanical properties. Both the test methods and materials are preliminary in design and require further optimization. In an effort to determine how the mechanical test data is influenced by the test methodology and specimen size, plans for detailed finite element modeling (FEM) are presented.
Download or read book Effect of Heat Treatment on Silicon Carbide Based Joining Materials for Fusion Energy written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Two general approaches to obtaining silicon carbide-based joint materials were used. The first method relies on reactions between silicon and carbon to form silicon carbide, or to bond silicon carbide powders together. The second method consists of pyrolysing a polycarbosilane polymer to yield an amorphous, covalently bonded material. In order to assess the long-term durability of the joint materials, various heat treatments were performed and the effects on the mechanical properties of the joints were measured. Although the joints derived from the polycarbosilane polymer were not the strongest, the value of strength measured was not affected by heat treatment. On the other hand, the value of the strength of the reaction-based joints was affected by heat treatment, indicating the presence of residual stresses or unreacted material subsequent to processing. Further investigation of reaction-based joining should consist of detailed microscopic studies; however, continued study of joints derived from polymers is also warranted.
Download or read book Silicon Carbide Ceramics 1 written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered by Edward G. Acheson about 1890, silicon carbide is one of the oldest materials and also a new material. It occurs naturally in meteorites, but in very small amounts and is not in a useable state as an industrial material. For industrial require ments, large amounts of silicon carbide must be synthesized by solid state reactions at high temperatures. Silicon carbide has been used for grinding and as an abrasive material since its discovery. During World War II, silicon carbide was used as a heating element; however, it was difficult to obtain high density sintered silicon carbide bodies. In 1974, S. Prochazka reported that the addition of small amounts of boron compounds and carbide were effective in the sintering process to obtain high density. It was then possible to produce high density sintered bodies by pressureless sintering methods in ordinary atmosphere. Since this development, silicon carbide has received great attention as one of the high temperature structural ceramic materials. Since the 1970s, many research papers have appeared which report studies of silicon carbide and silicon nitride for structural ceramics.
Download or read book Advances in SiC SiC Ceramic Composites written by Akira Kohyama and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This transactions volume contains 33 papers from the CREST International Symposium on SiC/SiC Composite Materials Research and Development and Its Application to Advanced Energy Systems held May 20-22, 2002 in Kyoto, Japan. Chapters include Processing for SiC/SiC Composites; Processing for SiC/SiC Composite Constituent; Characterization of Thermomechanical Performance; and Joining Technologies for Advanced Energy Applications. 373 pages.
Download or read book Joining of Silicon Carbide Using Interlayer with Matching Coefficient of Thermal Expansion written by and published by . This book was released on 1996 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this study is to develop a technique for joining a commercially available Silicon Carbide that gives good room temperature strength and the potential for good high temperature strength. One secondary objective is that the joining technique be adaptable to SiC{sub f}/SiC composites and/or Nickel based superalloys, and another secondary objective is that the materials provide good neutron irradiation resistance and low activation for potential application inside nuclear fusion reactors. The joining techniques studied here are: (1) reaction bonding with Al-Si/Si/SiC/C; (2) reaction/infiltration with calcium aluminum silicate; (3) ion exchange mechanism to form calcium hexaluminate (a refractory cement); and (4) oxide frit brazing with cordierite.
Download or read book A Review of Joining Techniques for SiC sub F SiC Composites for First Wall Applications written by and published by . This book was released on 1998 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many methods for joining monolithic and composite silicon carbide are available. Three techniques are candidates for use in fusion energy systems: in-situ displacement reactions, pre-ceramic polymer adhesives, and reaction bonding. None of the methods are currently developed enough to satisfy all of the criteria required, i.e., low temperature fabrication, high strength, and radiation stability. 58 refs.
Download or read book 23nd Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 20 Issue 3 written by Ersan Ustundag and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites B Volume 24 Issue 4 written by Waltraud M. Kriven and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book 25th Annual Conference on Composites Advanced Ceramics Materials and Structures B Volume 22 Issue 4 written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Silicon Carbide Ceramics Gas phase reactions fibers and whisker joining written by Shigeyuki Sōmiya and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.
Download or read book A NEW APPROACH TO JOINING SIC SIC COMPOSITES written by Charles H. Henager and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A new approach to joining SiC-based ceramics is described and evaluated for Fusion Energy systems. The joining method is based on pre-ceramic polymers filled with reactive and inert filler powders and is similar to other approaches that use such materials. This approach differs in the particular polymer system and in the details of the processing. A principal advantage of this approach relative to other, similar approaches is that the polymer system is easily handled in ambient air and can be processed in air. This makes the joining process simple and field repairable. The joining compound is a liquid that can be painted, sprayed, or applied by dip coating.
Download or read book Radiation Effects and Micromechanics of SiC SiC Composites December 1 1990 November 14 1993 and Modeling the Mechanical Behavior of SiC SiC Composites in Fusion Environments November 15 1993 November 14 1996 Final Report December 1 1990 November 14 1996 written by and published by . This book was released on 1997 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of Silicon Carbide composite materials for structural applications in fusion energy systems is mainly motivated by the prospect that fusion power systems utilizing the material will have a much more favorable environmental impact. The research team at UCLA was the first to identify the potential advantages of SiC/SiC composite materials through early System Studies. Consequently, two three-year term grants have been awarded to the team, in order to focus on modeling the effects of irradiation on key properties that have been recognized by the community as fundamental to the successful development of the composite. Two main tasks, which are further subdivided into several subtasks each, have been pursued during the course of research during the period: December 1990 through November 1996. The first task deals with modeling the effects of irradiation on the dimensional stability of SiC. To achieve this goal, a substantial effort was launched for modeling the evolution of the microstructure under irradiation. Rate and Fokker-Planck theories have been advanced to model the complex multi-component system of SiC under irradiation. The effort has resulted in a deeper understanding of the interaction between displacement damage components, and transmutant helium gas atoms. Utilizing the methods of Molecular Dynamics (MD) and Monte Carlo (MC), the energetics of defects and the basic displacement mechanisms in SiC have been fully delineated. An advanced Fokker-Planck approach was formulated to determine the phase content and size distribution of damage microstructure in SiC. Finally, a rate theory model was developed and successfully applied to the experimental swelling data on SiC. In the second task, the authors investigated the mechanical behavior of SiC/SiC composites under the irradiation conditions of fusion reactors. The main focus of the second task has been on developing models for the micro-mechanics of cracks in the fiber reinforced matrix of the silicon carbide composite. The effects of irradiation on inducing inelastic deformations in the fiber and the matrix were emphasized. Brief reviews for the results of their research are given here, followed by copies of 26 journal publications resulting from the work supported under this grant.
Download or read book Ceramic Materials for Energy Applications Volume 32 Issue 9 written by Yutai Katoh and published by John Wiley & Sons. This book was released on 2011-11-11 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Ceramics for Electric Energy Generation, Storage and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries symposia.
Download or read book Ceramic Integration and Joining Technologies written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book joins and integrates ceramics and ceramic-based materials in various sectors of technology. A major imperative is to extract scientific information on joining and integration response of real, as well as model, material systems currently in a developmental stage. This book envisions integration in its broadest sense as a fundamental enabling technology at multiple length scales that span the macro, millimeter, micrometer and nanometer ranges. Consequently, the book addresses integration issues in such diverse areas as space power and propulsion, thermoelectric power generation, solar energy, micro-electro-mechanical systems (MEMS), solid oxide fuel cells (SOFC), multi-chip modules, prosthetic devices, and implanted biosensors and stimulators. The engineering challenge of designing and manufacturing complex structural, functional, and smart components and devices for the above applications from smaller, geometrically simpler units requires innovative development of new integration technology and skillful adaptation of existing technology.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
