Download or read book Re Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Download or read book Re Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.
Download or read book Re engineering Manufacturing for Sustainability written by Andrew Y. C. Nee and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.
Download or read book BUSINESS PROCESS REENGINEERING written by R. RADHAKRISHNAN and published by PHI Learning Pvt. Ltd.. This book was released on 2008-06-16 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores the fundamental principles of Business Process Reengineering (BPR). The express aim of the book is to address the needs of MBA students opting for courses in ‘Information Technology Management or ‘Operations Management’, MCA students who opt for Business Processes as an elective, and students of BE/B.Tech Mechanical Engineering and Production Engineering for courses in Process Engineering/Automation/Management System Design. The book provides them with the concepts, methodologies, models and tools needed to understand and implement BPR. In a nutshell, the book offers a step-by-step presentation of the practical framework and management techniques needed to achieve engineering solutions for implementation of BPR in an organization. The initial chapters introduce the reader to the need for BPR and its utility in relation to IT and manufacturing. The middle chapters cover the methodology, success factors, barriers, and the technologies that are relevant for BPR implementation. The latter chapters present solutions like lean and virtual manufacturing, enterprise resource planning, and functional information systems. An exclusive chapter is devoted to concepts and tasks of software reengineering. Aided by extensive illustrations, end-of-chapter review questions, as well as a chapter consisting entirely of case studies, this book will help students develop a rich, multifaceted perspective, to enable them to handle complex management and engineering problems. The book will be useful to students in practically all branches of engineering, not just mechanical/production/industrial engineering.
Download or read book Re engineering of Products and Processes written by Federico Rotini and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst previous methods for business process reengineering have focused on time and cost reduction policies to preserve competitive services and products, Re-engineering of Products and Processes: How to Achieve Global Success in the Changing Marketplace presents a new approach which aims to include aspects that impact the customer perceived value. This method supports business reengineering initiatives by identifying process bottlenecks as well as new products and services viable to overcome market competition. This original approach is described step-by-step, explaining the theory through examples of performable tasks and the selection of relevant tools according to the nature of the problem. Supported by illustrations, tables and diagrams, Re-engineering of Products and Processes: How to Achieve Global Success in the Changing Marketplace clearly explains a method which is then applied to several case studies across different industrial sectors. Re-engineering of Products and Processes: How to Achieve Global Success in the Changing Marketplace provides a scientific reference for researchers and PhD students working in several fields of the Industrial Engineering: mechanical, electric, electronic sectors and, more in general, all the industrial areas where there are needs to design innovative products. The step-by-step description on how to employ the proposed method and its application to practical examples, make the book a key resource for industry consultants and managers who look to increase the value of their products and services for new and existing customers.
Download or read book Re engineering the Enterprise written by J. Browne and published by Springer. This book was released on 2013-06-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business process re-engineering tools offer techniques to model the enterprise and identify opportunities to make change. This book examines the approaches, tools and techniques which support redesign of the enterprise to achieve world class performance.
Download or read book Reengineering the Factory written by A. Richard Shores and published by Irwin Professional Publishing. This book was released on 1994 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's manufacturing environment is in constant flux--good news for organizations flexible enough to adapt to the latest improvement techniques. This book helps readers gain a comprehensive understanding of what it means to be world-class in the current competitive climate.
Download or read book Organizational Transformation and Process Reengineering written by Johnson Edosomwan and published by CRC Press. This book was released on 1995-08-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organizational Transformation and Process Engineering is the key to achieving success in the new customer-driven market economy. Organizations are going through tremendous changes, creating environments where all employees can contribute their best, where customer expectations are exceeded, and where efficiency, effectiveness, productivity, quality, customer satisfaction, and competitiveness are taken seriously as critical success factors. Written to assist those companies and organizations striving to keep pace with the competitive atmosphere of the 90s, this book provides all the essential tools, techniques, methodologies, models, and technologies for transformation and reengineering. Broad and comprehensive in scope, Organizational Transformation and Process Reengineering explains how to change not just one area, but structures, policies, procedures, processes, and management systems-any aspect of an organizational structure that no longer responds to the current demands of the marketplace. Years of research, teaching, consulting, and practical work experience led Dr. Edosomwan, a leader in his field, to put his unique and practical theories into a volume designed to help organizations overcome the impediments involved in process reengineering projects. He outlines a step-by-step methodology for analyzing organizational structures; the six R's of organizational transformation; models that can be utilized in both public and private organizations; tools and techniques for achieving reengineering goals; implementation plans; and key survival and success factors.
Download or read book Modelling Techniques for Business Process Re engineering and Benchmarking written by Guy Doumeingts and published by Springer. This book was released on 2016-01-09 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today enterprises must strive to improve their competitiveness in a changing environment. To reach this objective it is necessary for companies to evaluate their performances and to combine modelling, business process re-engineering and benchmarking techniques. This book demonstrates the successful combination and implementation of these various techniques.
Download or read book Computer Applications in Production and Engineering written by Frank Plonka and published by Springer. This book was released on 2013-06-05 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the latter half of the 20th century, forces have conspired to make the human community, at last, global. The easing of tensions between major nations, the expansion of trade to worldwide markets, widespread travel and cultural exchange, pervasive high-speed communications and automation, the explosion of knowledge, the streamlining of business, and the adoption of flexible methods have changed the face of manufacturing itself, and of research and education in manufacturing. The acceptance of the continuous improvement process as a means for organizations to respond quickly and effectively to swings in the global market has led to the demand for individuals educated in a broad range of cultural, organizational, and technical fields and capable of absorbing and adapting required knowledge and training throughout their careers. No longer will manufacturing research and education focus on an industrial sector or follow a national trend, but rather will aim at enabling international teams of companies to cooperate in rapidly designing, prototyping, and manufacturing products. The successful enterprise of the 21st century will be characterized by an organizational structure that efficiently responds to customer demands and changing global circumstances, a corporate culture that empowers employees at all levels and encourages constant communication among related groups, and a technological infrastructure that fully supports process improvement and integration. In changing itself to keep abreast of the broader transformation in manufacturing, the enterprise must look first at its organization and culture, and thereafter at supporting technologies.
Download or read book Methods in Product Design written by Ali K. Kamrani and published by CRC Press. This book was released on 2016-04-19 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industries adopt consumer-focused product development strategies, they should offer broader product ranges in shorter design times and the processes that can manufacture in arbitrary lot sizes. In addition, they would need to apply state-of-the-art methods and tools to easily conduct early product design and development trade-off analysis among competing objectives. Methods in Product Design: New Strategies in Reengineering supplies insights into the methods and techniques that enable implementing a consumer-focused product design philosophy by integrating design and development capabilities with intelligent computer-based systems. The book defines customer focused design and discusses ways to assess changing demands and sources, and delves into what is needed to successfully manufacture goods in a demanding market. It reviews proven methods for assessing customer need. Then, after showing how changing needs impact the reengineering of products, it explains how change can be efficiently achieved. It details how IT advances and technology support customer-focused product development, discusses cutting-edge mass customization principles that maximize cost-effective production, and illustrates how to implement effective predictive maintenance policies. Methods in Product Design: New Strategies in Reengineering provides methods, state-of-the-art technologies, and new strategies for customer-focused product design and development that allow organizations to quickly respond to the demanding global marketplace.
Download or read book Re engineering for Sustainable Industrial Production written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-03-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's changing world, enterprises need to survive in an ever volatile competitive market environment. Their success will depend on the strategies they practice and adopt. Every year, new ideas and concepts are emerging in order for companies to become successful enterprises. Cross Border Enterprises is the new 'hot' topic arising in the business process world at present. Many terms have been coined together and are being driven in the popular business press to describe this new strategy of conducting business, ie. Extended Enterprise (Browne et al. , 1995; O'Neill and Sacket, 1994; Busby and Fan, 1993; Caskey, 1995), Virtual Enterprise (Goldmann and Preiss, 1991; Parunak, 1994; Goranson, 1995; Doumeingts et al. , 1995), Seamless Enterprise (Harrington, 1995), Inter-Enterprise Networking (Browne et al. , 1993), Dynamic Enterprise (Weston, 1996) and so on. Many people have argued that they mean the same thing, just using different words. Others feel they are different. But how different are they? In this paper the authors will present some basic lines required from this new strategy for conducting and coordinating distributed business processes (DBP), as well as trying to clarify the particularities of two of the widest spread terms related to it: Virtual and Extended Enterprise. 2 CLUSTERS OF PRESSURES The business world currently faces an increased trend towards globalisation, environmentally benign production and customisation of products and processes, forcing individual enterprises to work together across the value chain in order to cope with market influences.
Download or read book Functional Reverse Engineering of Machine Tools written by Wasim Ahmed Khan and published by CRC Press. This book was released on 2019-09-23 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents capacity building in machine tool development Discusses engineering design for machine tools Covers prototyping of strategic and non-strategic machine tools Illustrates augmented reality for machine tools Includes Internet of Things (IoT) for machine tools
Download or read book Reverse Engineering written by A.C. Telea and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering encompasses a wide spectrum of activities aimed at extracting information on the function, structure, and behavior of man-made or natural artifacts. Increases in data sources, processing power, and improved data mining and processing algorithms have opened new fields of application for reverse engineering. In this book, we present twelve applications of reverse engineering in the software engineering, shape engineering, and medical and life sciences application domains. The book can serve as a guideline to practitioners in the above fields to the state-of-the-art in reverse engineering techniques, tools, and use-cases, as well as an overview of open challenges for reverse engineering researchers.
Download or read book Reengineering the Corporation written by Michael Hammer and published by Zondervan. This book was released on 2009-10-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most successful business book of the last decade, Reengineering the Corporation is the pioneering work on the most important topic in business today: achieving dramatic performance improvements. This book leads readers through the radical redesign of a company's processes, organization, and culture to achieve a quantum leap in performance. Michael Hammer and James Champy have updated and revised their milestone work for the New Economy they helped to create -- promising to help corporations save hundreds of millions of dollars more, raise their customer satisfaction still higher, and grow ever more nimble in the years to come.
Download or read book Handbook of Life Cycle Engineering written by Arturo Molina and published by Springer Science & Business Media. This book was released on 1999-01-31 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook focuses on a series of concepts, models and technologies which can be used to improve current practice in life cycle engineering in manufacturing companies around the world. Experts on the main issues relating to life cycle engineering have produced a superb collection of chapters. All the contributing authors are researchers and engineers in the fields of manufacturing paradigms, enterprise integration, product life cycle and technologies for life cycle engineering. Academics and researchers will find this book to be a valuable reference tool. The book illustrates those key factors that ensure successful enterprise and product life cycle integration. Due to the book being developed as a joint industry and university project, its approach should be helpful to both practising professionals and academics. An overview of life cycle engineering concepts, models, methodologies and practices that have been proved to significantly improve the integration and productivity of manufacturing companies have been clearly explained in this handbook. This book will be essential for engineers, designers, product support personnel dealing with enterprise engineering projects. It will also be of immense use to lecturers and senior lecturers working in the fields of enterprise integration, product development, concurrent engineering and integrated manufacturing systems.
Download or read book Advances in Production Management Systems written by Norio Okino and published by Springer. This book was released on 2013-06-29 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 41 revised papers selected from 125 papers presented at the th 6 IFIP Technical Committee 5/Working Group 5.7 International Conference on Advances in Production Management Systems - APMS'96 -held at Kyoto, Japan, 4-6 November 1996. The task of selecting papers was accomplished by the IPC members voting. The selected papers were reviewed by IPC members who attended the conference. Based on the comments of reviewers, each paper was revised and rewritten in the format of this book. Therefore, the quality of each paper was raised very much. The papers selected in this volume were classified into invited articles and six themes taking into account the perspectives and future challenges in production management systems. Invited articles provide the overview of the present and future trend in the manufacturing world. Six themes were Next Generation Manufacturing Systems and Production Management, Benchmarking, Integration in Manufacturing and Decentralized Production Management, Strategic Aspects, Production Planning, and Production Scheduling. Each theme covers important area of present and future production management reflecting the recent trend in manufacturing toward globalization, agility in variety production, human centered manufacturing, environment consciousness, and so on. We hope that this volume will emerge a lot of new ideas to reach the goal of IFIP WG5.7 "Computer Aided Production Management" and to bridge the gap between research and industrial practice in production management systems.
