Download or read book Rayleigh s Principle and Its Applications to Engineering written by George Frederick James Temple and published by Courier Corporation. This book was released on 2004-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text develops Rayleigh's principle in a manner that provides upper and lower estimates of the true value, so that frequencies and critical loads can be determined with close and known degrees of approximation, well within the degree of accuracy usually demanded in engineering problems. Its presentation is accompanied by illustrative examples and rigorous proofs.
Download or read book The Rayleigh Ritz Method for Structural Analysis written by Sinniah Ilanko and published by John Wiley & Sons. This book was released on 2014-12-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of the theory behind the Rayleigh-Ritz (R-R) method, as well as a discussion of the choice of admissible functions and the use of penalty methods, including recent developments such as using negative inertia and bi-penalty terms. While presenting the mathematical basis of the R-R method, the authors also give simple explanations and analogies to make it easier to understand. Examples include calculation of natural frequencies and critical loads of structures and structural components, such as beams, plates, shells and solids. MATLAB codes for some common problems are also supplied.
Download or read book Electric Waves written by Heinrich Hertz and published by . This book was released on 1893 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Revival Philosophy and the Physicists 1937 written by Lizzie Susan Stebbing and published by Routledge. This book was released on 2018-05-08 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by a philosopher for other philosophers and for that section of the reading public who buy in large quantities and, no doubt, devour with great earnestness the popular books written by scientists for their enlightenment. We common readers, to adapt a phrase from Samuel Johnson, are fitted neither to criticize physical theories not to decide what precisely are their implications. We are dependent upon the scientists for an exposition of those developments which – so we find them proclaiming – have important and far-reaching consequences for philosophy. Unfortunately, however, our popular expositors do not always serve us very well. The two who are most widely read in this country are Sir Arthur Eddington and Sir James Jeans. They are not always reliable guides. Their influence has been considerable upon the reading public, upon theologians, and upon preachers; they have even misled philosopher who should have known better. Accordingly, it has seemed to me to be worth while to examine in some detail the philosophical views that they have put forth and to criticize the grounds upon which these views are based.
Download or read book The Continuum and other types of serial order written by E.V. Huntington and published by Рипол Классик. This book was released on with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Course in Mathematical Analysis pt 2 Differential equations c1917 written by Edouard Goursat and published by . This book was released on 1916 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theories and Applications of Plate Analysis written by Rudolph Szilard and published by John Wiley & Sons. This book was released on 2004-01-02 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by a renowned structural engineer offers comprehensive coverage of both static and dynamic analysis of plate behavior, including classical, numerical, and engineering solutions. It contains more than 100 worked examples showing step by step how the various types of analysis are performed.
Download or read book An Introduction to the Theory of Aeroelasticity written by Y C Fung and published by Courier Dover Publications. This book was released on 2008-10-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geared toward advanced undergraduates and graduate students, this outstanding text surveys aeroelastic problems, their historical background, basic physical concepts, and the principles of analysis.
Download or read book A Unified Approach to the Finite Element Method and Error Analysis Procedures written by Julian A. T. Dow and published by Elsevier. This book was released on 1998-11-09 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Unified Approach to the Finite Element Method and Error Analysis Procedures provides an in-depth background to better understanding of finite element results and techniques for improving accuracy of finite element methods. Thus, the reader is able to identify and eliminate errors contained in finite element models. Three different error analysis techniques are systematically developed from a common theoretical foundation: 1) modeling erros in individual elements; 2) discretization errors in the overall model; 3) point-wise errors in the final stress or strain results. Thoroughly class tested with undergraduate and graduate students. A Unified Approach to the Finite Element Method and Error Analysis Procedures is sure to become an essential resource for students as well as practicing engineers and researchers. New, simpler element formulation techniques, model-independent results, and error measures New polynomial-based methods for identifying critical points New procedures for evaluating sheer/strain accuracy Accessible to undergraduates, insightful to researchers, and useful to practitioners Taylor series (polynomial) based Intuitive elemental and point-wise error measures Essential background information provided in 12 appendices
Download or read book Non Classical Problems in the Theory of Elastic Stability written by Isaac Elishakoff and published by Cambridge University Press. This book was released on 2001-01-29 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: When a structure is put under an increasing compressive load, it becomes unstable and buckling occurs. Buckling is a particularly significant concern in designing shell structures such as aircraft, automobiles, ships, or bridges. This book discusses stability analysis and buckling problems and offers practical tools for dealing with uncertainties that exist in real systems. The techniques are based on two complementary theories which are developed in the text. First, the probabilistic theory of stability is presented, with particular emphasis on reliability. Both theoretical and computational issues are discussed. Secondly, the authors present the alternative to probability based on the notion of 'anti-optimization', a theory that is valid when the necessary information for probabilistic analysis is absent, that is, when only scant data are available. Design engineers, researchers, and graduate students in aerospace, mechanical, marine, and civil engineering who are concerned with issues of structural integrity will find this book a useful reference source.
Download or read book Methods of Intermediate Problems for Eigenvalues Theory and Ramifications written by A. Weinstein and published by Elsevier. This book was released on 1972-06-23 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; andmethods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory.As a result, the book represents a blend of new methods in general computational analysis,and specific, but also generic, techniques for study of systems theory ant its particularbranches, such as optimal filtering and information compression.- Best operator approximation,- Non-Lagrange interpolation,- Generic Karhunen-Loeve transform- Generalised low-rank matrix approximation- Optimal data compression- Optimal nonlinear filtering
Download or read book Bibliography of Vibration and Flutter of Aircraft Wings and Control Surfaces written by United States. Work Projects Administration and published by . This book was released on 1937 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Control written by Michael Athans and published by Courier Corporation. This book was released on 2013-04-26 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geared toward advanced undergraduate and graduate engineering students, this text introduces the theory and applications of optimal control. It serves as a bridge to the technical literature, enabling students to evaluate the implications of theoretical control work, and to judge the merits of papers on the subject. Rather than presenting an exhaustive treatise, Optimal Control offers a detailed introduction that fosters careful thinking and disciplined intuition. It develops the basic mathematical background, with a coherent formulation of the control problem and discussions of the necessary conditions for optimality based on the maximum principle of Pontryagin. In-depth examinations cover applications of the theory to minimum time, minimum fuel, and to quadratic criteria problems. The structure, properties, and engineering realizations of several optimal feedback control systems also receive attention. Special features include numerous specific problems, carried through to engineering realization in block diagram form. The text treats almost all current examples of control problems that permit analytic solutions, and its unified approach makes frequent use of geometric ideas to encourage students' intuition.
Download or read book Dynamics of Structures Third Edition written by J. Humar and published by CRC Press. This book was released on 2012-03-02 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major textbook provides comprehensive coverage of the analytical tools required to determine the dynamic response of structures. The topics covered include: formulation of the equations of motion for single- as well as multi-degree-of-freedom discrete systems using the principles of both vector mechanics and analytical mechanics; free vibration response; determination of frequencies and mode shapes; forced vibration response to harmonic and general forcing functions; dynamic analysis of continuous systems;and wave propagation analysis. The key assets of the book include comprehensive coverage of both the traditional and state-of-the-art numerical techniques of response analysis, such as the analysis by numerical integration of the equations of motion and analysis through frequency domain. The large number of illustrative examples and exercise problems are of great assistance in improving clarity and enhancing reader comprehension. The text aims to benefit students and engineers in the civil, mechanical, and aerospace sectors.
Download or read book Smart Sensors and Sensing Technology written by Gourab Sen Gupta and published by Springer Science & Business Media. This book was released on 2008-07-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological advancements in recent years have enabled the development of tiny, cheap disposable and self contained battery powered computers, known as sensor nodes or “motes”, which can accept input from an attached sensor, process this input and transmit the results wirelessly to some interested device(s). When a number of these nodes work together, conceivably up to hundreds of thousands, a Wireless Sensor Network (WSN) is formed. Research in the area of wireless sensor networks has become increasingly wid- pread in recent years, partly due to their wide range of potential uses and also partly due to the fact that the technology enabling such networks is now widely available from many di?erent suppliers, such as: Crossbow, MoteIV, Intel and SUN (java based motes). These wireless sensor networks have the potential to allow a level of integration between computers and the physical world that, to date, has been virtually impos- ble. The uses for such networks is almost limitless and include such diverse app- cations as a counter sniper system for urban warfare [1] tracking the path of a forest re [2], determining the structural stability of a building after an earthquake [3], or tracking people or objects inside a building [4], etc.
Download or read book Dynamics of Structures Second Edition written by J. Humar and published by CRC Press. This book was released on 2002-01-01 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major textbook provides comprehensive coverage of the analytical tools required to determine the dynamic response of structures. The topics covered include: formulation of the equations of motion for single- as well as multi-degree-of-freedom discrete systems using the principles of both vector mechanics and analytical mechanics; free vibration response; determination of frequencies and mode shapes; forced vibration response to harmonic and general forcing functions; dynamic analysis of continuous systems;and wave propagation analysis. The key assets of the book include comprehensive coverage of both the traditional and state-of-the-art numerical techniques of response analysis, such as the analysis by numerical integration of the equations of motion and analysis through frequency domain. The large number of illustrative examples and exercise problems are of great assistance in improving clarity and enhancing reader comprehension. The text aims to benefit students and engineers in the civil, mechanical and aerospace sectors.
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
