Download or read book Raster Data Transfer Test Using Optigraphics Produced Data MIL R 28002 Type I Raster written by and published by . This book was released on 1990 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-1840A, and its companion suite of specifications. The CTN is a DoD sponsored confederation of voluntary participants from industry and government, managed by the Air Force Logistics Command. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. To this end, testing should represent the systems and applications in use by a large number of participants. Sampling a wide cross section of industry and government will gain feedback on the various interpretations of the standards and broaden the base of industry participation in the CALS initiative.
Download or read book Raster Data Transfer Test Using Optigraphics Produced Data written by and published by . This book was released on 1990 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-1840A, and its companion suite of specifications. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. This test was conducted to allow Optigraphics to demonstrate their ability to generated a MIL-R-28002 file. The objective was to evaluate their interpretation of the MIL-R-28002 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards.
Download or read book Raster Data Transfer Test Using Optigraphics Produced Data MIL R 28OO2 Type 1 Raster Quick Short Test Report written by and published by . This book was released on 1990 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-184OA, and its companion suite of specifications. The CTN is a DoD sponsored confederation of voluntary participants from industry and government, managed by the Air Force Logistics Command. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. To this end, testing should represent the systems and applications in use by a large number of participants. Sampling a wide cross section of industry and government will gain feedback on the various interpretations of the standards and broaden the base of industry participation in the CALS initiative. This test was conducted to allow Qtigraphics to demonstrate their ability to generated a MW-R-28002 file. The objective was to evaluate their interpretation of the MIL-R-28OO2 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards. Additionally, Quick Short Test Reports (QSTRs) are intended to promote industry and government participation in the CALS initiative, developing a level of confidence in the technology and furthering mission objectives.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1991 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Raster Data Transfer Test Using DATA DEVELOPMENT Inc Produced Data MIL R 28002 Type I Raster Quick Short Test Report written by and published by . This book was released on 1992 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following test was undertaken to develop a more comprehensive understanding of the procedural issues and data structure issues surrounding a conference-floor data interchange undertaken by DATA DEVELOPMENT and the CTN at the CALS EXPO '90 in Dallas, Texas. Previous experiences with CALS data outside the CTN arena suggested that DATA DEVELOPMENT was CALS ready. A sample technical publications tape generated by DATA DEVELOPMENT was brought over to the CTN booth at CALS EXPO '90 for a 'walk-in' evaluation. The 'walk-in' test produced unexpected results. For reasons not immediately apparent, the majority of the data were not being transferred successfully. Since the hardware platform and the show environment was somewhat less than optimum for conducting an in-depth test, it was decided that a more comprehensive test should be undertaken on the CTN Raster Test Bed at the CTNO/LLNL. Since the CALS initiative is intended to develop a system independent data interchange strategy, a very important aspect of the test was to determine the reason why some systems were apparently able to interpret the transfer data and other systems were not.
Download or read book Raster Data Transfer Test Using GTX Produced Data MIL R 28OO2 Type I Raster Quick Short Test Report written by and published by . This book was released on 1990 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CIN) is conducting tests of the military standard for the Automated interchange of Technical Information, MTh-STD-1840A, and its companion suite of specifications. The CIN is a DoD sponsored confederation of voluntary participants from industry and government, managed by the Air Force Logistics Command. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. To this end, testing should represent the systems and applications in use by a large number of participants. Sampling a wide cross section of industry and government will gain feedback on the various interpretations of the standards and broaden the base of industry participation in the CALS initiative. This test was conducted to allow GTX to demonstrate their ability to generated a MlL-R-28002 data file. The objective was to evaluate their interpretation of the MIL-R-28002 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards. Additionally, Quick Short Test Reports (QSTRs) are intended to promote industry and government participation in the CALS initiative, developing a level of confidence in the technology and furthering mission objectives.
Download or read book Raster Data Transfer Test Using Formtek Produced Data MIL R 28OO2 Type 1 Raster Quick Short Test Report written by and published by . This book was released on 1990 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-1840A, and its companion suite of specifications. The CTN is a DoD sponsored confederation of voluntary participants from industry and government, managed by the Air Force Logistics Command. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. To this end, testing should represent the systems and applications in use by a large number of participants. Sampling a wide cross section of industry and government will gain feedback on the various interpretations of the standards and broaden the base of industry participation in the CALS initiative. This test was conducted to allow Formtek to demonstrate their ability to generated a MIL-R-28002 data file. The objective was to evaluate their interpretation of the MIL-R-28OO2 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards. Additionally, Quick Short Test Reports (QSTRs) are intended to promote industry and government participation in the CALS initiative, developing a level of confidence in the technology and furthering mission objectives.
Download or read book Raster Transfer Test Using Image Memory Systems Inc MIL R 28002 Raster Quick Short Test Report written by and published by . This book was released on 1992 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the informal test reported in this QSTR was to analyze Image Memory Systems interpretation and use of the CALS Standards in generating raster data. Image Memory Systems used its CALS Raster Technical Data System to produce data in accordance with the standards and delivered it to the CTN technical staff on a floppy disk. The test was to evaluate the raster data files and not the transfer media.
Download or read book Raster Data Transfer Test Using GTX Produced Data written by and published by . This book was released on 1990 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-1840A, and its companion suite of specifications. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. This test was conducted to allow GTX to demonstrate their ability to generated a MIL-R-28002 data file. The objective was to evaluate their interpretation of the MIL-R-28002 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards.
Download or read book Raster Data Transfer Test Using Formtek Produced Data written by and published by . This book was released on 1990 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DoD Computer-aided Acquisition and Logistics Support (CALS) Test Network (CTN) is conducting tests of the military standard for the Automated interchange of Technical Information, MIL-STD-1804A, and its companion suite of specifications. The CTN is a DoD sponsored confederation of voluntary participants from industry and government, managed by the Air Force Logistics Command. The primary purpose of the CTN is to evaluate the effectiveness of the CALS standards for technical data interchange and to demonstrate the capability and operational suitability of these standards. To this end, testing should represent the systems and applications in use by a large number of participants. Sampling a wide cross section of industry and government will gain feedback on the various interpretations of the standards and broaden the base of industry participation in the CALS initiative. This test was conducted to allow Formtek to demonstrate their ability to generated a MIL-R-28002 data file. The objective was to evaluate their interpretation of the MIL-R-28002 standard thereby assist the CTN in substantiating the validity of the standards or recommending changes to these standards and the references to national or international standards. Additionally, Quick Short Test Reports (QSTRs) are intended to promote industry and government participation in the CALS initiative, developing a level of confidence in the technology and furthering mission objectives.
Download or read book CALS Publications written by United States. National Technical Information Service and published by . This book was released on 1994 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1991 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Raster Transfer Using Harris Corporation s Data MIL R 28002A Raster Quick Short Test Report written by and published by . This book was released on 1993 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the informal test, reported in this QSTR, was to analyze Harris Corporation's interpretation and use of the CALS standards in transferring technical Raster image data. Harris used their CALS Technical Data Interchange System to produce data, in accordance with the standards, and delivered it to the AFCTN technical staff on a 9-track magnetic tape.
Download or read book Raster Transfer Test Using Image Memory Systems Data MIL R 28002A Raster Quick Short Test Report written by and published by . This book was released on 1992 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the informal test reported in this QSTR was to analyze Image Memory Systems' interpretation and use of the CALS standards in transferring raster data. Image Memory Systems used its CALS Technical Data Interchange System to produce data in accordance with the standards and delivered it to the AFCTN technical staff on a 9-track magnetic tape.
Download or read book Raster Transfer Test Using Raytheon Company s Data MIL R 28002A Raster Quick Short Test Report written by and published by . This book was released on 1992 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the informal test, reported in this QSTR, was to analyze Raytheon Company's interpretation and use of the CALS standards in transferring technical publication data. Raytheon used its CALS Technical Data Interchange System to produce data, in accordance with the standards, and delivered it to the AFCTN technical staff on a 9-track magnetic tape.
Download or read book Annual Report 1989 90 written by New Brunswick. Department of Transportation and published by . This book was released on 1991 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: General activity review of associated branches and agencies to the Department which includes corporate securities registrations, a list of tenders received, and general financial data. Branches and agencies reviewed are responsible for motor vehicle activity, highway construction, traffic engineering, telecommunications and public utilities.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1991 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: