Download or read book Rapid Prototyping Principles And Applications 2nd Edition With Companion Cd rom written by Chee Kai Chua and published by World Scientific Publishing Company. This book was released on 2003-03-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping (RP) has revolutionized the landscape of how prototypes and products are made and small batch manufacturing carried out. This book gives a comprehensive coverage of RP and rapid tooling processes, data formats and applications. A CD-ROM, included in the book, presents RP and its principles in an interactive way to augment the learning experience.Special features:
Download or read book Rapid Prototyping written by Andreas Gebhardt and published by Hanser Gardner Publications. This book was released on 2003 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping technology has become a powerful tool for rapid product development in almost every branch of industry. Many new and upcoming processes offer means for the fast creation of models with steadily increasing accuracy, build speed, model properties, and economic advantages. This book encourages engineers to incorporate rapid prototyping in their daily routine. It illustrates the benefits that come with the use of models at any stage of the product development process and defines the different types of models. It covers the fundamentals of rapid prototyping and the special capabilities of prototypers. It shows how digital production based on low volume rapid prototyped samples can be realized.
Download or read book User s Guide to Rapid Prototyping written by Todd Grimm and published by Society of Manufacturing Engineers. This book was released on 2004 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a baseline of rapid prototyping technologies to guide users and business leaders through the evaluation, justification, and implementation process. Rapid prototyping is a powerful tool for design, engineering and manufacturing, and is used in nearly every industry that manufactures mechanical components. This book fills the knowledge gap for the industry novice through an in-depth analysis of the various rapid prototyping technologies and processes. It also covers the technology's strengths, limitations, benefits and associated costs to aid the decision making process. Also included are comparisons to other processes such as CNC machining. In an age where better, faster, cheaper is the mantra for product development, this book offers invaluable information that will help you decide if rapid prototyping is the right tool to solve your specific design and manufacturing challenges.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book Rapid Prototyping of Biomaterials written by Roger Narayan and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping of Biomaterials: Principles and Applications provides a comprehensive review of established and emerging rapid prototyping technologies (such as bioprinting) for medical applications. Rapid prototyping, also known as layer manufacturing, additive manufacturing, solid freeform fabrication, or 3D printing, can be used to create complex structures and devices for medical applications from solid, powder, or liquid precursors. Following a useful introduction, which provides an overview of the field, the book explores rapid prototyping of nanoscale biomaterials, biosensors, artificial organs, and prosthetic limbs. Further chapters consider the use of rapid prototyping technologies for the processing of viable cells, scaffolds, and tissues. With its distinguished editor and international team of renowned contributors, Rapid Prototyping of Biomaterials is a useful technical resource for scientists and researchers in the biomaterials and tissue regeneration industry, as well as in academia. - Comprehensive review of established and emerging rapid prototyping technologies (such as bioprinting) for medical applications - Chapters explore rapid prototyping of nanoscale biomaterials, biosensors, artificial organs, and prosthetic limbs - Examines the use of rapid prototyping technologies for the processing of viable cells, scaffolds, and tissues
Download or read book Rapid Manufacturing written by Duc Pham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is an exciting new technology used to create physical models and functional prototypes directly from CAD models. Rapid tooling concerns the production of tooling using parts manufactured by rapid prototyping. The book describes the characteristics and capabilities of the main known rapid prototyping processes. It covers in detail various commercially available processes such as: Stereolithography (SLA), Selective Laser Sintering (SLS), and others. The text places a strong emphasis on practical applications and contains an abundance of photographs and diagrams to illustrate clearly the principles of the machines and processes involved.
Download or read book Engineering Design and Rapid Prototyping written by Ali K. Kamrani and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Engineering Design and Rapid Prototyping" offers insight into the methods and techniques that allow for easily implementing engineering designs by incorporating advanced methodologies and technologies. This book contains advanced topics such as feature-based design and process planning, modularity and rapid manufacturing, along with a collection of the latest methods and technologies currently being utilized in the field. The volume also: -Provides axiomatic design and solution methodologies for both design and manufacturing -Discusses product life cycle development and analysis for ease of manufacture and assembly -Offers applied methods and technologies in rapid prototyping, tooling and manufacturing "Engineering Design and Rapid Prototyping" will be extremely valuable for any engineers and researchers and students working in engineering design.
Download or read book Rapid Prototyping written by Patri K. Venuvinod and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the dawn of civilization, mankind has been engaged in the conception and manufacture of discrete products to serve the functional needs of local customers and the tools (technology) needed by other craftsmen. In fact, much of the progress in civilization can be attributed to progress in discrete product manufacture. The functionality of a discrete object depends on two entities: form, and material composition. For instance, the aesthetic appearance of a sculpture depends upon its form whereas its durability depends upon the material composition. An ideal manufacturing process is one that is able to automatically generate any form (freeform) in any material. However, unfortunately, most traditional manufacturing processes are severely constrained on all these counts. There are three basic ways of creating form: conservative, subtractive, and additive. In the first approach, we take a material and apply the needed forces to deform it to the required shape, without either adding or removing material, i. e. , we conserve material. Many industrial processes such as forging, casting, sheet metal forming and extrusion emulate this approach. A problem with many of these approaches is that they focus on form generation without explicitly providing any means for controlling material composition. In fact, even form is not created directly. They merely duplicate the external form embedded in external tooling such as dies and molds and the internal form embedded in cores, etc. Till recently, we have had to resort to the 'subtractive' approach to create the form of the tooling.
Download or read book Rapid Prototyping Manufacturing written by Paul Francis Jacobs and published by Society of Manufacturing Engineers. This book was released on 1992 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This turnkey technology source provides an introduction to rapid prototyping and manufacturing (RP&M) with emphasis on Stereolithography which represents the majority of all rapid prototyping systems currently in place. The content is based on theory, analysis and experiment with extensive test data, including select case studies from the automotive, simultaneous engineering, and medical sectors.
Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o
Download or read book Rapid System Prototyping with FPGAs written by R. C. Cofer and published by Elsevier. This book was released on 2006 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reading this guide will take a designer with a basic knowledge of FPGAs to the next level of FPGA implementation."--Jacket.
Download or read book Rapid Prototyping written by Chee Kai Chua and published by World Scientific. This book was released on 2003 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the fundamental theories and applications of rapid prototyping and traces its development in the arena of advanced manufacturing technologies.
Download or read book Direct Write Technologies for Rapid Prototyping Applications written by Alberto Pique and published by Academic Press. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct-Write Technologies covers applications, materials, and the techniques in using direct-write technologies. This book provides an overview of the different direct write techniques currently available, as well as a comparison between the strengths and special attributes for each of the techniques. The techniques described open the door for building prototypes and testing materials. The book also provides an overview of the state-of-the-art technology involved in this field. Basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. Others in this or related fields will want the book to read the introductory material summarizing isuses common to all approaches, in order to compare and contrast different techniques. Everyday applications include electronic components and sensors, especially chemical and biosensors. There is a wide range of research and development problems requiring state-of-the-art direct write tools. This book will appeal to basic researchers and development engineers in university engineering departments and at industrial and national research laboratories. This text should appeal equally well in the United States, Asia, and Europe. Both basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. An overview of the different direct write techniques currently available A comparison between the strengths and special attributes for each of the techniques An overview of the state-of-the-art technology involved in this field
Download or read book Rapid Prototyping and Engineering Applications written by Fuewen Frank Liou and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book Rapid Prototyping Rapid Tooling and Reverse Engineering written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-06-08 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the role of Rapid Prototyping Techniques within the product development phase. It deals with the concept, origin, and working cycle of Rapid Prototyping Processes with emphasis on the applications. Apart from elaboration of engineering and non-engineering applications, it highlights recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models. Special emphasis has been provided to the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence the book also elaborates on the mass manufacturing of rapid prototyped products. This includes casting and rapid tooling. The book concludes with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. With globalization of market and advances in science and technology, the life span of products has shortened considerably. For early realization of products and short development period, engineers and researchers are constantly working together for more and more efficient and effective solutions. The most effective solution identified has been usage of computers in both designing and manufacturing. This gave birth to the nomenclatures CAD (Computer Aided Designing) and CAM (Computer aided Manufacturing). This was the initiation that ensured short product development and realization period. Researchers coined the concept as Rapid Prototyping. In contrast to Prototyping, Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive or subtractive layer manufacturing" technology. The first methods for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus for early product realization or physical products for actual testing. This book is expected to contain Seven Chapters. Chapter 1 would explain product life cycle and the product development phase in the same, introducing role of Rapid Prototyping Techniques in Product development phase. Chapter 2 would deals with the concept, origin and working cycle of Rapid Prototyping Processes. Chapter 3 would concentrates on the applications of Rapid Prototyping Technology. Apart from elaboration of engineering and non-engineering applications, it also elaborates on recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models etc. Chapter 4 would introduce the various Rapid Prototyping systems available worldwide. The chapter also introduces the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS hence ensuring low rejection rate by human body. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence Chapter 5 would elaborates on the mass manufacturing of rapid prototyped products. This includes Casting and Rapid Tooling. Chapter 6 would deal with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. As the product realization is primarily dependent on various softwares which are required to be understood for better accuracy so the concluding chapter of the book i.e. Chapter 7 would explain some software associated with the various techniques.
Download or read book Modeling Synthesis and Rapid Prototyping with the Verilog HDL written by Michael D. Ciletti and published by Pearson. This book was released on 1999 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Verilog aims to introduce new users to the language of Verilog with instruction on how to write hardware descriptions in Verilog in a style that can be synthesized by readily available synthesis tools. Offers clear exposition of the Verilog hardware description language. This book is written in a style that allows the user who has no previous background with hardware description languages (HDLs) to become skillful with the language. Features treatment of synthesis-friendly descriptive styles. An excellent book for self-study, reference, seminars, and workshops on the subject.
