Download or read book Rapid Predictive Modeling for High Frequency Interconnect on Low Cost Substrates written by Jaemin Shin and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, a predictive (scalable) measurement-based PEEC modeling method for high-frequency interconnects on low-cost FR4 substrates is proposed and demonstrated. The interconnects are modeled with equivalent circuits of scalable building blocks using a rapid and accurate optimization method to fit parameter data up to 10 GHz. The predictive power of the developed scalable models is demonstrated in several extended interconnect structures and the ability to use interpolation to predict the high frequency performance of structures with differently sized building blocks is demonstrated. The usefulness of the proposed modeling method is validated by comparing predictions to measurements both in frequency domain and in time domain. The efficiency and accuracy of the method are also compared with the Advanced Design System (ADS) momentum simulation tool. The results show that this proposed high-frequency interconnect modeling method is very much more efficient in terms of simulation time, while maintaining comparable accuracy, compared to momentum simulations and measured behavior.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2009 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Millimeter wave Technologies written by Duixian Liu and published by John Wiley & Sons. This book was released on 2009-03-03 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains one of the hottest topics in wireless and electronic devices community, namely the wireless communication at mmWave frequencies, especially at the 60 GHz ISM band. It provides the reader with knowledge and techniques for mmWave antenna design, evaluation, antenna and chip packaging. Addresses practical engineering issues such as RF material evaluation and selection, antenna and packaging requirements, manufacturing tolerances, antenna and system interconnections, and antenna One of the first books to discuss the emerging research and application areas, particularly chip packages with integrated antennas, wafer scale mmWave phased arrays and imaging Contains a good number of case studies to aid understanding Provides the antenna and packaging technologies for the latest and emerging applications with the emphases on antenna integrations for practical applications such as wireless USB, wireless video, phase array, automobile collision avoidance radar, and imaging
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Design of Electromagnetic Compatibility for High Speed Printed Circuit Boards and Packaging written by Xing-Chang Wei and published by CRC Press. This book was released on 2017-09-19 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Design of Electromagnetic Compatibility for High-Speed Printed Circuit Boards and Packaging presents the electromagnetic modelling and design of three major electromagnetic compatibility (EMC) issues related to the high-speed printed circuit board (PCB) and electronic packages: signal integrity (SI), power integrity (PI), and electromagnetic interference (EMI). The emphasis is put on two essential passive components of PCBs and packages: the power distribution network and the signal distribution network. This book includes two parts. Part one talks about the field-circuit hybrid methods used for the EMC modeling, including the modal method, the integral equation method, the cylindrical wave expansion method and the de-embedding method. Part two illustrates EMC design methods and explores the applications of novel metamaterials and two-dimensional materials on traditional EMC problems. This book is designed to enhance worthwhile electromagnetic theory and mathematical methods for practical engineers and to train students with advanced EMC applications.
Download or read book Foundations for Microstrip Circuit Design written by Terry C. Edwards and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.
Download or read book Advances in Electronic Packaging written by and published by . This book was released on 1997 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Symposium on Microelectronics written by and published by . This book was released on 2002 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Speed Signaling written by Kyung Suk (Dan) Oh and published by Prentice Hall. This book was released on 2011-10-07 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: New System-Level Techniques for Optimizing Signal/Power Integrity in High-Speed Interfaces--from Pioneering Innovators at Rambus, Stanford, Berkeley, and MIT As data communication rates accelerate well into the multi-gigahertz range, ensuring signal integrity both on- and off-chip has become crucial. Signal integrity can no longer be addressed solely through improvements in package or board-level design: Diverse engineering teams must work together closely from the earliest design stages to identify the best system-level solutions. In High-Speed Signaling, several of the field’s most respected practitioners and researchers introduce cutting-edge modeling, simulation, and optimization techniques for meeting this challenge. Edited by pioneering experts Drs. Dan Oh and Chuck Yuan, these contributors explain why noise and jitter are no longer separable, demonstrate how to model their increasingly complex interactions, and thoroughly introduce a new simulation methodology for predicting link-level performance with unprecedented accuracy. The authors address signal integrity from architecture through high-volume production, thoroughly discussing design, implementation, and verification. Coverage includes New advances in passive-channel modeling, power-supply noise and jitter modeling, and system margin prediction Methodologies for balancing system voltage and timing budgets to improve system robustness in high-volume manufacturing Practical, stable formulae for converting key network parameters Improved solutions for difficult problems in the broadband modeling of interconnects Equalization techniques for optimizing channel performance Important new insights into the relationships between jitter and clocking topologies New on-chip measurement techniques for in-situ link performance testing Trends and future directions in signal integrity engineering High-Speed Signaling thoroughly introduces new techniques pioneered at Rambus and other leading high-tech companies and universities: approaches that have never before been presented with this much practical detail. It will be invaluable to everyone concerned with signal integrity, including signal and power integrity engineers, high-speed I/O circuit designers, and system-level board design engineers.
Download or read book Fundamentals of Electromigration Aware Integrated Circuit Design written by Jens Lienig and published by Springer. This book was released on 2018-02-23 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive overview of electromigration and its effects on the reliability of electronic circuits. It introduces the physical process of electromigration, which gives the reader the requisite understanding and knowledge for adopting appropriate counter measures. A comprehensive set of options is presented for modifying the present IC design methodology to prevent electromigration. Finally, the authors show how specific effects can be exploited in present and future technologies to reduce electromigration’s negative impact on circuit reliability.
Download or read book 2002 International Symposium on Microelectronics written by and published by . This book was released on 2002 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Metals 2014 written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2014 collection includes papers from the following symposia: •Alumina and Bauxite •Aluminum Alloys: Fabrication, Characterization and Applications •Aluminum Processing •Aluminum Reduction Technology •Cast Shop for Aluminum Production •Electrode Technology for Aluminum Production •Light-metal Matrix (Nano)-composites
Download or read book Integrated Circuit and System Design written by Enrico Macii and published by Springer. This book was released on 2004-08-24 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: WelcometotheproceedingsofPATMOS2004,thefourteenthinaseriesofint- national workshops. PATMOS 2004 was organized by the University of Patras with technical co-sponsorship from the IEEE Circuits and Systems Society. Over the years, the PATMOS meeting has evolved into an important - ropean event, where industry and academia meet to discuss power and timing aspects in modern integrated circuit and system design. PATMOS provides a forum for researchers to discuss and investigate the emerging challenges in - sign methodologies and tools required to develop the upcoming generations of integrated circuits and systems. We realized this vision this year by providing a technical program that contained state-of-the-art technical contributions, a keynote speech, three invited talks and two embedded tutorials. The technical program focused on timing, performance and power consumption, as well as architectural aspects, with particular emphasis on modelling, design, charac- rization, analysis and optimization in the nanometer era. This year a record 152 contributions were received to be considered for p- sible presentation at PATMOS. Despite the choice for an intense three-day m- ting, only 51 lecture papers and 34 poster papers could be accommodated in the single-track technical program. The Technical Program Committee, with the - sistance of additional expert reviewers, selected the 85 papers to be presented at PATMOS and organized them into 13 technical sessions. As was the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were received per manuscript.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Methodology of Tree Microstrip Interconnects Modelling For Signal Distribution written by Blaise Ravelo and published by Springer Nature. This book was released on 2019-11-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the modelling methodology of microstrip interconnects, discussing various structures of single-input multiple-output (SIMO) tree interconnects for signal integrity (SI) engineering. Further, it describes lumped and distributed transmission line elements based on single-input single-output (SIMO) models of symmetric and asymmetric trees, and investigates more complicated phenomenon, such as interbranch coupling. The modelling approaches are based on the analytical methods using the Z-, Y- and T-matrices. The established method enables the S-parameters and voltage transfer function of SIMO tree to be determined. Providing illustrative results with frequency and time domain analyses for each tree interconnect structure, the book is a valuable resource for researchers, engineers, and graduate students in fields of analogue, RF/microwave, digital and mixed circuit design, SI and manufacturing engineering.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1994 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
