Download or read book Raman Study of Uncoated and P BN SiC Coated Hi Nicalon Reinforced Celsian Matrix Composites written by and published by . This book was released on 2000 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Raman Study of Uncoated and P BN SiC Coated Hi Nicalon Fiber Reinforced Celsian Matrix Composites written by Gwénaël Gouadec and published by . This book was released on 2000 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hi-Nicalon fiber reinforced celsian matrix composites were characterized by Raman spectroscopy and imaging, using several laser wavelengths. Composite #1 is reinforced by as-received fibers while coatings of p-BN and SiC protect the fibers in composite #2. The matrix contains traces of the hexagonal phase of celsian, which is concentrated in the neighborhood of fibers in composite #1. Some free silicon was evident in the coating of composite #2 which might involve a {BN + SiC yields BNC + Si} 'reaction' at the p-BN/SiC interface. Careful analysis of C-C peaks revealed no abnormal degradation of the fiber core in the composites.
Download or read book Raman Study of Uncoated and P Bn Sic Coated Hi Nicalon Reinforced Celsian Matrix Composites Part 2 Residual Stress in the Fibers written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-16 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Band shifts on Raman spectra were used to assess, at a microscopic scale, the residual strain existing in Hi-Nicalon fibers reinforcing celsian matrix composites. Uncoated as well as p-BN/SiC- and p-B(Si)N/SiC-coated Hi-Nicalon fibers were used as the reinforcements. We unambiguously conclude that the fibers are in a state of compressive residual stress. Quantitative determination of the residual stress was made possible by taking into account the heating induced by laser probing and by using a reference line, of fixed wavenumber. We found fiber compressive residual stress values between 110 and 960 MPa depending on the fiber/matrix coating in the composite. A stress relaxation-like phenomenon was observed at the surface of p-BN/SiC-coated Hi-Nicalon fibers whereas the uncoated or p-B(Si)N/SiC-coated Hi-Nicalon fibers did not show any stress relaxation in the Celsian matrix composites. Gouadec, Gwenael and Colomban, Philippe and Bansal, Narottam P. Glenn Research Center NASA/TM-2000-210456, E-12441, NAS 1.15:210456
Download or read book Advances in Ceramic matrix Composites written by and published by . This book was released on 2001 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drugs During Pregnancy and Lactation written by H. Garbis and published by Elsevier Science. This book was released on 2001-12-21 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The care of pregnant women presents one of the paradoxes of modern medicine. Women usually require little medical intervention during an (uneventful) pregnancy. Conversely, those at high risk of damage to their own health or that of their unborn require the help of appropriate medicinal technology, including drugs. Accordingly, there are two classes of pregnant women, the larger group requires support but not much intervention, while the other needs the full range of diagnostic and therapeutic measures applied in any other branch of medicine. This book presents the current state of knowledge about drugs in pregnancy. In each chapter information is presented separately for two different aspects of the problem seeking a drug appropriate for prescription during pregnancy, and assessing the risk of a drug when exposure has already taken place. Practising clinicians who prescribe medicinal products to women who are, or who may become, pregnant, will find this volume an invaluable reference.
Download or read book Annales de chimie science des mat riaux written by and published by . This book was released on 2005 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Raman Study of Uncoated and P Bn Sic Coated Hi Nicalon Fiber Reinforced Celsian Matrix Composites Part 1 Distribution and Nanostructure of Different written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-26 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hi-Nicalon fiber reinforced celsian matrix composites were characterized by Raman spectroscopy and imaging, using several laser wavelengths. Composite #1 is reinforced by as-received fibers while coatings of p-BN and SiC protect the fibers in composite #2. The matrix contains traces of the hexagonal phase of celsian, which is concentrated in the neighborhood of fibers in composite #1. Some free silicon was evident in the coating of composite #2 which might involve a {BN + SiC yields BNC + Si} "reaction" at the p-BN/SiC interface. Careful analysis of C-C peaks revealed no abnormal degradation of the fiber core in the composites. Gouadec, Gwenael and Colomban, Philippe and Bansal, Narottam P. Glenn Research Center NASA/TM-2000-210349, NAS 1.15:210349, E-12398
Download or read book Ceramic Materials and Components for Engines written by Jürgen G. Heinrich and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.
Download or read book Ceramic Matrix Composites written by Walter Krenkel and published by John Wiley & Sons. This book was released on 2008-06-23 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering an important material class for modern applications in the aerospace, automotive, energy production and creation sectors, this handbook and reference contains comprehensive data tables and field reports on successfully developed prototypes. The editor and authors are internationally renowned experts from NASA, EADS, DLR, Porsche, MT Aerospace, as well as universities and institutions in the USA, Europe and Japan, and they provide here a comprehensive overview of current R & D with an application-oriented emphasis.
Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.
Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.
Download or read book Ceramic Matrix Composites written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2017-06-29 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth volume of this six-volume compendium publishes technical guidance and properties on ceramic matrix composite material systems. The selected guidance on technical topics related to this class of composites includes material selection, processing, characterization, testing, data reduction, design, analysis, quality control, application, case histories, and lessons learned of typical ceramic matrix composite materials. Volume 5, which covers ceramic matrix composites, supersedes MIL-HDBK-17-5 of June 17, 2002. The Composite Materials Handbook, referred to by industry groups as CMH-17, is an engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.
Download or read book Fundamentals of Gas Dynamics written by Howard W. Emmons and published by Princeton University Press. This book was released on 2015-12-08 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume II of the High Speed Aerodynamics and Jet Propulsion series. The series which stress the more fundamental aspects of the various phenomena that make up the broad field of aeronautical science. The aerodynamicist and gas dynamicist will find both the classical and the important new concepts of gas dynamics presented in an informative and stimulating manner. Specialists in the study of gas dynamics have contributed Sections as follows: H. S. Tsien, The Equations of Gas Dynamics; L. Crocco, One-Dimensional Treatment of Steady Gas Dynamics; A. Kantrowitz, One-Dimensional Treatment of Nonsteady Gas Dynamics; W. Hayes, The Basic Theory of Gasdynamic Discontinuities; H. Polachek and R. J. Seeger, Shock Wave Interactions; H. G. Stever, Condensation Phenomena in High Speed Flows; T. H. Von Karman, H. W. Emmons, G. I. Taylor, and R. S. Tankin, Gas Dynamics of Combustion and Detonation; S. Schaaf and P. Chambre, Flow of Rarefied Gases. Originally published in 1958. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo
Download or read book Fiber Reinforced Ceramic Composites written by K.S. Mazdiyasni and published by William Andrew. This book was released on 1990-12-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the first comprehensive treatment of continuous and discontinuous ceramic fiber and whisker reinforced ceramic composites, written by 29 authorities in the field.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.
