Download or read book Antenna Design Solutions for RFID Tags Based on Metamaterial Inspired Resonators and Other Resonant Structures written by Simone Zuffanelli and published by Springer. This book was released on 2017-09-22 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes innovative design solutions for radio-frequency identification (RFID) tags and antennas. Focusing mainly on passive ultra-high-frequency (UHF)-RFID tag antennas, it examines novel approaches based on the use of metamaterial-inspired resonators and other resonant structures as radiating elements. It also offers an exhaustive analysis of the radiation properties of several metamaterial-inspired resonators such as the split ring resonator (SRR) and related structures. Further, it discusses in detail an innovative technology for the RFID tagging of optical discs, which has demonstrated a significant improvement over the state of the art and resulted in a patent. By covering the entire research cycle of theory, design/simulation and fabrication/evaluation of RFID tags and antennas, while also reporting on cutting-edge technologies, the book provides graduate students, researchers and practitioners alike with a comprehensive and timely overview of RFID systems, and a closer look at several radiating structures.
Download or read book Radio Frequency Identification written by Paulo Crepaldi and published by BoD – Books on Demand. This book was released on 2017-11-29 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-frequency identification (RFID) is one of the modern names that is becoming increasingly popular, as a result of many years of researches and investigations. Powerful hardware and software tools have contributed, and still do, to place the radio-frequency identification as a popular and widely used technology, from large corporations to individuals, and custom applications. Although RFID offers many advantages over other technologies, it is essential to be aware of its limitations. Therefore, it will be possible to overcome the limitations and to increase its applications. As an example, cost, safety, security, transmissions formats, and international standards are important merit figures of continuous improvement. In this book, we present important proposals that will certainly contribute to the evolution of RFID. Theoretical and practical aspects are presented and discussed by the authors, and thus we invite everyone for a pleasant reading.
Download or read book Advanced Radio Frequency Identification Design and Applications written by Stevan Preradovic and published by BoD – Books on Demand. This book was released on 2011-03-22 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) is a modern wireless data transmission and reception technique for applications including automatic identification, asset tracking and security surveillance. This book focuses on the advances in RFID tag antenna and ASIC design, novel chipless RFID tag design, security protocol enhancements along with some novel applications of RFID.
Download or read book Handbook of Smart Antennas for RFID Systems written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2011-02-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Smart Antennas for RFID Systems is a single comprehensive reference on the smart antenna technologies applied to RFID. This book will provide a timely reference book for researchers and students in the areas of both smart antennas and RFID technologies. It is the first book to combine two of the most important wireless technologies together in one book. The handbook will feature chapters by leading experts in both academia and industry offering an in-depth description of terminologies and concepts related to smart antennas in various RFID systems applications. Some topics are: adaptive beamforming for RFID smart antennas, multiuser interference suppression in RFID tag reading, phased array antennas for RFID applications, smart antennas in wireless systems and market analysis and case studies of RFID smart antennas. This handbook will cover the latest achievements in the designs and applications for smart antennas for RFID as well as the basic concepts, terms, protocols, systems architectures and case studies in smart antennas for RFID readers and tags.
Download or read book Ultra Wideband Radio Frequency Identification Systems written by Faranak Nekoogar and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-wideband Radio Frequency Identification Systems describes the essentials of radio frequency identification (RFID)systems as well as their target markets. The book covers a study of commercially available RFID systems and characterizes their performance in terms of read range and reliability in the presence of conductive and dielectric materials. The capabilities and limitations of commercial RFID systems are reported followed by comprehensive discussions of the advantages and challenges of using ultra-wideband (UWB) technology for tag/reader communications. The book presents practical aspects of RFID system such as: EPC global and ISO standards, implementation, and target markets in a simple and easy to understand language.
Download or read book Chipless and Conventional Radio Frequency Identification Systems for Ubiquitous Tagging written by Chandra Karmakar, Nemai and published by IGI Global. This book was released on 2012-05-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) is a wireless tracking and data capturing technique for automatic identification, tracking, security surveillance, logistics, and supply chain management. RFID tags, which have been successfully employed in many industries including retail and healthcare, have provided a multitude of benefits but also currently remain very costly. Chipless and Conventional Radio Frequency Identification: Systems for Ubiquitous Tagging explores the use of conventional RFID technology as well as chipless RFID technology, which provides a cheaper method of implementation, opening many doors for a variety of applications and industries. This practical reference, designed for researchers and practitioners, investigates the growing field of RFID and its promising future.
Download or read book Radio Frequency Identification Antennas written by Hend Abd-El Azem Malhat and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces a design of different antennas for RFID tag and readers. A fractal dipole antenna for passive UHF RFID applications has been proposed. The antenna is simple and has good impedance matching with the chip impedance. A curved dual-band ring dielectric resonator tag antenna has been presented. The radiation characteristics and backscattering from the tag antenna in free space, mounted on cylindrical bottle and mounted on spherical bottle have been considered. The book proposes and studies the parameters of an OFHA for handheld UHF RFID reader. an elliptical dielectric resonator antenna fed by single feed with rectangular ground is proposed for radio frequency identification (RFID) reader operating at center frequency of 5.8 GHz.The effects of the presence of portable reader device and human hand on the radiation characteristics of the antenna are investigated.An 8x8 NF-focused EDRA phased array for fixed RFID reader applications is investigated. The NF-focused array introduces a focused spot area with diameter of 13.7 cm and SLL of -16 dB so representing a valuable solution in realistic applications."
Download or read book Antennas for Radio Frequency Identification Systems written by Madhurima Maddela and published by . This book was released on 2004 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Radio Frequency Identification RFID and RFID enabled Sensors on Flexible Low Cost Substrates written by Li Yang and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step discussion of the design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates for UHF frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. Table of Contents: Radio Frequency Identification Introduction / Flexible Organic Low Cost Substrates / Benchmarking RFID Prototypes on Organic Substrates / Conformal Magnetic Composite RFID Tags / Inkjet-Printed RFID-Enabled Sensors
Download or read book Radio Frequency Identification RFID Tags and Reader Antennas Based on Conjugate Matching and Metamaterial Concepts written by Gerard Zamora González and published by . This book was released on 2013 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: La identificación por radiofrecuencia (RFID) es una tecnología de rápido desarrollo que proporciona la identificación inalámbrica y capacidad de seguimiento mediante el uso de dispositivos simples que se usan para etiquetar objetos o personas en un extremo, llamados etiquetas o tags, y dispositivos más complejos en el otro extremo del enlace, denominados lectores. RFID es una tecnología emergente y uno de los segmentos de más rápido crecimiento de la actual industria de la identificación automática y captura de datos (AIDC). RFID es utilizada por cientos, si no miles, de aplicaciones en la actualidad. RFID está revolucionando la gestión de las cadenas de suministro, en sustitución de los códigos de barras, pasando a ser el sistema de seguimiento de objetos principal, y se está convirtiendo rápidamente en una tecnología rentable. Sin embargo, el diseño de etiquetas capaces de cubrir todas las bandas UHF-RFID reguladas, proporcionando unas prestaciones de lectura adecuadas, supone un reto importante. Además, hay una falta de sistematización en la metodología de diseño de etiquetas UHF-RFID. Otro problema que impide una expansión más rápida de la tecnología UHF-RFID se encuentra en la gestión de artículos de venta al por menor, en la dificultad de ofrecer al mismo tiempo la posibilidad de controlar el pago los artículos en las tiendas y el inventario de elementos presentes en el almacén. La reducción de costes es de especial preocupación en la implementación de sistemas RFID de microondas, ya que estos sistemas suelen utilizar etiquetas activas cuyo consumo de energía debe ser reducido al mínimo. El objetivo principal de esta tesis es aportar soluciones a los problemas mencionados anteriormente, contribuyendo de este modo al progreso y mejora de la tecnología RFID. Esto se consigue mediante la propuesta de nuevas estrategias y una metodología simple para el diseño de las etiquetas de UHF-RFID basadas en adaptación conjugada, y antenas para lectores RFID basadas en conceptos de metamateriales.
Download or read book Radio Frequency Identification and Sensors written by Etienne Perret and published by John Wiley & Sons. This book was released on 2014-12-04 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, conversely, making them sensitive in order to produce sensors, meanwhile keeping their unique ID. The RFID advantages are discussed, along with its numerous features, and comparisons with the barcode technology are presented. After that, the new chipless RFID technology is introduced on the basis of the previous conclusions. Original technological approaches are introduced and discussed in order to demonstrate the practical and economic potential of the chipless technology.
Download or read book The RF in RFID written by Daniel Dobkin and published by Newnes. This book was released on 2012-11-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how UHF tags and readers communicate wirelessly. It gives an understanding of what limits the read range of a tag, how to increase it (and why that might result in breaking the law), and the practical things that need to be addressed when designing and implementing RFID technology. Avoiding heavy math but giving breadth of coverage with the right amount of detail, it is an ideal introduction to radio communications for engineers who need insight into how tags and readers work. New to this edition: • Examples of near-metal antenna techniques • Discussion of the wakeup challenge for battery-assisted tags, with a BAT architecture example • Latest development of protocols: EPC Gen 1.2.0 • Update 18000-6 discussion with battery-assisted tags, sensor tags, Manchester tags and wakeup provisions - Named a 2012 Notable Computer Book for Computer Systems Organization by Computing Reviews - The only book to give an understanding of radio communications, the underlying technology for radio frequency identification (RFID) - Praised for its readability and clarity, it balances breadth and depth of coverage - New edition includes latest developments in chip technology, antennas and protocols
Download or read book Antennas for Small Mobile Terminals written by Kyohei Fujimoto and published by Artech House. This book was released on 2018-09-30 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the progress and rapid increase in mobile terminals, the design of antennas for these small systems is becoming more and more important. This forward-looking volume offers professionals current and comprehensive coverage of the design, development, and implementation of small, compact, and lightweight antennas in mobile communication terminals. The book discusses a wide range of communication systems, from Radio-frequency identification (RFID), and near field communications (NFC), to wireless power transmission (WPT) and broadband wireless networks. Engineers learn how to use small antennas in mobile phones, wearable systems, laptop computers, radio watches, and broadband wireless networks such as WLAN and WiMAX. This definite reference covers the critical applications today’s professionals need to understand, from antennas for IoT and antenna design for 5G mm-wave devices, to body-centric communication systems and antennas for unmanned aerial vehicles.
Download or read book Advanced RFID Systems Security and Applications written by Karmakar, Nemai Chandra and published by IGI Global. This book was released on 2012-09-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: As modern technologies continue to transform and impact our society, Radio Frequency Identification has emerged as one of the top areas of study to do just that. Using its wireless data capturing technique and incredible capabilities such as automatic identification, tracking, handling large amounts of data, and flexibility in operation, RFID aims to revamp the new millennium. Advanced RFID Systems, Security, and Applications features a comprehensive collection of research provided by leading experts in both academia and industries. This leading reference source provides state-of-the- art development on RFID and its contents will be of the upmost use to students and researchers at all levels as well as technologists, planners, and policy makers. RFID technology is progressing into a new phase of development.
Download or read book RFID written by V. Daniel Hunt and published by John Wiley & Sons. This book was released on 2007-04-13 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to RFID technology. It describes and addresses the following: How RFID works, how it is and can be used in current and future applications. The History of RFID technology, the current state of practice and where RFID is expected to be taken in the future. The role of middleware software to route data between the RFID network and the information technology systems within an organization. Commercial and government use of RFID technology with an emphasis on a wide range of applications including retail and consumer packaging, transportation and distribution of products, industrial and manufacturing operations, security and access control. Industry standards and the regulatory compliance environment and finally, the privacy issues faced by the public and industry regarding the deployment of RFID technology.
Download or read book Multi dimensional Ultra high Frequency Passive Radio Frequency Identification Tag Antenna Designs written by Stefanie Alkistis Delichatsios and published by . This book was released on 2006 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, we present the design, simulation, and empirical evaluation of two novel multi-dimensional ultra-high frequency (UHF) passive radio frequency identification (RFID) tag antennas, the Albano-Dipole antenna and the Albano-Patch antenna, that provide omnidirectional communication capabilities. The performance of a passive UHF RFID tag is highly dependent upon the tag's antenna design, the tag's placement on an item, the materials in the item, and the item's surrounding environment. The majority of existing commercial tag antennas are two-dimensional making the tags a) orientation-sensitive, working well in some directions and not at all in others, and b) susceptible to communication interference from the contents of the tagged object. The Albano antenna designs are three-dimensional, affording the tags to be minimally affected by object material while maintaining near omnidirectional performance. The Albano antenna designs provide significantly improved orientation insensitivity compared with existing widely deployed commercial tag antenna designs.
Download or read book Radio Frequency Identification Fundamentals and Applications written by Cristina Turcu and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, entitled Radio Frequency Identification Fundamentals and Applications, Bringing Research to Practice, bridges the gap between theory and practice and brings together a variety of research results and practical solutions in the field of RFID. The book is a rich collection of articles written by people from all over the world: teachers, researchers, engineers, and technical people with strong background in the RFID area. Developed as a source of information on RFID technology, the book addresses a wide audience including designers for RFID systems, researchers, students and anyone who would like to learn about this field. At this point I would like to express my thanks to all scientists who were kind enough to contribute to the success of this project by presenting numerous technical studies and research results. However, we couldn’t have published this book without the effort of InTech team. I wish to extend my most sincere gratitude to InTech publishing house for continuing to publish new, interesting and valuable books for all of us.
