Download or read book Radio Frequency Identification and Sensors written by Etienne Perret and published by John Wiley & Sons. This book was released on 2014-12-15 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, conversely, making them sensitive in order to produce sensors, meanwhile keeping their unique ID. The RFID advantages are discussed, along with its numerous features, and comparisons with the barcode technology are presented. After that, the new chipless RFID technology is introduced on the basis of the previous conclusions. Original technological approaches are introduced and discussed in order to demonstrate the practical and economic potential of the chipless technology.
Download or read book Radio Frequency Identification and Sensors written by Etienne Perret and published by John Wiley & Sons. This book was released on 2014-12-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, conversely, making them sensitive in order to produce sensors, meanwhile keeping their unique ID. The RFID advantages are discussed, along with its numerous features, and comparisons with the barcode technology are presented. After that, the new chipless RFID technology is introduced on the basis of the previous conclusions. Original technological approaches are introduced and discussed in order to demonstrate the practical and economic potential of the chipless technology.
Download or read book RFID Explained written by Roy Want and published by Springer Nature. This book was released on 2022-06-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lecture provides an introduction to Radio Frequency Identification (RFID), a technology enabling automatic identification of objects at a distance without requiring line-of-sight. Electronic tagging can be divided into technologies that have a power source (active tags), and those that are powered by the tag interrogation signal (passive tags); the focus here is on passive tags. An overview of the principles of the technology divides passive tags into devices that use either near field or far field coupling to communicate with a tag reader. The strengths and weaknesses of the approaches are considered, along with the standards that have been put in place by ISO and EPCGlobal to promote interoperability and the ubiquitous adoption of the technology. A section of the lecture has been dedicated to the principles of reading co-located tags, as this represents a significant challenge for a technology that may one day be able to automatically identify all of the items in your shopping cart in a just few seconds. In fact, RFID applications are already quite extensive and this lecture classifies the primary uses. Some variants of modern RFID can also be integrated with sensors enabling the technology to be extended to measure parameters in the local environment, such as temperature & pressure. The uses and applications of RFID sensors are further described and classified. Later we examine important lessons surrounding the deployment of RFID for the Wal-Mart and the Metro AG store experiences, along with deployments in some more exploratory settings. Extensions of RFID that make use of read/write memory integrated with the tag are also discussed, in particular looking at novel near term opportunities. Privacy and social implications surrounding the use of RFID inspire recurring debates whenever there is discussion of large scale deployment; we examine the pros and cons of the issues and approaches for mitigating the problems. Finally, the remaining challenges of RFID are considered and we look to the future possibilities for the technology. Table of Contents: Introduction / Principles of Radio Frequency Identification / RFID Industry Standards / Reading Collected RFID Tags / Applications of RFID Tagging / RFID Incorporating Sensing / Deployment and Experience with RFID Systems / Privacy, Kill Switches, and Blocker Tags / Opportunities for RFID Integrated with Memory / Challenges, Future Technology, and Conclusion
Download or read book Chipless and Conventional Radio Frequency Identification Systems for Ubiquitous Tagging written by Chandra Karmakar, Nemai and published by IGI Global. This book was released on 2012-05-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) is a wireless tracking and data capturing technique for automatic identification, tracking, security surveillance, logistics, and supply chain management. RFID tags, which have been successfully employed in many industries including retail and healthcare, have provided a multitude of benefits but also currently remain very costly. Chipless and Conventional Radio Frequency Identification: Systems for Ubiquitous Tagging explores the use of conventional RFID technology as well as chipless RFID technology, which provides a cheaper method of implementation, opening many doors for a variety of applications and industries. This practical reference, designed for researchers and practitioners, investigates the growing field of RFID and its promising future.
Download or read book RFID Enabled Sensor Design and Applications written by Amin Rida and published by Artech House. This book was released on 2010 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: RFID (radio-frequency identification) is an emerging communication system technology and one of the most rapidly growing segments of todayOCOs automatic identification data collection industry. This cutting-edge resource offers you a solid understanding of the basic technical principles and applications of RFID-enabled sensor systems. The book provides you with a detailed description of RFID and itOCOs operation, along with a fundamental overview of sensors and wireless sensor networks. Moreover, this practical reference gives you step-by-step guidance on how to design RFID-enabled sensors that form a wireless sensor network. You also find detailed coverage of state-of OCothe-art RFID/sensor technology and worldwide applications.
Download or read book Chipless RFID Sensors written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.
Download or read book Security in RFID and Sensor Networks written by Paris Kitsos and published by CRC Press. This book was released on 2016-04-19 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past several years, there has been an increasing trend in the use of Radio Frequency Identification (RFID) and Wireless Sensor Networks (WSNs) as well as in the integration of both systems due to their complementary nature, flexible combination, and the demand for ubiquitous computing. As always, adequate security remains one of the open are
Download or read book Chipless RFID Sensors written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2016-03-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.
Download or read book RFID and Sensor Networks written by Yan Zhang and published by CRC Press. This book was released on 2009-11-04 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The escalating demand for ubiquitous computing along with the complementary and flexible natures of Radio Frequency Identification (RFID) and Wireless Sensor Networks (WSNs) have sparked an increase in the integration of these two dynamic technologies. Although a variety of applications can be observed under development and in practical use, there
Download or read book Design and Development of Radio Frequency Identification RFID and RFID enabled Sensors on Flexible Low Cost Substrates written by Li Yang and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step discussion of the design and development of radio frequency identification (RFID) and RFID-enabled sensors on flexible low cost substrates for UHF frequency bands. Various examples of fully function building blocks (design and fabrication of antennas, integration with ICs and microcontrollers, power sources, as well as inkjet-printing techniques) demonstrate the revolutionary effect of this approach in low cost RFID and RFID-enabled sensors fields. This approach could be easily extended to other microwave and wireless applications as well. The first chapter describes the basic functionality and the physical and IT-related principles underlying RFID and sensors technology. Chapter two explains in detail inkjet-printing technology providing the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic substrates such as Liquid Crystal Polymer (LCP) or paper-based substrates. Chapter three demonstrates several compact inkjet-printed UHF RFID antennas using antenna matching techniques to match IC's complex impedance as prototypes to provide the proof of concept of this technology. Chapter four discusses the benefits of using conformal magnetic material as a substrate for miniaturized high-frequency circuit applications. In addition, in Chapter five, the authors also touch up the state-of-the-art area of fully-integrated wireless sensor modules on organic substrates and show the first ever 2D sensor integration with an RFID tag module on paper, as well as the possibility of 3D multilayer paper-based RF/microwave structures. Table of Contents: Radio Frequency Identification Introduction / Flexible Organic Low Cost Substrates / Benchmarking RFID Prototypes on Organic Substrates / Conformal Magnetic Composite RFID Tags / Inkjet-Printed RFID-Enabled Sensors
Download or read book Radio Frequency Identification written by Paulo Crepaldi and published by BoD – Books on Demand. This book was released on 2017-11-29 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-frequency identification (RFID) is one of the modern names that is becoming increasingly popular, as a result of many years of researches and investigations. Powerful hardware and software tools have contributed, and still do, to place the radio-frequency identification as a popular and widely used technology, from large corporations to individuals, and custom applications. Although RFID offers many advantages over other technologies, it is essential to be aware of its limitations. Therefore, it will be possible to overcome the limitations and to increase its applications. As an example, cost, safety, security, transmissions formats, and international standards are important merit figures of continuous improvement. In this book, we present important proposals that will certainly contribute to the evolution of RFID. Theoretical and practical aspects are presented and discussed by the authors, and thus we invite everyone for a pleasant reading.
Download or read book Wireless Power Transmission for Sustainable Electronics written by Nuno Borges Carvalho and published by John Wiley & Sons. This book was released on 2020-02-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a collection of works produced by COST Action IC1301 with the goal of achieving significant advances in the field of wireless power transmission This book constitutes together information from COST Action IC1301, a group of academic and industry experts seeking to align research efforts in the field of wireless power transmission (WPT). It begins with a discussion of backscatter as a solution for Internet of Things (IoT) devices and goes on to describe ambient backscattering sensors that use FM broadcasting for low cost and low power wireless applications. The book also explores localization of passive RFID tags and augmented tags using nonlinearities of RFID chips. It concludes with a review of methods of electromagnetic characterization of textile materials for the development of wearable antennas. Wireless Power Transmission for Sustainable Electronics: COST WiPE - IC1301 covers textile-supported wireless energy transfer, and reviews methods for the electromagnetic characterization of textile materials for the development of wearable antennas. It also looks at: backscatter RFID sensor systems for remote health monitoring; simultaneous localization (of robots and objects) and mapping (SLAM); autonomous system of wireless power distribution for static and moving nodes of wireless sensor networks; and more. Presents techniques for smart beam-forming for "on demand" wireless power transmission (WPT) Discusses RF and microwave energy harvesting for space applications Describes miniaturized RFID transponders for object identification and sensing Wireless Power Transmission for Sustainable Electronics: COST WiPE - IC1301 is an excellent book for both graduate students and industry engineers involved in wireless communications and power transfer, and sustainable materials for those fields.
Download or read book Radio Frequency Identification and Sensors written by Etienne Perret and published by John Wiley & Sons. This book was released on 2014-12-04 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the field of identification and sensors, more precisely the possibility of collecting information remotely with RF waves (RFID). The book introduces the technology of chipless RFID starting from classical RFID and barcode, and explores the field of identification and sensors without wire, without batteries, without chip, and with tags that can even be printed on paper. A technique for automatic design of UHF RFID tags is presented , aiming at making the tags as insensitive as possible to the environment (with the ability to increase the reading range reliability), or, conversely, making them sensitive in order to produce sensors, meanwhile keeping their unique ID. The RFID advantages are discussed, along with its numerous features, and comparisons with the barcode technology are presented. After that, the new chipless RFID technology is introduced on the basis of the previous conclusions. Original technological approaches are introduced and discussed in order to demonstrate the practical and economic potential of the chipless technology.
Download or read book Radio Frequency Identification Technologies written by National Research Council and published by National Academies Press. This book was released on 2004-12-29 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Identification (RFID) technology is gaining rapid acceptance as a means to track a wide array of manufactured objects. Currently, RFID technologies have shown promise in transportation (e.g., smart fare cards) and commerce (e.g., inventory control) for a variety of uses and are likely to find many new applications in both military and civilian areas if and when current technical issues are resolved. There are a number of policy concerns (e.g., privacy), however, that will become more crucial as the technology spreads. This report presents a summary of a workshop, held by the NRC at the request of the Defense Advanced Research Projects Agency, to explore many of the key technical and policy issues. Several important themes that are likely to govern expansion of RFID technology emerged from the workshop and are discussed.
Download or read book Wirelessly Powered Sensor Networks and Computational RFID written by Joshua R. Smith and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wireless Identification and Sensing Platform (WISP) is the first of a new class of RF-powered sensing and computing systems. Rather than being powered by batteries, these sensor systems are powered by radio waves that are either deliberately broadcast or ambient. Enabled by ongoing exponential improvements in the energy efficiency of microelectronics, RF-powered sensing and computing is rapidly moving along a trajectory from impossible (in the recent past), to feasible (today), toward practical and commonplace (in the near future). This book is a collection of key papers on RF-powered sensing and computing systems including the WISP. Several of the papers grew out of the WISP Challenge, a program in which Intel Corporation donated WISPs to academic applicants who proposed compelling WISP-based projects. The book also includes papers presented at the first WISP Summit, a workshop held in Berkeley, CA in association with the ACM Sensys conference, as well as other relevant papers. The book provides a window into the fascinating new world of wirelessly powered sensing and computing.
Download or read book RFID in Libraries written by Lori Bowen Ayre and published by American Library Association. This book was released on 2012 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Expert guides to library systems and services."
Download or read book Chipless Radio Frequency Identification Reader Signal Processing written by Nemai Chandra Karmakar and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a comprehensive overview and analysis of the recent developments in signal processing for Chipless Radio Frequency Identification Systems This book presents the recent research results on Radio Frequency Identification (RFID) and provides smart signal processing methods for detection, signal integrity, multiple-access and localization, tracking, and collision avoidance in Chipless RFID systems. The book is divided into two sections: The first section discusses techniques for detection and denoising in Chipless RFID systems. These techniques include signal space representation, detection of frequency signatures using UWB impulse radio interrogation, time domain analysis, singularity expansion method for data extraction, and noise reduction and filtering techniques. The second section covers collision and error correction protocols, multi-tag identification through time-frequency analysis, FMCW radar based collision detection and multi-access for Chipless RFID tags as we as localization and tag tracking. Describes the use of UWB impulse radio interrogation to remotely estimate the frequency signature of Chipless RFID tags using the backscatter principle Reviews the collision problem in both chipped and Chipless RFID systems and summarizes the prevailing anti-collision algorithms to address the problem Proposes state-of-the-art multi-access and signal integrity protocols to improve the efficacy of the system in multiple tag reading scenarios Features an industry approach to the integration of various systems of the Chipless RFID reader-integration of physical layers, middleware, and enterprise software Chipless Radio Frequency Identification Reader Signal Processing is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.
