Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Computational Fluid Dynamics in Industrial Combustion written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2000-10-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many books have been written on computational fluid dynamics (CFD) and many written on combustion, most contain very limited coverage of the combination of CFD and industrial combustion. Furthermore, most of these books are written at an advanced academic level, emphasize theory over practice, and provide little help to engineers who need to use CFD for combustion modeling. Computational Fluid Dynamics in Industrial Combustion fills this gap in the literature. Focusing on topics of interest to the practicing engineer, it codifies the many relevant books, papers, and reports written on this combined subject into a single, coherent reference. It looks at each topic from a somewhat narrow perspective to see how that topic affects modeling in industrial combustion. The editor and his team of expert authors address these topics within three main sections: Modeling Techniques-The basics of CFD modeling in combustion Industrial Applications-Specific applications of CFD in the steel, aluminum, glass, gas turbine, and petrochemical industries Advanced Techniques-Subjects rarely addressed in other texts, including design optimization, simulation, and visualization Rapid increases in computing power and significant advances in commercial CFD codes have led to a tremendous increase in the application of CFD to industrial combustion. Thorough and clearly representing the techniques and issues confronted in industry, Computational Fluid Dynamics in Industrial Combustion will help bring you quickly up to date on current methods and gain the ability to set up and solve the various types of problems you will encounter.
Download or read book Radiative Heat Transfer in Turbulent Combustion Systems written by Michael F. Modest and published by Springer. This book was released on 2016-01-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction reviews why combustion and radiation are important, as well as the technical challenges posed by radiation. Emphasis is on interactions among turbulence, chemistry and radiation (turbulence-chemistry-radiation interactions – TCRI) in Reynolds-averaged and large-eddy simulations. Subsequent chapters cover: chemically reacting turbulent flows; radiation properties, Reynolds transport equation (RTE) solution methods, and TCRI; radiation effects in laminar flames; TCRI in turbulent flames; and high-pressure combustion systems. This Brief presents integrated approach that includes radiation at the outset, rather than as an afterthought. It stands as the most recent developments in physical modeling, numerical algorithms, and applications collected in one monograph.
Download or read book Thermal Radiative Transfer and Properties written by M. Quinn Brewster and published by John Wiley & Sons. This book was released on 1992-04-16 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only enables readers to include radiation as part of their design and analysis but also appreciate the radiative transfer processes in both nature and engineering systems. Offers two distinguishing features--a whole chapter devoted to the classical dispersion theory which lays a foundation for the discussion of radiative properties presented throughout and a detailed description of particle radiative properties, including real particle size distribution effects. Presents numerous realistic and instructive illustrations and problems involving current topics such as planetary heat transfer, satellite thermal control, atmospheric radiation, radiation in industrial and propulsion combustion systems and more.
Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2013-02-20 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Radiative Heat Transfer describes the basic physics of radiation heat transfer. The book provides models, methodologies, and calculations essential in solving research problems in a variety of industries, including solar and nuclear energy, nanotechnology, biomedical, and environmental. Every chapter of Radiative Heat Transfer offers uncluttered nomenclature, numerous worked examples, and a large number of problems—many based on real world situations—making it ideal for classroom use as well as for self-study. The book's 24 chapters cover the four major areas in the field: surface properties; surface transport; properties of participating media; and transfer through participating media. Within each chapter, all analytical methods are developed in substantial detail, and a number of examples show how the developed relations may be applied to practical problems. - Extensive solution manual for adopting instructors - Most complete text in the field of radiative heat transfer - Many worked examples and end-of-chapter problems - Large number of computer codes (in Fortran and C++), ranging from basic problem solving aids to sophisticated research tools - Covers experimental methods
Download or read book Thermal Radiation Heat Transfer Fourth Edition written by Robert Siegel and published by CRC Press. This book was released on 2001-12-07 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised 4th edition provides an up-to-date, comprehensive single source of information on the important subjects in engineering radiative heat transfer. It presents the subject in a progressive manner that is excellent for classroom use or self-study, and also provides an annotated reference to literature and research in the field. The foundations and methods for treating radiative heat transfer are developed in detail, and the methods are demonstrated and clarified by solving example problems. The examples are especially helpful for self-study. The treatment of spectral band properties of gases has been made current and the methods are described in detail and illustrated with examples. The combination of radiation with conduction and/or convection has been given more emphasis nad has been merged with results for radiation alone that serve as a limiting case; this increases practicality for energy transfer in translucent solids and fluids. A comprehensive catalog of configuration factors on the CD that is included with each book provides over 290 factors in algebraic or graphical form. Homework problems with answers are given in each chapter, and a detailed and carefully worked solution manual is available for instructors.
Download or read book Enclosure Fire Dynamics written by Bjorn Karlsson and published by CRC Press. This book was released on 1999-09-28 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing complexity of technological solutions to both fire safety design issues and fire safety regulations demand higher levels of training and continuing education for fire protection engineers. Historical precedents on how to deal with fire hazards in new or unusual buildings are seldom available, and new performance-based building codes
Download or read book Computational Fluid Dynamics in Fire Engineering written by Guan Heng Yeoh and published by Butterworth-Heinemann. This book was released on 2009-04-20 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire and combustion presents a significant engineering challenge to mechanical, civil and dedicated fire engineers, as well as specialists in the process and chemical, safety, buildings and structural fields. We are reminded of the tragic outcomes of 'untenable' fire disasters such as at King's Cross underground station or Switzerland's St Gotthard tunnel. In these and many other cases, computational fluid dynamics (CFD) is at the forefront of active research into unravelling the probable causes of fires and helping to design structures and systems to ensure that they are less likely in the future. Computational fluid dynamics (CFD) is routinely used as an analysis tool in fire and combustion engineering as it possesses the ability to handle the complex geometries and characteristics of combustion and fire. This book shows engineering students and professionals how to understand and use this powerful tool in the study of combustion processes, and in the engineering of safer or more fire resistant (or conversely, more fire-efficient) structures.No other book is dedicated to computer-based fire dynamics tools and systems. It is supported by a rigorous pedagogy, including worked examples to illustrate the capabilities of different models, an introduction to the essential aspects of fire physics, examination and self-test exercises, fully worked solutions and a suite of accompanying software for use in industry standard modeling systems. - Computational Fluid Dynamics (CFD) is widely used in engineering analysis; this is the only book dedicated to CFD modeling analysis in fire and combustion engineering - Strong pedagogic features mean this book can be used as a text for graduate level mechanical, civil, structural and fire engineering courses, while its coverage of the latest techniques and industry standard software make it an important reference for researchers and professional engineers in the mechanical and structural sectors, and by fire engineers, safety consultants and regulators - Strong author team (CUHK is a recognized centre of excellence in fire eng) deliver an expert package for students and professionals, showing both theory and applications. Accompanied by CFD modeling code and ready to use simulations to run in industry-standard ANSYS-CFX and Fluent software
Download or read book Radiative Heat Transfer written by Michael F. Modest and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive treatment of heat transfer. In addition to the standard topics usually covered, it also includes a number of modern state-of-the-art topics including: radiative properties of particles, generation of P-N approximation and collimated irradiation.
Download or read book Coal Fired Power Generation Handbook written by James G. Speight and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal accounts for approximately one quarter of world energy consumption and of the coal produced worldwide approximately 65% is shipped to electricity producers and 33% to industrial consumers, with most of the remainder going to consumers in the residential and commercial sectors. The total share of total world energy consumption by coal is expected to increase to almost 30% in 2035. This book describes the challenges and steps by which electricity is produced form coal and deals with the challenges for removing the environmental objections to the use of coal in future power plants. New technologies are described that could virtually eliminate the sulfur, nitrogen, and mercury pollutants that are released when coal is burned for electricity generation. In addition, technologies for the capture greenhouse gases emitted from coal-fired power plants are described and the means of preventing such emissions from contributing to global warming concerns. Written by one of the world’s leading energy experts, this volume is a must-have for any engineer, scientist, or student working in this field, providing a valuable reference and guide in a quickly changing field.
Download or read book Transport Phenomena in Fires written by Mohammad Faghri and published by WIT Press. This book was released on 2008 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled fires are beneficial for the generation of heat and power while uncontrolled fires, like fire incidents and wildfires, are detrimental and can cause enormous material damage and human suffering. This edited book presents the state-of-the-art of modeling and numerical simulation of the important transport phenomena in fires. It describes how computational procedures can be used in analysis and design of fire protection and fire safety. Computational fluid dynamics, turbulence modeling, combustion, soot formation, thermal radiation modeling are demonstrated and applied to pool fires, flame spread, wildfires, fires in buildings and other examples.
Download or read book Internal Combustion Processes of Liquid Rocket Engines written by Zhen-Guo Wang and published by John Wiley & Sons. This book was released on 2016-05-17 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on modeling and numerical simulations of combustion in liquid rocket engines, covering liquid propellant atomization, evaporation of liquid droplets, turbulent flows, turbulent combustion, heat transfer, and combustion instability. It presents some state of the art models and numerical methodologies in this area. The book can be categorized into two parts. Part 1 describes the modeling for each subtopic of the combustion process in the liquid rocket engines. Part 2 presents detailed numerical methodology and several representative applications in simulations of rocket engine combustion.
Download or read book VDI Heat Atlas written by VDI Gesellschaft and published by Springer Science & Business Media. This book was released on 2010-07-21 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.
Download or read book Heat and Mass Transfer written by Anthony Mills and published by Routledge. This book was released on 2018-05-04 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete reference book covers topics in heat and mass transfer, containing extensive information in the form of interesting and realistic examples, problems, charts, tables, illustrations, and more. Heat and Mass Transfer emphasizes practical processes and provides the resources necessary for performing accurate and efficient calculations.This excellent reference comes with a complete set of fully integrated software available for download at crcpress.com, consisting of 21 computer programs that facilitate calculations, using procedures developed in the text. Easy-to-follow instructions for software implementation make this a valuable tool for effective problem-solving.
Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Radiation Heat Transfer 5th Edition written by John R. Howell and published by CRC Press. This book was released on 2010-09-28 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive overview of the radiative behavior and properties of materials, the fifth edition of this classic textbook describes the physics of radiative heat transfer, development of relevant analysis methods, and associated mathematical and numerical techniques. Retaining the salient features and fundamental coverage that have made it popular, Thermal Radiation Heat Transfer, Fifth Edition has been carefully streamlined to omit superfluous material, yet enhanced to update information with extensive references. Includes four new chapters on Inverse Methods, Electromagnetic Theory, Scattering and Absorption by Particles, and Near-Field Radiative Transfer Keeping pace with significant developments, this book begins by addressing the radiative properties of blackbody and opaque materials, and how they are predicted using electromagnetic theory and obtained through measurements. It discusses radiative exchange in enclosures without any radiating medium between the surfaces—and where heat conduction is included within the boundaries. The book also covers the radiative properties of gases and addresses energy exchange when gases and other materials interact with radiative energy, as occurs in furnaces. To make this challenging subject matter easily understandable for students, the authors have revised and reorganized this textbook to produce a streamlined, practical learning tool that: Applies the common nomenclature adopted by the major heat transfer journals Consolidates past material, reincorporating much of the previous text into appendices Provides an updated, expanded, and alphabetized collection of references, assembling them in one appendix Offers a helpful list of symbols With worked-out examples, chapter-end homework problems, and other useful learning features, such as concluding remarks and historical notes, this new edition continues its tradition of serving both as a comprehensive textbook for those studying and applying radiative transfer, and as a repository of vital literary references for the serious researcher.
