Download or read book Radiation Single Event Effects SEE Impact on Complex Avionics Architecture Reliability written by Robert F. Hodson and published by . This book was released on 2019 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Effects on Integrated Circuits and Systems for Space Applications written by Raoul Velazco and published by Springer. This book was released on 2019-04-10 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with invaluable overviews and updates of the most important topics in the radiation-effects field, enabling them to face significant challenges in the quest for the insertion of ever-higher density and higher performance electronic components in satellite systems. Readers will benefit from the up-to-date coverage of the various primary (classical) sub-areas of radiation effects, including the space and terrestrial radiation environments, basic mechanisms of total ionizing dose, digital and analog single-event transients, basic mechanisms of single-event effects, system-level SEE analysis, device-level, circuit-level and system-level hardening approaches, and radiation hardness assurance. Additionally, this book includes in-depth discussions of several newer areas of investigation, and current challenges to the radiation effects community, such as radiation hardening by design, the use of Commercial-Off-The-Shelf (COTS) components in space missions, CubeSats and SmallSats, the use of recent generation FPGA’s in space, and new approaches for radiation testing and validation. The authors provide essential background and fundamentals, in addition to information on the most recent advances and challenges in the sub-areas of radiation effects. Provides a concise introduction to the fundamentals of radiation effects, latest research results, and new test methods and procedures; Discusses the radiation effects and mitigation solutions for advanced integrated circuits and systems designed to operate in harsh radiation environments; Includes coverage of the impact of Small Satellites in the space industry.
Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by MDPI. This book was released on 2019-08-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.
Download or read book Radiation Effects in Semiconductors written by Krzysztof Iniewski and published by CRC Press. This book was released on 2018-09-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space applications, nuclear physics, military operations, medical imaging, and especially electronics (modern silicon processing) are obvious fields in which radiation damage can have serious consequences, i.e., degradation of MOS devices and circuits. Zeroing in on vital aspects of this broad and complex topic, Radiation Effects in Semiconductors addresses the ever-growing need for a clear understanding of radiation effects on semiconductor devices and circuits to combat potential damage it can cause. Features a chapter authored by renowned radiation authority Lawrence T. Clark on Radiation Hardened by Design SRAM Strategies for TID and SEE Mitigation This book analyzes the radiation problem, focusing on the most important aspects required for comprehending the degrading effects observed in semiconductor devices, circuits, and systems when they are irradiated. It explores how radiation interacts with solid materials, providing a detailed analysis of three ways this occurs: Photoelectric effect, Compton effect, and creation of electron-positron pairs. The author explains that the probability of these three effects occurring depends on the energy of the incident photon and the atomic number of the target. The book also discusses the effects that photons can have on matter—in terms of ionization effects and nuclear displacement Written for post-graduate researchers, semiconductor engineers, and nuclear and space engineers with some electronics background, this carefully constructed reference explains how ionizing radiation is creating damage in semiconducting devices and circuits and systems—and how that damage can be avoided in areas such as military/space missions, nuclear applications, plasma damage, and X-ray-based techniques. It features top-notch international experts in industry and academia who address emerging detector technologies, circuit design techniques, new materials, and innovative system approaches.
Download or read book Single Event Phenomena written by G.C. Messenger and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is written for neophytes, students, and practitioners to aid in their understanding of single event phenomena. It attempts to collect the highlights as well as many of the more detailed aspects of this field into an entity that portrays the theoretical as well as the practical applications of this subject. Those who claim that "theory" is not for them can skip over the earlier chapters dealing with the fundamental and theoretical portions and find what they need in the way of hands-on guidelines and pertinent formulas in the later chapters. Perhaps, after a time they will return to peruse the earlier chapters for a more complete rendition and appreciation of the subject matter. It is felt that the reader should have some acquaintance with the electronics of semiconductors and devices, some broad atomic physics introduction, as well as a respectable level of mathematics through calculus, including simple differential equations. A large part of the preceding can be obtained informally, through job experience, self-study, evening classes, as well as from a formal college curriculum.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Growth written by Panel on Reliability Growth Methods for Defense Systems and published by National Academy Press. This book was released on 2015-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.
Download or read book Human Health and Performance Risks of Space Exploration Missions written by Jancy C. McPhee and published by U. S. National Aeronautics & Space Administration. This book was released on 2009 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Climate Impacts on Energy Systems written by Jane O. Ebinger and published by World Bank Publications. This book was released on 2011 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: "While the energy sector is a primary target of efforts to arrest and reverse the growth of greenhouse gas emissions and lower the carbon footprint of development, it is also expected to be increasingly affected by unavoidable climate consequences from the damage already induced in the biosphere. Energy services and resources, as well as seasonal demand, will be increasingly affected by changing trends, increasing variability, greater extremes and large inter-annual variations in climate parameters in some regions. All evidence suggests that adaptation is not an optional add-on but an essential reckoning on par with other business risks. Existing energy infrastructure, new infrastructure and future planning need to consider emerging climate conditions and impacts on design, construction, operation, and maintenance. Integrated risk-based planning processes will be critical to address the climate change impacts and harmonize actions within and across sectors. Also, awareness, knowledge, and capacity impede mainstreaming of climate adaptation into the energy sector. However, the formal knowledge base is still nascent?information needs are complex and to a certain extent regionally and sector specific. This report provides an up-to-date compendium of what is known about weather variability and projected climate trends and their impacts on energy service provision and demand. It discusses emerging practices and tools for managing these impacts and integrating climate considerations into planning processes and operational practices in an environment of uncertainty. It focuses on energy sector adaptation, rather than mitigation which is not discussed in this report. This report draws largely on available scientific and peer-reviewed literature in the public domain and takes the perspective of the developing world to the extent possible."
Download or read book The Sun to the Earth and Beyond written by National Research Council and published by National Academies Press. This book was released on 2003-12-17 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, The Sun to the Earth-and Beyond: Panel Reports, is a compilation of the reports from five National Research Council (NRC) panels convened as part of a survey in solar and space physics for the period 2003-2013. The NRC's Space Studies Board and its Committee on Solar and Space Physics organized the study. Overall direction for the survey was provided by the Solar and Space Physics Survey Committee, whose report, The Sun to the Earth-and Beyond: A Decadal Research Strategy in Solar and Space Physics, was delivered to the study sponsors in prepublication format in August 2002. The final version of that report was published in June 2003. The panel reports provide both a detailed rationale for the survey committee's recommendations and an expansive view of the numerous opportunities that exist for a robust program of exploration in solar and space physics.
Download or read book High Performance Silicon Imaging written by Daniel Durini and published by Woodhead Publishing. This book was released on 2019-10-19 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Silicon Imaging: Fundamentals and Applications of CMOS and CCD Sensors, Second Edition, covers the fundamentals of silicon image sensors, addressing existing performance issues and current and emerging solutions. Silicon imaging is a fast growing area of the semiconductor industry. Its use in cell phone cameras is already well established, with emerging applications including web, security, automotive and digital cinema cameras. The book has been revised to reflect the latest state-of-the art developments in the field, including 3D imaging, advances in achieving lower signal noise, and new applications for consumer markets. The fundamentals section has also been expanded to include a chapter on the characterization and testing of CMOS and CCD sensors that is crucial to the success of new applications. This book is an excellent resource for both academics and engineers working in the optics, photonics, semiconductor and electronics industries. - Covers the fundamentals of silicon-based image sensors and technical advances, focusing on performance issues - Looks at image sensors in applications, such as mobile phones, scientific imaging, and TV broadcasting, and in automotive, consumer and biomedical applications - Addresses the theory behind 3D imaging and 3D sensor development, including challenges and opportunities
Download or read book Commercial Aviation Safety Sixth Edition written by Stephen K. Cusick and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-To-Date Coverage of Every Aspect of Commercial Aviation Safety Completely revised edition to fully align with current U.S. and international regulations, this hands-on resource clearly explains the principles and practices of commercial aviation safety—from accident investigations to Safety Management Systems. Commercial Aviation Safety, Sixth Edition, delivers authoritative information on today's risk management on the ground and in the air. The book offers the latest procedures, flight technologies, and accident statistics. You will learn about new and evolving challenges, such as lasers, drones (unmanned aerial vehicles), cyberattacks, aircraft icing, and software bugs. Chapter outlines, review questions, and real-world incident examples are featured throughout. Coverage includes: • ICAO, FAA, EPA, TSA, and OSHA regulations • NTSB and ICAO accident investigation processes • Recording and reporting of safety data • U.S. and international aviation accident statistics • Accident causation models • The Human Factors Analysis and Classification System (HFACS) • Crew Resource Management (CRM) and Threat and Error Management (TEM) • Aviation Safety Reporting System (ASRS) and Flight Data Monitoring (FDM) • Aircraft and air traffic control technologies and safety systems • Airport safety, including runway incursions • Aviation security, including the threats of intentional harm and terrorism • International and U.S. Aviation Safety Management Systems
Download or read book The GOES R Series written by Steven J. Goodman and published by Elsevier. This book was released on 2019-10-05 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The GOES-R Series: A New Generation of Geostationary Environmental Satellites introduces the reader to the most significant advance in weather technology in a generation. The world’s new constellation of geostationary operational environmental satellites (GOES) are in the midst of a drastic revolution with their greatly improved capabilities that provide orders of magnitude improvements in spatial, temporal and spectral resolution. Never before have routine observations been possible over such a wide area. Imagine satellite images over the full disk every 10 or 15 minutes and monitoring of severe storms, cyclones, fires and volcanic eruptions on the scale of minutes. Introduces the GOES-R Series, with chapters on each of its new products Provides an overview of how to read new satellite images Includes full-color images and online animations that demonstrate the power of this new technology
Download or read book Managing the Risks of Extreme Events and Disasters to Advance Climate Change Adaptation written by Intergovernmental Panel on Climate Change and published by Cambridge University Press. This book was released on 2012-05-28 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extreme weather and climate events, interacting with exposed and vulnerable human and natural systems, can lead to disasters. This Special Report explores the social as well as physical dimensions of weather- and climate-related disasters, considering opportunities for managing risks at local to international scales. SREX was approved and accepted by the Intergovernmental Panel on Climate Change (IPCC) on 18 November 2011 in Kampala, Uganda.
Download or read book Handbook of Small Satellites written by Joseph N. Pelton and published by Springer. This book was released on 2020-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.
Download or read book Model Based Systems Engineering written by A. Wayne Wymore and published by CRC Press. This book was released on 2018-05-04 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-Based Systems Engineering explains the fundamental theories behind model-based systems and the considerations involved in applying theory to the design of real systems. The book begins by presenting terms used in systems engineering and introducing the discrete system and its components. The remainder of the text explains topics such as the mathematical theory of system coupling, the homomorphic relationship between systems, the concept of system mode, the mathematical structure of T3SD system requirements, and the implications of that structure for T3SD system design. Appendices include a short bibliography, detailed definitions of all examples discussed in the text, a list of all notations used, and an index. Model-Based Systems Engineering is an excellent text for engineering students, and an invaluable reference for engineers and scientists.
