Download or read book Radiation Curing in Polymer Science and Technology written by Jean-Pierre Fouassier and published by Springer Science & Business Media. This book was released on 1993-07-31 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume three deals specifically with the role of monomers and resins in radiation curing. The nature of the backbone of ologomers leads to the ultimate physical or chemical properties of the UV-cured material. This chapter also covers aspects of the chemistry of these compounds in relation to their end uses.
Download or read book Radiation Curing in Polymer Science and Technology Photoinitiating systems written by Jean-Pierre Fouassier and published by Elsevier Science & Technology. This book was released on 1993 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this four-volume, multi-author reference work is to provide a comprehensive guide to the radiation curing field. Volume Two is devoted to the chemistry of photoinitiators, presenting and discussing basic concepts and the reactivity of typical systems.
Download or read book Radiation Curing in Polymer Science and Technology Volume II written by J. P. Fouassier and published by Springer. This book was released on 1993-07-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for photoinitiators has been steadily increasing since benzoin ethers, latent radical sources activated by UV light, were first industrially employed in particle-board finishing in the 1960s. Among the factors con tributing to the continuing success of photoinitiators are the widespread adoption of dry coatings which eliminate the environmental problems as sociated with solution polymerisation and the development of new printing and resist applications. All of the early commercial photoinitiators were organic compounds, primarily derivatives of benzil or acetophenone. But as research in organo metallic chemistry gained momentum, the potential advantages of organo metallic complexes as photoinitiators became evident. Not only would the use of metal-based compounds allow polymerisation to be initiated by lower energy, and, therefore, more economical visible light but the absorption characteristics and reactivity of these complexes could be fine tuned to fit the specific application requirements by manipulation of the metal ligands. In fact, the recent commercialisation of the first two organo-metallic photoinitiators, a titanocene (see p. 347) and a (cyclopentadienyl)(arene)iron(II) salt (see p. 359), bears testimony to the mounting importance and versatility of metal complexes as latent sources of radicals and/or Lewis acids. The purpose of this chapter is to provide an overview of photopolymerisation with metal species, whether they be metal ions, inorganic or organo-metallic complexes.
Download or read book Radiation Curing in Polymer Science and Technology written by Jean-Pierre Fouassier and published by Springer Science & Business Media. This book was released on 1993-07-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume Four discusses the applications of radiation curing and provides a synopsis of the latest research in coatings; graphic arts; microelectronics; optical fibres; adhesives; 3D machining; membranes and holographic optical elements as well as considering the worldwide trends in the market.
Download or read book Photoinitiators for Polymer Synthesis written by Jean-Pierre Fouassier and published by John Wiley & Sons. This book was released on 2013-01-02 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoinitiating systems for polymerization reactions are largely encountered in a variety of traditional and high-tech sectors, such as radiation curing, (laser) imaging, (micro)electronics, optics, and medicine. This book extensively covers radical and nonradical photoinitiating systems and is divided into four parts: * Basic principles in photopolymerization reactions * Radical photoinitiating systems * Nonradical photoinitiating systems * Reactivity of the photoinitiating system The four parts present the basic concepts of photopolymerization reactions, review all of the available photoinitiating systems and deliver a thorough description of the encountered mechanisms. A large amount of experimental and theoretical data has been collected herein. This book allows the reader to gain a clear understanding by providing a general discussion of the photochemistry and chemistry involved. The most recent and exciting developments, as well as the promising prospects for new applications, are outlined.
Download or read book Radiation Curing written by R. S. Davidson and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a very readable review on the exciting, advancing technology of radiation curing. The principles upon which the technology is based, the equipment that is used and the materials which make up a radiation curable formulation are described. The applications of radiation curing are set to expand. Current applications for radiation curing are all discussed in this review, with principle material types outlined. The review is well referenced to facilitate further reading. It is accompanied by around 400 abstracts from the Rapra Polymer Library database, most of which are cited in the d104.
Download or read book Photoinitiators written by Jean-Pierre Fouassier and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoinitiators A comprehensive text that covers everything from the processes and mechanisms to the reactions and industrial applications of photoinitiators Photoinitiators offers a wide-ranging overview of existing photoinitiators and photoinitiating systems and their uses in ever-growing green technologies. The authors—noted experts on the topic—provide a concise review of the backgrounds in photopolymerization and photochemistry, explain the available structures, and examine the excited state properties, involved mechanisms, and structure, reactivity, and efficiency relationships. The text also contains information on the latest developments and trends in the design of novel tailor-made systems. The book explores the role of current systems in existing and emerging processes and applications. Comprehensive in scope, it covers polymerization of thick samples and in-shadow areas, polymerization under LEDs, NIR light induced thermal polymerization, photoinitiators for novel specific and improved properties, and much more. Written by an experienced and internationally renowned team of authors, this important book: Provides detailed information about excited state processes, mechanisms and design of efficient photoinitiator systems Discusses the performance of photoinitiators of polymerization by numerous examples of reactions and application Includes information on industrial applications Presents a review of current developments and challenges Offers an introduction to the background information necessary to understand thefield The role played by photoinitiators in a variety of different polymerization reactions Written for polymer chemists, photochemists, and materials scientists, Photoinitiators will also earn a place in the libraries of photochemists seeking an authoritative, one-stop guide to the processes, mechanisms, and industrial applications of photoinitiators.
Download or read book Radiation Technology for Polymers written by Jiri George Drobny and published by CRC Press. This book was released on 2002-11-25 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industrial use of ultraviolet (UV) and electron beam (EB) radiation is growing rapidly and now penetrates an ever-widening range of applications, including electronics, printing, packaging. Resources and references for seasoned professionals abound, but few effectively introduce the field to newcomers or provide fast access to specifics on UV a
Download or read book Industrial Photoinitiators written by W. Arthur Green and published by CRC Press. This book was released on 2010-04-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of photoinitiators in the UV curing process shows remarkable possibilities in myriad applications. Highlighting critical factors such as reactivity, cure speeds, and application details, Industrial Photoinitiators: A Technical Guide is a practical, accessible, industrially oriented text that explains the theory, describes the products, and
Download or read book Radiation Curing in Polymer Science and Technology written by Jean-Pierre Fouassier and published by Springer. This book was released on 1993-07-31 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume Four discusses the applications of radiation curing and provides a synopsis of the latest research in coatings; graphic arts; microelectronics; optical fibres; adhesives; 3D machining; membranes and holographic optical elements as well as considering the worldwide trends in the market.
Download or read book Radiation Curing in Polymer Science and Technology written by Jean-Pierre Fouassier and published by Springer. This book was released on 1993-07-31 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume three deals specifically with the role of monomers and resins in radiation curing. The nature of the backbone of ologomers leads to the ultimate physical or chemical properties of the UV-cured material. This chapter also covers aspects of the chemistry of these compounds in relation to their end uses.
Download or read book Photopolymerisation and Photoimaging Science and Technology written by N.S. Allen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Technology for Polymers Second Edition written by Jiri George Drobny and published by CRC Press. This book was released on 2010-05-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Radiation Technology for Polymers set the standard as a valuable, time-saving resource offering systematic fundamental information about industrial radiation technologies. Raising the bar even further, Radiation Technology for Polymers, Second Edition explores emerging applications of ultraviolet (UV) and electron beam (EB) radiation to polymer processing, detailing significant changes in the field since the first publication. Presents important new processing and engineering data from selected commercial products Since the publication of the previous edition, many technological developments have taken place, new applications and products have been developed and commercialized, and some already established ones have been discontinued. This book updates changes, trends, and general issues in radiation technology. It presents vital, cutting-edge information to aid further reduction of volatile organic compounds and toxic substances in the environment, develop alternative sources of energy, and harness energy in both medical and industrial applications. The author considers novel uses of UV/EB technology in: Equipment and instrumentation developments in automotive, electronics, and wood-processing industries Applications used in waterborne coatings and adhesives, film modifications, high-performance coatings, and inkjet technology Processing of coatings, paints, inks, and adhesives, as well as thermoplastics and elastomers in film, sheet, and other forms This reference discusses new uses for UV and EB irradiation, the response of polymers to irradiation, tests related to dosimetry and radiometry, and related safety and hygiene. It is also fortified with new problems and worked solutions, as well appendices with supplementary information on equipment manufacturers, raw materials suppliers, and principles of green chemistry and sustainability.
Download or read book Radiation Curing of Polymeric Materials written by Charles E. Hoyle and published by . This book was released on 1990 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume examines both fundamental and applied aspects of UV and EB chemistries in several areas, particularly coatings materials. It offers an overall perspective of the subject, and provides direct insight into the future of this rapidly developing field. Its 36 chapters are divided into six sections, covering photoinitiators, novel radiation photocurable systems, properties of radiation-cured materials, photodegradation of radiation-cured films, radiation curing of cationic polymerization, laser-initiated polymerization, and high-energy radiation curing. A brief summary appears at the beginning of each section.
Download or read book Radiation Curing written by Patrick Glöckner and published by Vincentz Network GmbH & Co KG. This book was released on 2009-01-15 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book, a combination of theory and practice, provides comprehensive knowledge in the field of radiation curing and support for your daily work. It offers guidance on how to select raw materials and features a troubleshooting chapter which provides concrete answers to possible problems." "This book is aimed towards formulators in the field of radiation curing, students and young professionals in coatings and printing inks with no previous experience of radiation curing and all readers who have an interest in and enjoy reading about the theory and practice of one of the fastest-growing technologies." --Book Jacket.
Download or read book Radiation Curing in Polymer Science and Technology Photoinitiating systems written by Jean-Pierre Fouassier and published by Elsevier Science & Technology. This book was released on 1993 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this four-volume, multi-author reference work is to provide a comprehensive guide to the radiation curing field. Volume Two is devoted to the chemistry of photoinitiators, presenting and discussing basic concepts and the reactivity of typical systems.
Download or read book Radiation Curing of Polymers written by D. R. Randell and published by . This book was released on 1987 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
