Download or read book Radiation Asymmetries During Disruptions on DIII D Caused by Massive Gas Injection written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major challenges that the ITER tokamak will have to face during its operations are disruptions. During the last few years, it has been proven that the global consequences of a disruption can be mitigated by the injection of large quantities of impurities. But one aspect that has been difficult to study was the possibility of local effects inside the torus during such injection that could damage a portion of the device despite the global heat losses and generated currents remaining below design parameter. 3D MHD simulations show that there is a potential for large toroidal asymmetries of the radiated power during impurity injection due to the interaction between the particle injection plume and a large n=1 mode. Another aspect of 3D effects is the potential occurrence of Vertical Displacement Events (VDE), which could induce large poloidal heat load asymmetries. This potential deleterious effect of 3D phenomena has been studied on the DIII-D tokamak thanks to the implementation of a multi-location massive gas injection (MGI) system as well as new diagnostic capabilities. This study showed the existence of a correlation between the location of the n=1 mode and the local heat load on the plasma facing components but shows also that this effect is much smaller than anticipated (peaking factor of ~1.1 vs 3-4 according to the simulations). There seems to be no observable heat load on the first wall of DIII-D at the location of the impurity injection port as well as no significant radiation asymmetries whether one or 2 valves are fired. This study enabled the first attempt of mitigation of a VDE using impurity injection at different poloidal locations. The results showed a more favorable heat deposition when the VDE is mitigated early (right at the onset) by impurity injection. As a result, no significant improvement of the heat load mitigation efficiency has been observed for late particle injection whether the injection is done "in the way" of the VDE (upward VDE mitigated by injection from the upper part of the vessel vs the lower part) or not.

Download or read book Radiation Asymmetries During the Thermal Quench of Massive Gas Injection Disruptions in JET written by M. Lehnen and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book DIII D Studies of Massive Gas Injection Fast Shutdowns for Disruption Mitigation written by D. Gray and published by . This book was released on 2006 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Injection of massive quantities of gas is a promising technique for fast shutdown of ITER for the purpose of avoiding divertor and first wall damage from disruptions. Previous experiments using massive gas injection (MGI) to terminate discharges in the DIII-D tokamak have demonstrated rapid shutdown with reduced wall heating and halo currents (relative to natural disruptions) and with very small runaway electron (RE) generation [1]. Figure 1 shows time traces which give an overview of shutdown time scales. Typically, of order 5 x 10{sup 22} Ar neutrals are fired over a pulse of 25 ms duration into stationary (non-disrupting) discharges. The observed results are consistent with the following scenario: within several ms of the jet trigger, sufficient Ar neutrals are delivered to the plasma to cause the edge temperature to collapse, initiating the inward propagation of a cold front. The exit flow of the jet [Fig. 1(a)] has a {approx} 9 ms rise time; so the quantity of neutrals which initiates the edge collapse is small (10{sup 20}). When the cold front reaches q {approx} 2 surface, global magnetohydrodynamic (MHD) modes are destabilized [2], mixing hot core plasma with edge impurities. Here, q is the safety factor. Most (90%) of the plasma thermal energy is lost via impurity radiation during this thermal quench (TQ) phase. Conducted heat loads to the wall are low because of the cold edge temperature. After the TQ, the plasma is very cold (of order several eV), so conducted wall (halo) currents are low, even if the current channel contacts the wall. The plasma current profile broadens and begins decaying resistively. The decaying current generates a toroidal electric field which can accelerate REs; however, RE beam formation appears to be limited in MGI shutdowns. Presently, it is thought that the conducted heat flux and halo current mitigation qualities of the MGI shutdown technique will scale well to a reactor-sized tokamak. However, because of the larger RE gain from avalanching and the presence of a RE seed population due to Compton-scattered fast electrons, it is possible that a RE beam can be formed well into the CQ, after the flux surfaces initially destroyed by the TQ MHD have had time to heal. Crucial MGI issues to be studied in present devices are therefore the formation, amplification, and transport of RE and the transport of impurities into the core plasma (important because the presence of impurities can, via collisional drag, help suppress RE amplification). In the study of impurity transport, both neutral delivery (directly driven into the core by the jet pressure) and ion delivery (mixed into the core by MHD) are of interest, as both contribute to RE drag. Here, three new results relevant to RE suppression from MGI are presented: (1) evidence is presented that neutral jet propagation is stopped by toroidal magnetic field pressure, (2) MGI appears to cause the CQ to begin before sufficient impurities have been injected for complete collisional suppression of RE, and (3) flux surface destruction over the region q {le} 2 occurs during the TQ. The first result suggests that neutrals cannot be delivered to the core of large tokamak discharges by MGI, even during the CQ. The second result indicates that (at least for argon MGI in DIII-D), insufficient impurities (either neutral or ion) are delivered for collisional suppression of RE at the start of the CQ. The last result suggests that the destruction of good field lines resulting from MGI is quite extensive and should be sufficient to prevent RE formation, at least at the start of the CQ.

Download or read book Characterization of MHD Activity and Its Influence on Radiation Asymmetries During Massive Gas Injection in DIII D written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements from the DIII-D tokamak show that toroidal radiation asymmetries during fast shutdown by massive gas injection (MGI) are largely driven by n = 1 magnetohydrodynamic modes during the thermal quench. The phenomenology of these modes, which are driven unstable by pro le changes as the thermal energy is quenched, is described based on detailed magnetic measurements. Here, the toroidal evolution of the dominantly n = 1 perturbation is understood to be a function of three parameters: the location of the MGI port, pre-MGI plasma rotation, and n = 1 error elds. Here, the resulting level of radiation asymmetry in these DIII-D plasmas is modest, with a toroidal peaking factor (TPF) of 1:2 ± 0:1 for the total thermal quench energy and 1:4 ± 0:3 for the peak radiated power, both of which are below the estimated limit for ITER (TPF ≈ 2).

Download or read book DIII D Studies of Massive Gas Injection Fast Shutdowns for Disruption Mitigation written by and published by . This book was released on 2006 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Injection of massive quantities of gas is a promising technique for fast shutdown of ITER for the purpose of avoiding divertor and first wall damage from disruptions. Previous experiments using massive gas injection (MGI) to terminate discharges in the DIII-D tokamak have demonstrated rapid shutdown with reduced wall heating and halo currents (relative to natural disruptions) and with very small runaway electron (RE) generation [1]. Figure 1 shows time traces which give an overview of shutdown time scales. Typically, of order 5 x 1022 Ar neutrals are fired over a pulse of 25 ms duration into stationary (non-disrupting) discharges. The observed results are consistent with the following scenario: within several ms of the jet trigger, sufficient Ar neutrals are delivered to the plasma to cause the edge temperature to collapse, initiating the inward propagation of a cold front. The exit flow of the jet [Fig. 1(a)] has a (almost equal to) 9 ms rise time; so the quantity of neutrals which initiates the edge collapse is small (102°). When the cold front reaches q (almost equal to) 2 surface, global magnetohydrodynamic (MHD) modes are destabilized [2], mixing hot core plasma with edge impurities. Here, q is the safety factor. Most (90%) of the plasma thermal energy is lost via impurity radiation during this thermal quench (TQ) phase. Conducted heat loads to the wall are low because of the cold edge temperature. After the TQ, the plasma is very cold (of order several eV), so conducted wall (halo) currents are low, even if the current channel contacts the wall. The plasma current profile broadens and begins decaying resistively. The decaying current generates a toroidal electric field which can accelerate REs; however, RE beam formation appears to be limited in MGI shutdowns. Presently, it is thought that the conducted heat flux and halo current mitigation qualities of the MGI shutdown technique will scale well to a reactor-sized tokamak. However, because of the larger RE gain from avalanching and the presence of a RE seed population due to Compton-scattered fast electrons, it is possible that a RE beam can be formed well into the CQ, after the flux surfaces initially destroyed by the TQ MHD have had time to heal. Crucial MGI issues to be studied in present devices are therefore the formation, amplification, and transport of RE and the transport of impurities into the core plasma (important because the presence of impurities can, via collisional drag, help suppress RE amplification). In the study of impurity transport, both neutral delivery (directly driven into the core by the jet pressure) and ion delivery (mixed into the core by MHD) are of interest, as both contribute to RE drag.

Download or read book Xiu xiang ju xian zhen gu ci written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book DISRUPTION MITIGATION USING HIGH PRESSURE NOBLE GAS INJECTION ON DIII D written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: High-pressure gas jet injection of neon and argon is used to mitigate the deleterious effects from tokamak disruptions. Thermal loading of the divertor surfaces, vessel stress from poloidal halo currents and the buildup and loss of relativistic electrons to the wall are all greatly reduced or eliminated. The gas jet penetrates through to the central plasma as a neutral species at its sonic velocity[approx] 300-500 m/s. The injected impurity species radiate> 95% of the plasma stored energy, accompanied by a 500-fold increase the total electron inventory in the plasma volume, thus decreasing localized heating at the divertor targets. The poloidal halo currents at the wall are reduced because of the rapid cooling and the slow movement of the plasma toward the wall during the current quench. When a sufficient quantity of gas is injected, the extremely large total (free+ bound) electron density inhibits runaway electrons in the current quench, as predicted. A physical model of radiative cooling has been developed and is validated against DIII-D experiments. The model shows that gas jet mitigation, including runaway suppression, extrapolates favorably to burning plasmas where disruption damage would be more severe. The use of real-time detection of the onset of a disruption to trigger massive gas injection and to mitigate the ensuing damage is demonstrated.

Download or read book Monte Carlo Principles and Neutron Transport Problems written by Jerome Spanier and published by Courier Corporation. This book was released on 2008-01-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-part treatment introduces the general principles of the Monte Carlo method within a unified mathematical point of view, applying them to problems in neutron transport. It describes several efficiency-enhancing approaches, including the method of superposition and simulation of the adjoint equation based on reciprocity. The first half of the book presents an exposition of the fundamentals of Monte Carlo methods, examining discrete and continuous random walk processes and standard variance reduction techniques. The second half of the text focuses directly on the methods of superposition and reciprocity, illustrating their applications to specific neutron transport problems. Topics include the computation of thermal neutron fluxes and the superposition principle in resonance escape computations.

Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.

Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

Download or read book Introduction to Plasma Physics written by R.J Goldston and published by CRC Press. This book was released on 2020-07-14 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plasma Physics is the standard text for an introductory lecture course on plasma physics. The text’s six sections lead readers systematically and comprehensively through the fundamentals of modern plasma physics. Sections on single-particle motion, plasmas as fluids, and collisional processes in plasmas lay the groundwork for a thorough understanding of the subject. The authors take care to place the material in its historical context for a rich understanding of the ideas presented. They also emphasize the importance of medical imaging in radiotherapy, providing a logical link to more advanced works in the area. The text includes problems, tables, and illustrations as well as a thorough index and a complete list of references.

Download or read book MDCT written by Mannudeep K. Kalra and published by Springer Science & Business Media. This book was released on 2009-11-16 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: "MDCT: From Protocols to Practice" tackles contemporary and topical issues in MDCT technology and applications. As an updated edition of MDCT: A Practical Approach, this volume offers new content as well as revised chapters from the previous volume. New chapters discuss important topics such as imaging of children and obese subjects, the use of contrast medium in pregnant women, coronary MDCT angiography, and PET/CT in abdominal and pelvic malignancies. Furthermore an Appendix with over 50 updated MDCT scanning protocols completes this publication. The book emphasizes the practical aspects of MDCT, making it an invaluable source of information for radiologists, residents, medical physicists, and radiology technologists in everyday clinical practice.

Download or read book Theory of Fusion Plasmas written by Olivier Sauter and published by American Institute of Physics. This book was released on 2008-12-02 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Joint Varenna-Lausanne International Workshop on Theory of Fusion Plasmas takes place every other year in a place particularly favorable for informal and in depth discussions. Invited and contributed papers present state-of-the art researches in theoretical plasma physics, covering all domains relevant to fusion plasmas. This workshop always allows a fruitful mix of experienced researchers and students, to allow for a better understanding of the key theoretical physics models and applications, such as: Theoretical issues related to burning plasmas; Anomalous Transport (Turbulence, Coherent Structures, Microinstabilities) RF Heating and Current Drive; Macroinstabilities; Plasma-Edge Physics and Divertors; Fast particles instabilities.

Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Download or read book Solar Prominences written by Jean-Claude Vial and published by Springer. This book was released on 2014-11-24 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the latest research results on solar prominences, including new developments on e.g. chirality, fine structure, magnetism, diagnostic tools and relevant solar plasma physics. In 1875 solar prominences, as seen out of the solar limb, were described by P.A. Secchi in his book Le Soleil as "gigantic pink or peach-flower coloured flames". The development of spectroscopy, coronagraphy and polarimetry brought tremendous observational advances in the twentieth century. The authors present and discuss exciting new challenges (resulting from observations made by space and ground-based telescopes in the 1990s and the first decade of the 21st century) concerning the diagnostics of prominences, their formation, their life time and their eruption along with their impact in the heliosphere (including the Earth). The book starts with a general introduction of the prominence “object” with some historical background on observations and instrumentation. In the next chapter, the various forms of prominences are described with a thorough attempt of classification. Their thermodynamic (and velocity) properties are then derived with emphasis on the methods (and their limits) used. This goes from the simplest optically thin case to the heavy radiative treatment of plasmas out of local thermodynamic equilibrium. The following chapters are devoted to the magnetic field measurements and indirect derivation. A new branch of diagnostic tools, the seismology, is presented along with some MHD basics. This allows to better understand the propagation of waves, the energy and force equilibria. Both small-scale and large-scale studies and their relationship are presented. The importance of the newly discovered cavities is stressed in the context of prominence destabilization. The issues of prominence formation and eruption, their connection with flares and Coronal Mass Ejections and their impact on the Earth are addressed on the basis of the latest results. Finally, an exciting new area of research is unveiled with the newly discovered evidence of similar manifestations in the Universe and their possible impact on the habitability of exoplanets. References to the basic physics (where necessary) are provided and the proposed web sites addresses will allow the reader to load exciting movies. The book is aimed at advanced students in astrophysics, post-graduates, solar physicists and more generally astrophysicists. Amateurs will enjoy the many new images which go with the text.

Download or read book Climate Intervention written by National Research Council and published by National Academies Press. This book was released on 2015-06-23 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing problem of changing environmental conditions caused by climate destabilization is well recognized as one of the defining issues of our time. The root problem is greenhouse gas emissions, and the fundamental solution is curbing those emissions. Climate geoengineering has often been considered to be a "last-ditch" response to climate change, to be used only if climate change damage should produce extreme hardship. Although the likelihood of eventually needing to resort to these efforts grows with every year of inaction on emissions control, there is a lack of information on these ways of potentially intervening in the climate system. As one of a two-book report, this volume of Climate Intervention discusses albedo modification - changing the fraction of incoming solar radiation that reaches the surface. This approach would deliberately modify the energy budget of Earth to produce a cooling designed to compensate for some of the effects of warming associated with greenhouse gas increases. The prospect of large-scale albedo modification raises political and governance issues at national and global levels, as well as ethical concerns. Climate Intervention: Reflecting Sunlight to Cool Earth discusses some of the social, political, and legal issues surrounding these proposed techniques. It is far easier to modify Earth's albedo than to determine whether it should be done or what the consequences might be of such an action. One serious concern is that such an action could be unilaterally undertaken by a small nation or smaller entity for its own benefit without international sanction and regardless of international consequences. Transparency in discussing this subject is critical. In the spirit of that transparency, Climate Intervention: Reflecting Sunlight to Cool Earth was based on peer-reviewed literature and the judgments of the authoring committee; no new research was done as part of this study and all data and information used are from entirely open sources. By helping to bring light to this topic area, this book will help leaders to be far more knowledgeable about the consequences of albedo modification approaches before they face a decision whether or not to use them.

Download or read book Theory Of Toroidally Confined Plasmas The Third Edition written by Roscoe B White and published by World Scientific Publishing Company. This book was released on 2013-11-18 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate level textbook develops the theory of magnetically confined plasma, with the aim of bringing the reader to the level of current research in the field of thermonuclear fusion. It begins with the basic concepts of magnetic field description, plasma equilibria and stability, and goes on to derive the equations for guiding center particle motion in an equilibrium field. Topics include linear and nonlinear ideal and resistive modes and particle transport. It is of use to workers in the field of fusion both for its wide-ranging account of tokamak physics and as a kind of handbook or formulary.This edition has been extended in a number of ways. The material on mode-particle interactions has been reformulated and much new information added, including methodology for Monte Carlo implementation of mode destabilization. These results give explicit means of carrying out mode destabilization analysis, in particular for the dangerous fishbone mode. A new chapter on cyclotron motion in toroidal geometry has been added, with comparisons of the analysis of resonances using guiding center results. A new chapter on the use of lithium lined walls has been added, a promising means of lowering the complexity and cost of full scale fusion reactors. A section on nonlocal transport has been added, including an analysis of Levy flight simulations of ion transport in the reversed field pinch in Padova, RFX.