Download or read book Radiating Nonuniform Transmission Line Systems and the Partial Element Equivalent Circuit Method written by Prof. Dr. Juergen Nitsch and published by John Wiley & Sons. This book was released on 2009-10-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High frequencies of densely packed modern electronic equipment turn even the smallest piece of wire into a transmission line with signal retardation, dispersion, attenuation, and distortion. In electromagnetic environments with high-power microwave or ultra-wideband sources, transmission lines pick up noise currents generated by external electromagnetic fields. These are superimposed on essential signals, the lines acting not only as receiving antennas but radiating parts of the signal energy into the environment. This book is outstanding in its originality. While many textbooks rephrase that which has been written before, this book features: an accessible introduction to the fundamentals of electromagnetics; an explanation of the newest developments in transmission line theory, featuring the transmission line super theory developed by the authors; a unique exposition of the increasingly popular PEEC (partial element equivalent circuit) method, including recent research results. Both the Transmission Line Theory and the PEEC method are well suited to combine linear structures with circuit networks. For engineers, researchers, and graduate students, this text broadens insight into the basics of electrical engineering. It provides a deeper understanding of Maxwellian-circuit-like representations of multi-conductor transmission lines, justifies future research in this field.
Download or read book Circuit Oriented Electromagnetic Modeling Using the PEEC Techniques written by Albert Ruehli and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges the gap between electromagnetics and circuits by addressing electrometric modeling (EM) using the Partial Element Equivalent Circuit (PEEC) method This book provides intuitive solutions to electromagnetic problems by using the Partial Element Equivalent Circuit (PEEC) method. This book begins with an introduction to circuit analysis techniques, laws, and frequency and time domain analyses. The authors also treat Maxwell's equations, capacitance computations, and inductance computations through the lens of the PEEC method. Next, readers learn to build PEEC models in various forms: equivalent circuit models, non-orthogonal PEEC models, skin-effect models, PEEC models for dielectrics, incident and radiate field models, and scattering PEEC models. The book concludes by considering issues like stability and passivity, and includes five appendices some with formulas for partial elements. Leads readers to the solution of a multitude of practical problems in the areas of signal and power integrity and electromagnetic interference Contains fundamentals, applications, and examples of the PEEC method Includes detailed mathematical derivations Circuit Oriented Electromagnetic Modeling Using the PEEC Techniques is a reference for students, researchers, and developers who work on the physical layer modeling of IC interconnects and Packaging, PCBs, and high speed links.
Download or read book High Power Microwave Sources and Technologies Using Metamaterials written by John W. Luginsland and published by John Wiley & Sons. This book was released on 2021-11-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the latest research avenues in the field of high-power microwave sources and metamaterials A stand-alone follow-up to the highly successful High Power Microwave Sources and Technologies, the new High Power Microwave Sources and Technologies Using Metamaterials, demonstrates how metamaterials have impacted the field of high-power microwave sources and the new directions revealed by the latest research. It’s written by a distinguished team of researchers in the area who explore a new paradigm within which to consider the interaction of microwaves with material media. Providing contributions from multiple institutions that discuss theoretical concepts as well as experimental results in slow wave structure design, this edited volume also discusses how traditional periodic structures used since the 1940s and 1950s can have properties that, until recently, were attributed to double negative metamaterial structures. The book also includes: A thorough introduction to high power microwave oscillators and amplifiers, as well as how metamaterials can be introduced as slow wave structures and other components Comprehensive explorations of theoretical concepts in dispersion engineering for slow wave structure design, including multi-transmission line models and particle-in-cell code virtual prototyping models Practical discussions of experimental measurements in dispersion engineering for slow wave structure design In-depth examinations of passive and active components, as well as the temporal evolution of electromagnetic fields High Power Microwave Sources and Technologies Using Metamaterials is a perfect resource for graduate students and researchers in the areas of nuclear and plasma sciences, microwaves, and antennas.
Download or read book Ultra Wideband Short Pulse Electromagnetics 10 written by Frank Sabath and published by Springer Science & Business Media. This book was released on 2014-02-07 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions of deep technical content and high scientific quality in the areas of electromagnetic theory, scattering, UWB antennas, UWB systems, ground penetrating radar (GPR), UWB communications, pulsed-power generation, time-domain computational electromagnetics, UWB compatibility, target detection and discrimination, propagation through dispersive media, and wavelet and multi-resolution techniques. Ultra-wideband (UWB), short-pulse (SP) electromagnetics are now being used for an increasingly wide variety of applications, including collision avoidance radar, concealed object detection, and communications. Notable progress in UWB and SP technologies has been achieved by investigations of their theoretical bases and improvements in solid-state manufacturing, computers, and digitizers. UWB radar systems are also being used for mine clearing, oil pipeline inspections, archeology, geology, and electronic effects testing. Like previous books in this series, Ultra-Wideband Short-Pulse Electromagnetics 10 serves as an essential reference for scientists and engineers working in these applications areas.
Download or read book An Analytic Theory Of Multi stream Electron Beams In Traveling Wave Tubes written by Alexander Figotin and published by World Scientific. This book was released on 2020-10-29 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Traveling Wave Tubes (TWT) is a powerful vacuum electronic device used to amplify radio-frequency (RF) signals as well as numerous applications such as radar, television and telephone satellite communications. This monograph is devoted to the author's original theoretical developments in the theory of a traveling wave tube (TWT).Most of the monograph is the author's original work on an analytical theory of TWTs. It is a constructive Lagrangian field theory of TWT in which the electron beam (e-beam) is represented by one-dimensional multi-stream electron flow and the guiding slow-wave structure is represented by possibly non-uniform multi-transmission line (MTL). The proposed analytic theory accounts for a number of electron plasma phenomena including space-charge effects such as electron-to-electron repulsion (debunching), convective instabilities, wave-particle interaction, amplifying waves and more. It allows, in particular, to (i) identify origins of the wave-particle interaction and the system convective instability (exponential growth); (ii) evaluate the energy transfer rate from the e-beam to the electromagnetic radiation; (iii) identify instability modal branches which under condition of sufficiently strong coupling between the e-beam and the MTL can cover ideally all frequencies.
Download or read book Transient Signals on Transmission Lines written by Andrew Peterson and published by Springer Nature. This book was released on 2023-12-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is tutorial for electrical and computer engineers on the topic of transient signals on transmission lines. Emphasis has been placed on aspects of the subject that have application to signal integrity and high-speed digital circuit design issues, including proper termination schemes to avoid impedance discontinuities, reactive and nonlinear loads, and an introduction to crosstalk. The coverage focuses on the very important topic of transmission line transients which have been de-emphasized in most current textbooks. This book is prepared to supplement traditional texts for advanced students studying electromagnetics and for a vast array of practicing electrical engineers, computer engineers and material scientists with interests in signal integrity and high-speed digital design. In this second edition, examples and new problems have been added throughout. A new chapter on differential transmission lines has also been incorporated
Download or read book Transient Signals on Transmission Lines written by Andrew F. Peterson and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lecture provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is intended to supplement standard textbooks for use with undergraduate students in electrical engineering or computer engineering. The contents should also be of value to practicing engineers with interests in signal integrity and high-speed digital design. Table of Contents: Introduction / Solution of the Transmission Line Equations / DC Signals on a Resistively Loaded Transmission Line / Termination Schemes / Equivalent Circuits, Cascaded Lines, and Fan-Outs / Initially-Charged Transmission Lines / Finite Duration Pulses on Transmission Lines / Transmission Lines with Reactive Terminations / Lines with Nonlinear Loads / Crosstalk on Weakly Coupled Transmission Lines
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2009 with total page 1922 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmission Lines and Lumped Circuits written by Giovanni Miano and published by Elsevier. This book was released on 2001-02-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of transmission lines is a classical topic of electrical engineering. Recently this topic has received renewed attention and has been a focus of considerable research. This is because the transmisson line theory has found new and important applications in the area of high-speed VLSI interconnects, while it has retained its significance in the area of power transmission. In many applications, transmission lines are connected to nonlinear circuits. For instance, interconnects of high-speed VLSI chips can be modelled as transmission lines loaded with nonlinear elements. These nonlinearities may lead to many new effects such as instability, chaos, generation of higher order harmonics, etc. The mathematical models of transmission lines with nonlinear loads consist of the linear partial differential equations describing the current and voltage dynamics along the lines together with the nonlinear boundary conditions imposed by the nonlinear loads connected to the lines. These nonlinear boundary conditions make the mathematical treatment very difficult. For this reason, the analysis of transmission lines with nonlinear loads has not been addressed adequately in the existing literature. The unique and distinct feature of the proposed book is that it will present systematic, comprehensive, and in-depth analysis of transmission lines with nonlinear loads. A unified approach for the analysis of networks composed of distributed and lumped circuits A simple, concise and completely general way to present the wave propagation on transmission lines, including a thorough study of the line equations in characteristic form Frequency and time domain multiport representations of any linear transmission line A detailed analysis of the influence on the line characterization of the frequency and space dependence of the line parameters A rigorous study of the properties of the analytical and numerical solutions of the network equations The associated discrete circuits and the associated resisitive circuits of transmission lines Periodic solutions, bifurcations and chaos in transmission lines connected to noninear lumped circuits
Download or read book Modeling and Characterization of RF and Microwave Power FETs written by Peter Aaen and published by Cambridge University Press. This book was released on 2007-06-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive exposition of FET modeling, and is a must-have resource for seasoned professionals and new graduates in the RF and microwave power amplifier design and modeling community. In it, you will find descriptions of characterization and measurement techniques, analysis methods, and the simulator implementation, model verification and validation procedures that are needed to produce a transistor model that can be used with confidence by the circuit designer. Written by semiconductor industry professionals with many years' device modeling experience in LDMOS and III-V technologies, this was the first book to address the modeling requirements specific to high-power RF transistors. A technology-independent approach is described, addressing thermal effects, scaling issues, nonlinear modeling, and in-package matching networks. These are illustrated using the current market-leading high-power RF technology, LDMOS, as well as with III-V power devices.
Download or read book Analysis of Linear Circuits written by Clayton R. Paul and published by . This book was released on 1989 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations for Microstrip Circuit Design written by Terry C. Edwards and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.
Download or read book Fundamental Numerical Methods for Electrical Engineering written by Stanislaw Rosloniec and published by Springer Science & Business Media. This book was released on 2008-07-17 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stormy development of electronic computation techniques (computer systems and software), observed during the last decades, has made possible automation of data processing in many important human activity areas, such as science, technology, economics and labor organization. In a broadly understood technology area, this developmentledtoseparationofspecializedformsofusingcomputersforthedesign and manufacturing processes, that is: – computer-aided design (CAD) – computer-aided manufacture (CAM) In order to show the role of computer in the rst of the two applications m- tioned above, let us consider basic stages of the design process for a standard piece of electronic system, or equipment: – formulation of requirements concerning user properties (characteristics, para- ters) of the designed equipment, – elaboration of the initial, possibly general electric structure, – determination of mathematical model of the system on the basis of the adopted electric structure, – determination of basic responses (frequency- or time-domain) of the system, on the base of previously established mathematical model, – repeated modi cation of the adopted diagram (changing its structure or element values) in case, when it does not satisfy the adopted requirements, – preparation of design and technological documentation, – manufacturing of model (prototype) series, according to the prepared docum- tation, – testing the prototype under the aspect of its electric properties, mechanical du- bility and sensitivity to environment conditions, – modi cation of prototype documentation, if necessary, and handing over the documentation to series production. The most important stages of the process under discussion are illustrated in Fig. I. 1. xi xii Introduction Fig. I.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coplanar Waveguide Circuits Components and Systems written by Rainee N. Simons and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of the analysis and applications of coplanar waveguides to microwave circuits and antennas The unique feature of coplanar waveguides, as opposed to more conventional waveguides, is their uniplanar construction, in which all of the conductors are aligned on the same side of the substrate. This feature simplifies manufacturing and allows faster and less expensive characterization using on-wafer techniques. Coplanar Waveguide Circuits, Components, and Systems is an engineer's complete resource, collecting all of the available data on the subject. Rainee Simons thoroughly discusses propagation parameters for conventional coplanar waveguides and includes valuable details such as the derivation of the fundamental equations, physical explanations, and numerical examples. Coverage also includes: Discontinuities and circuit elements Transitions to other transmission media Directional couplers, hybrids, and magic T Microelectromechanical systems based switches and phase shifters Tunable devices using ferroelectric materials Photonic bandgap structures Printed circuit antennas
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
