Download or read book R D Toward a Neutrino Factory and Muon Collider written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: There is considerable interest in the use of muon beams to create either an intense source of decay neutrinos aimed at a detector located 3000-7500 km away (a Neutrino Factory), or a Muon Collider that produces high-luminosity collisions at the energy frontier. R & D aimed at producing these facilities has been under way for more than 10 years. This paper will review experimental results from MuCool, MERIT, and MICE and indicate the extent to which they will provide proof-of-principle demonstrations of the key technologies required for a Neutrino Factory or Muon Collider. Progress in constructing components for the MICE experiment will also be described.

Download or read book Accelerator R D Toward Muon Collider and Neutrino Factory written by and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture, accelerate and collide high intensity beams of muons. At present, a high-luminosity multi-TeV muon collider presents a viable option for the next generation lepton-lepton collider, which is believed to be needed to fully explore high energy physics in the era following LHC discoveries. Such a collider can offer superb energy resolution, smaller size, and potentially cost and power consumption compared to multi-TeV ee− linear colliders. This article briefly reviews the motivation, design and status of accelerator R & D for Muon Collider and Neutrino Factory.

Download or read book Neutrino Factory and Muon Collider Collaboration R and D Program written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Neutrino Factory and Muon Collider Collaboration (MC) comprises some 140 scientists and engineers located at U.S. National Laboratories and Universities, and at a number of non-U.S. research institutions. In the past year, the MC R and D program has shifted its focus mainly toward the design issues related to the development of a Neutrino Factory based on a muon storage ring. In this paper the status of the various R and D activities is described, and future plans are outlined.

Download or read book Recent Progress in Neutrino Factory and Muon Collider Research Within the Muon Collaboration written by and published by . This book was released on 2003 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: We describe the status of our effort to realize a first neutrino factory and the progress made in understanding the problems associated with the collection and cooling of muons towards that end. We summarize the physics that can be done with neutrino factories as well as with intense cold beams of muons. The physics potential of muon colliders is reviewed, both as Higgs Factories and compact high energy lepton colliders. The status and timescale of our research and development effort is reviewed as well as the latest designs in cooling channels including the promise of ring coolers in achieving longitudinal and transverse cooling simultaneously. We detail the efforts being made to mount an international cooling experiment to demonstrate the ionization cooling of muons.

Download or read book Contributions to the Textual Criticism of Aristotle s Nicomachean Ethics written by Ingram Bywater and published by . This book was released on 1892 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book R D Toward Neutrino Factories and Muon Colliders written by and published by . This book was released on 2003 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: R & D aimed at the production, acceleration, and storage of intense muon beams is under way in the U.S., in Europe, and in Japan. Considerable progress has been made in the past few years toward the design of a ''Neutrino Factory'' in which a beam of 20-50 GeV mu- or mu+ is stored. Decay neutrinos from the beam illuminate a detector located roughly 3000 km from the ring. Here, we briefly describe the ingredients of a Neutrino Factory and then discuss the current R & D program and its results. A key concept in the design is ''ionization cooling, '' a process whereby the muon emittance is reduced by repeated interactions with an absorber material followed by reacceleration with high-gradient rf cavities. Plans to test this concept in the Muon Ionization Cooling Experiment (MICE) are well along and are described briefly.

Download or read book Physics Potential and Development of Muon Colliders and Neutrino Factories written by David Cline and published by American Institute of Physics. This book was released on 2000-11-17 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings report the ever increasing interest and scientific case for the muon collider and the neutrino factory. There were intense sessions on the current design of neutrino factories in Europe, Japan, and in the USA, and there is growing evidence for a low-mass Higgs boson from the precision electroweak parameters to motivate the development of a Higgs factory. The twin themes of a neutrino factory and a Higgs factory have provided a possible plan for a future program in the USA. Some of the highlights of this conference were: The very latest news on the Higgs search at LEP II, the strong case for a low-mass Higgs, the push to find SUSY particles, the neutrino mass, the interesting possibility that the SuperKamiokande results could somehow be the result of neutrino decay, the beautiful arguments for a scalar collider, the summary of the future of CERN, and particle physics in general, and the overview of the Standard Model.

Download or read book The Program in Muon and Neutrino Physics written by and published by . This book was released on 2001 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book From Neutrino Factory to Muon Collider written by and published by . This book was released on 2010 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both Muon Colliders and Neutrino Factories require a muon source capable of producing and capturing [Omicron](1021) muons/year. This paper reviews the similarities and differences between Neutrino Factory and Muon Collider accelerator complexes, the ongoing R & D needed for a Muon Collider that goes beyond Neutrino Factory R & D, and some thoughts about how a Neutrino Factory on the CERN site might eventually be upgraded to a Muon Collider.

Download or read book Neutrino Factory and Muon Collider Fellow Final Technical Report for DOE Award DE FG02 03ER41267 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: By providing an intense, well controlled, well characterized, narrow beam of muon neutrinos (?????????s) and electron antineutrinos (–?e’s) from the decay of muons (?−??2019?s) in a storage ring, a neutrino factory can advance neutrino physics beyond the current round of approved and proposed experiments using conventional neutrino beams produced from a beam of decaying pions and kaons [1, 2]. There is no other comparable single clean source of electron neutrinos (from the decay of ?+’s) or antineutrinos. A muon storage ring producing 1019 to 1021 muon decays per year should be feasible. These intense neutrino beams can be used to study neutrino oscillations and possible CP violation. An entry-level muon storage ring that could provide 1019 decays per year would allow a determination of the sign of ?m231and a first measurement of sin22?13 for favorable values of this parameter. An improved muon storage ring system that could provide 1020 muon decays per year would allow measurement of sin22?13 to 1̃0−4. A high performance muon storage ring capable of providing more than 1020 muon decays per year would allow the exciting possibility of a measurement of CP violation in the leptonic sector. An intense cold muon beam at the front end of a neutrino factory could enable a rich variety of precision muon physics, such as a more precise measurement of the muon anomalous magnetic moment (g – 2) and searches for ? -> e ? and ?−N -> e− N conversion [3]. In addition, colliding beams of ?+ and ?− in a muon collider can provide an effective ?Higgs factory? or multi-TeV center-of-mass energy collisions [4]. A muon collider will be the best way to study the Higgs bosons associated with supersymmetric theories and may be necessary to discover them. Two neutrino factory feasibility studies have been carried out in the U.S. [5, 6]. International design efforts are now under way. The International Neutrino Factory and Superbeam Scoping Study (ISS) [7] began at the NuFact05 Workshop in June 2005 with the goals of elaborating the physics case, defining the baseline options for such a facility and its neutrino detectors, and identifying the required R&D program to lay the foundations for a complete design study proposal, and an International Design Study of the Neutrino Factory is beginning. These studies entail iterative cost and technical difficulty evaluations, thereby providing guidelines for the advancing R&D program. One of the central subsystems of a neutrino factory or muon collider is the muon cooling system. The muon beam is cooled to increase the phase space density and allow the muons to pass through smaller apertures, thus reducing the cost of the following accelerator systems. This cooling is accomplished through ionization cooling, in which the beam is passed through liquid hydrogen absorbers and then accelerated in RF cavities to restore the longitudinal momentum. Ionization cooling was proposed more than twenty years ago [8] but has not yet been demonstrated in practice. The International Muon Ionization Cooling Experiment (MICE) [9, 10] seeks to build and operate a muon-cooling device of a design proposed in Feasibility Study-II [6]. In addition to cooling the muons, MICE includes apparatus to measure the performance of the device. The experiment will be carried out by a collaboration of physicists from the U.S., Europe, and Japan at the Rutherford Appleton Laboratory in the U.K. MICE will begin operation in late 2007. Successful performance of the MICE experiment will provide the understanding needed to design a complete neutrino factory, in which the muons are cooled, accelerated, circulated in a storage ring, and decay to produce the neutrino beam. The first neutrino factory might be built in the U.S., Europe, or Japan. A Muon Collider Task Force (MCTF) has recently been organized at Fermilab.

Download or read book Neutrino Factory R D in the U S written by and published by . This book was released on 2003 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: We report here on the technical progress and R & D plans of the U.S. Neutrino Factory and Muon Collider Collaboration. Programs in targetry, cooling, acceleration, and simulations are covered. U.S. activities in support of the international Muon Ionization Cooling Experiment (MICE) are also described.

Download or read book Neutrino Factory and Muon Collider Fellow written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Muons are fundamental particles like electrons but much more massive. Muon accelerators can provide physics opportunities similar to those of electron accelerators, but because of the larger mass muons lose less energy to radiation, allowing more compact facilities with lower operating costs. The way muon beams are produced makes them too large to fit into the vacuum chamber of a cost-effective accelerator, and the short muon lifetime means that the beams must be reduced in size rather quickly, without losing too many of the muons. This reduction in size is called "cooling." Ionization cooling is a new technique that can accomplish such cooling. Intense muon beams can then be accelerated and injected into a storage ring, where they can be used to produce neutrino beams through their decays or collided with muons of the opposite charge to produce a muon collider, similar to an electron-positron collider. We report on the research carried out at the University of California, Riverside, towards producing such muon accelerators, as part of the Muon Accelerator Program based at Fermilab. Since this research was carried out in a university environment, we were able to involve both undergraduate and graduate students.

Download or read book Neutrino Factory and Muon Collider Collaboration R and D Activities written by and published by . This book was released on 2001 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Neutrino Factory and Muon Collider Collaboration (MC) comprises about 140 U.S. and non-U.S. accelerator and particle physicists. The MC is carrying out an R and D program aimed at validating the critical design concepts required for the construction of such machines. We are committed to encouraging international cooperation and coordination of the R and D effort. Main activities of the MC include a Targetry program, a MUCOOL program, a component development program, and a theory and simulation effort. Moreover, the MC has participated in several feasibility studies for a complete Neutrino Factory facility, with the aim of identifying any additional R and D activities needed to prepare a Zeroth-order Design Report (ZDR) in about two years and a Conceptual Design report (CDR) about two years thereafter. In this paper, the R and D goals in each area will be indicated, and the present status and future plans of the R and D program will be described.

Download or read book Colliders and Neutrinos written by Sally Dawson and published by World Scientific. This book was released on 2008 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of theoretical advanced summer institute lectures by world experts in the field of collider physics and neutrinos, the two frontier areas of particle physics today. It is aimed at graduate students and beginning researchers, and as such, provides many pedagogical details not generally available in standard conference proceedings.

Download or read book Status of Neutrino Factory and Muon Collider R and D written by and published by . This book was released on 2001 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant worldwide R and D effort is presently directed toward solving the technical challenges of producing, cooling, accelerating, storing, and eventually colliding beams of muons. Its primary thrust is toward issues critical to a Neutrino Factory, for which R and D efforts are under way in the U.S., via the Neutrino Factory and Muon Collider Collaboration (MC); in Europe, centered at CERN; and in Japan, at KEK. Under study and experimental development are production targets handling intense proton beams (1-4 MW), phase rotation systems to reduce beam energy spread, cooling channels to reduce transverse beam emittance for the acceleration system, and storage rings where muon decays in a long straight section provide a neutrino beam for a long-baseline (3000 km) experiment. Critical experimental activities include development of very high gradient normal conducting RF (NCRF) and superconducting RF (SCRF) cavities, high-power liquid-hydrogen absorbers, and high-field superconducting solenoids. Components and instrumentation that tolerate the intense decay products of the muon beam are being developed for testing. For a high-luminosity collider, muons must be cooled longitudinally as well as transversely, requiring an emittance exchange scheme. In addition to the experimental R and D effort, sophisticated theoretical and simulation tools are needed for the design. Here, the goals, present status, and future R and D plans in these areas will be described.

Download or read book Status of Neutrino Factory R D Within the Muon Collaboration written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors describe the current status of the research within the Muon Collaboration towards realizing a Neutrino Factory. The authors describe briefly the physics motivation behind the neutrino factory approach to studying neutrino oscillations and the longer term goal of building the Muon Collider. The benefits of a step by step staged approach of building a proton driver, collecting and cooling muons followed by the acceleration and storage of cooled muons are emphasized. Several usages of cooled muons open up at each new stage in such an approach and new physics opportunities are realized at the completion of each stage.

Download or read book Muon Colliders and Neutrino Factories written by and published by . This book was released on 2010 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate [Omicron](1021) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R & D for Neutrino Factories and Muon Colliders.