Download or read book Quick Guide to Truck Aerodynamics written by Great Britain. Department of Transport and published by . This book was released on 2009 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings from the United Engineering Foundation Conference on The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held December 2-6, 2002, in Monterey, California. This Department of Energy, United Engineering Foundation, and industry sponsored conference brought together 90 leading engineering researchers from around the world to discuss the aerodynamic drag of heavy vehicles. Participants from national labs, academia, and industry, including truck manufacturers, discussed how computer simulation and experimental techniques could be used to design more fuel efficient trucks, buses, and trains. Conference topics included comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from the Department of Energy sponsored and other wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry were presented, along with their use in evaluating drag reduction devices. We would like to thank the UEF conference organizers for their dedication and quick response to sudden deadlines. In addition, we would like to thank all session chairs, the scientific advisory committee, authors, and reviewers for their many hours of dedicated effort that contributed to a successful conference and resulted in this document of the conference proceedings. We also gratefully acknowledge the support received from the United Engineering Foundation, the US Department of Energy, Lawrence Livermore National Laboratory, Volvo Trucks America, International Truck and Engine Corporation, and Freightliner LLC.

Download or read book The Aerodynamics of Heavy Vehicles III written by Andreas Dillmann and published by Springer. This book was released on 2015-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future. This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

Download or read book Energy Efficiency written by Steven Fawkes and published by Routledge. This book was released on 2016-04-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy risk has reappeared on the corporate and social agenda with a bang and the complexity of the issues has increased many-fold since the days of the last great wave of concern following the oil crises of the 1970s. Steven Fawkes’ Energy Efficiency is a comprehensive guide for managers and policy-makers to the fundamental questions underpinning energy-efficiency and our responses to it: ¢ what do we really mean by energy efficiency? ¢ what is the potential (in different dimensions)? ¢ why it is important? ¢ what management processes lead to optimisation of energy efficiency? ¢ what technologies are useful for improving energy efficiency? ¢ what policies can be used to promote energy efficiency? ¢ how can energy efficiency be financed? ¢ how can energy suppliers engage with energy efficiency? The result is the most comprehensive review to-date of the barriers and opportunities associated with improving energy efficiency. Clearly written and erudite, Steven Fawkes addresses every aspect of energy efficiency, including the huge and vitally important untapped potential offered by effective energy management and the application of existing technology. He also identifies barriers, such as the rebound effect and how they can be mitigated and he provides a comprehensive review of innovative energy efficiency financing options. This book is a ’must read’ for anyone with an interest in energy supply and demand reduction.

Download or read book A Reassessment of Heavy Duty Truck Aerodynamic Design Features and Priorities written by Edwin J. Saltzman and published by . This book was released on 1999 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Aerodynamics of Heavy Vehicles II Trucks Buses and Trains written by Fred Browand and published by Springer Science & Business Media. This book was released on 2008-09-30 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings for “The Aerodynamics of Heavy Vehicles II: Trucks, Buses and Trains” International Conference held in Lake - hoe, California, August 26-31, 2007 by Engineering Conferences International (ECI). Brought together were the world’s leading scientists and engineers from industry, universities, and research laboratories, including truck and high-speed train manufacturers and operators. All were gathered to discuss computer simu- tion and experimental techniques to be applied for the design of the more efficient trucks, buses and high-speed trains required in future years. This was the second conference in the series. The focus of the first conference in 2002 was the interplay between computations and experiment in minimizing ae- dynamic drag. The present proceedings, from the 2007 conference, address the development and application of advanced aerodynamic simulation and experim- tal methods for state-of-the-art analysis and design, as well as the development of new ideas and trends holding promise for the coming 10-year time span. Also - cluded, are studies of heavy vehicle aerodynamic tractor and trailer add-on - vices, studies of schemes to delay undesirable flow separation, and studies of - derhood thermal management.

Download or read book Heavy Duty Truck Aerodynamics written by Richard A. Drollinger and published by . This book was released on 1987-01-01 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles

Download or read book Road Vehicle Aerodynamic Design written by R. H. Barnard and published by Longman Publishing Group. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a comprehensive introduction to road vehicle aerodynamic design for students, engineers and designers working in the automotive field.

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Download or read book Race Car Aerodynamics written by J Katz and published by Robert Bentley, Incorporated. This book was released on 1996-03-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to summarize the secrets of the rapidly developing field of high-speed vehicle design. From F1 to Indy Car, Drag and Sedan racing, this book provides clear explanations for engineers who want to improve their design skills and enthusiasts who simply want to understand how their favorite race cars go fast. Explains how aerodynamics win races, why downforce is more important than streamlining and drag reduction, designing wings and venturis, plus wind tunnel designs and more.

Download or read book Challenges and Opportunities in Industrial and Mechanical Engineering A Progressive Research Outlook written by S M Pandey and published by CRC Press. This book was released on 2024-06-24 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present time Industry 4.0 is the need of all industries because it connects industries to AI, high productivity, safety, and flexibility, ensures the 100% utilization of resources across diverse manufacturing systems, and could accelerate normal manufacturing systems to advanced manufacturing systems by using robotics, additive manufacturing, and many more. In this book, the collection of selected papers is constituted from the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), which was at the National Institute of Technology (NIT), Patna, India from August 5 to 7, 2021. This conference brings together all academic people, industry experts, and researchers from India as well as abroad for involving thoughts on the needs, challenges, new technology, opportunities threats in the current transformational field of aspire. This book deliberates on several elements and their relevance to hard-core areas of industrial and mechanical engineering including design engineering, production engineering, indus trial engineering, automobile engineering, thermal and fluid engineering, mechatronics control robotics, interdisciplinary, and many new emerging topics that keep potential in several areas of applications. This book focuses on providing versatile knowledge of cut ting-edge practices to all readers, helping to develop a clear vision toward Industry 4.0, robotics automation, and additive manufacturing in this demanding and evolving time. The book will be a treasured reference for students, researchers, and professionals inter ested in mechanical engineering and allied fields.

Download or read book Introduction to Aerodynamics written by Gale M. Craig and published by . This book was released on 2002 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerodynamics of Road Vehicles written by Wolf-Heinrich Hucho and published by Elsevier. This book was released on 2013-10-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics of Road Vehicles details the aerodynamics of passenger cars, commercial vehicles, sports cars, and race cars; their external flow field; as well as their internal flow field. The book, after giving an introduction to automobile aerodynamics and some fundamentals of fluid mechanics, covers topics such as the performance and aerodynamics of different kinds of vehicles, as well as test techniques for their aerodynamics. The book also covers other concepts related to automobiles such as cooling systems and ventilations for vehicles. The text is recommended for mechanical engineers and phycisists in the automobile industry who would like to understand more about aerodynamics of motor vehicles and its importance on the field of road safety and automobile production.

Download or read book Modifying the Aerodynamics of Your Road Car written by Julian Edgar and published by Veloce Publishing. This book was released on 2019-01-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modifying the Aerodynamics of Your Road Car is a unique handbook that assumes no starting knowledge of vehicle aerodynamics. It begins with simple ideas and finishes with sophisticated and effective aerodynamic modifications that work. Three major chapters cover on-road testing techniques that give you all the information you need to decide what modifications you should make - and, after you’ve made them, how well they work. Low-cost techniques allow you to visualize the patterns of airflow over your car so that you can actually see the problem areas that need improvement. Uniquely, you’re also shown how to measure aerodynamic pressures, so you can determine which body surfaces are creating lift, drag and downforce. Want to work out where a wing should be placed? On-road testing to find that out is covered as well. The book also shows you how to measure downforce to see if that wing is actually working! If you wish to reduce drag, more than ten different areas are covered. Reducing frontal area, lowering cooling system drag, optimizing vehicle ride height and rake, reducing the strength of the wake, achieving clean airflow separation and optimizing wheel designs are all covered using the latest research findings. And if you’re a performance driver, there’s a major chapter devoted to reducing lift and improving stability. This chapter includes the design and development of undertrays and diffusers, wings and spoilers. The example car developed measurable downforce when fitted with an undertray and rear diffuser, something that transformed its on-road handling. The author has been writing about the aerodynamics of road cars for more than 25 years. He is also an experienced and proficient car modifier who has performed numerous aerodynamic modifications and upgrades to his own cars. The book’s technical consultant, RH Barnard, is an acknowledged world leading automotive aerodynamicist. If you want a practical, hands-on guide that demystifies and explains car aerodynamics, and shows you how to make effective aerodynamic modifications to your car, this book is for you.

Download or read book Aerodynamics of Road Vehicles written by Thomas Christian Schuetz and published by SAE International. This book was released on 2015-12-30 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The detailed presentation of fundamental aerodynamics principles that influence and improve vehicle design have made Aerodynamics of Road Vehicles the engineer’s “source” for information. This fifth edition features updated and expanded information beyond that which was presented in previous releases. Completely new content covers lateral stability, safety and comfort, wind noise, high performance vehicles, helmets, engine cooling, and computational fluid dynamics. A proven, successful engineering design approach is presented that includes: • Fundamentals of fluid mechanics related to vehicle aerodynamics • Essential experimental results that are the ground rules of fluid mechanics • Design strategies for individual experimental results • General design solutions from combined experimental results The aerodynamics of passenger cars, commercial vehicles, motorcycles, sports cars, and race cars is dealt with in detail, inclusive of systems, testing techniques, measuring and numerical aerodynamics methods and simulations that significantly contribute to vehicle development. Aerodynamics of Road Vehicles is an excellent reference tool and an indispensable source for the industry’s vehicle engineers, designers, and researchers, as well as for enthusiasts, students, and those working in academia or government regulatory agencies.

Download or read book Fairing Well written by Christian Gelzer and published by . This book was released on 2011 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: