Download or read book Quasioptical Systems written by Paul F. Goldsmith and published by Wiley-IEEE Press. This book was released on 1998-01-02 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The increasing commercial use of millimeter wavelengths for remote sensing, communications, and radar systems has driven the need for new low-cost, high performance systems, and with it, the need for quasioptical systems.Combining a general introduction to Gaussian beams and quasioptical propagation with practical applications, QUASIOPTICAL SYSTEMS provides a state-of-the-art treatment of the design of low-loss, broadband systems at microwave to submillimeter wavelegnths. the approach presented involved utilizing a beam with a Gaussian distribution of field strength perpendicular to its axis, which in turn propagates in a simple predictable fashion. Features include: A Convenient summary of Gaussian beam propagation formulas; Extensive coverage of present-day quasioptical components and their performance; In-depth coverage of dielectric material uses at millimeter and submillimeter wavelengths; An analysis of lenses and mirrors together with design techniques; and much more!This book will be of key interest to systems designers, antenna engineers, communications systems engineers, and researchers."

Download or read book Quasioptical Systems written by Paul F. Goldsmith and published by . This book was released on 1998 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing commercial use of millimeter wavelengths for remote sensing, communications, and radar systems has driven the need for new low-cost, high performance systems, and with it, the need for quasioptical systems.Combining a general introduction to Gaussian beams and quasioptical propagation with practical applications, QUASIOPTICAL SYSTEMS provides a state-of-the-art treatment of the design of low-loss, broadband systems at microwave to submillimeter wavelegnths. the approach presented involved utilizing a beam with a Gaussian distribution of field strength perpendicular to its axis, which in turn propagates in a simple predictable fashion. Features include: A Convenient summary of Gaussian beam propagation formulas; Extensive coverage of present-day quasioptical components and their performance; In-depth coverage of dielectric material uses at millimeter and submillimeter wavelengths; An analysis of lenses and mirrors together with design techniques; and much more!This book will be of key interest to systems designers, antenna engineers, communications systems engineers, and researchers.

Download or read book Quasioptical Systems written by Goldsmith and published by Springer. This book was released on 1998-02-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining a general introduction to Gaussian beams and quasioptical propagation with practical applications, Quasioptical Systems provides a state-of-the-art treatment of the design of low-loss, broadband systems at microwave to submillimeter wavelengths. The approach presented involves utilizing a beam with a Gaussian distribution of field strength perpendicular to its axis, which in turn propagates in a simple, predictable fashion.

Download or read book Microwave and Millimeter Wave Circuits and Systems written by Apostolos Georgiadis and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Download or read book 280GHz Quasi optical Millimeter Wave Receiver System for Collective Scattering on NSTX written by Leon Yong Lin and published by . This book was released on 2006 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quasioptical Systems Components for Terahertz Astronomy written by Dathon R. Golish and published by . This book was released on 2008 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, submillimeter and terahertz astronomy has grown rapidly and become an important new window for studying the universe. This growth has been enabled by the confluence of several technologies which make the design and fabrication of high frequency single and multi-pixel heterodyne receivers possible. This dissertation reviews the development of a new generation of terahertz instrumentation at the University of Arizona, with specific emphasis on their optical components and systems. These instruments include several receivers for the Antarctic Submillimeter Telescope and Remote Observatory (formerly installed at the South Pole), including a dual-frequency 492/810 GHz receiver called Wanda, a 4-pixel 810 GHz heterodyne array called PoleSTAR, and a 1.5 THz receiver called TREND. It also covers receivers for the Heinrich Hertz Submillimeter Telescope on Mt. Graham in southern Arizona. These receivers include a 7-pixel 345 GHz heterodyne array called DesertSTAR, a 64-pixel polarimeter/bolometer system called Hertz, and a 64-pixel 345 GHz heterodyne array called SuperCam. After reviewing these instruments, concepts for the next generation of arrays and terahertz telescopes designed for the high Atacama desert, Antarctica, high altitude balloon missions, and orbiting observatories will be presented. This dissertation will also cover other contributions made to terahertz astronomy, including the creation of a Gaussian beam propagation program to help design terahertz optical systems and an integrated optics design for a waveguide interferometer to be used as an alternative to traditional bulk optics systems.

Download or read book Quasi Optical Control of Intense Microwave Transmission written by Jay L. Hirshfield and published by Springer Science & Business Media. This book was released on 2006-02-12 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Between February 17 and 20, 2004, approximately fifty scientists from ten countries came together at the Institute of Applied Physics (IAP), Nizhny Novgorod, Russia to participate in a NATO sponsored Advanced Research Workshop whose appellation is re flected in the title of this volume, namely Quasi Optical Control of Intense Microwave Transmission. The fashionable label “quasi optical ” has come into use in recent decades to denote structures whose characteristic dimensions exceed (sometimes by large factors) the free space radiation wavelength. Such structures were and are developed to replace the traditional single eigenmode ones in situations when high frequenc ies (short wavelengths) are combined with high powers, a combination that could otherwise lead to RF breakdown and high Ohmic wall heating rates. Treatments of guided wave propagation in oversized structures is aimed at pr eserving the propagating field coherence and thus to provide efficient transmission of RF power to remote destinations such as antennas, microwave ovens, plasma chemical reactors, nuclear fusion machines, and the like.

Download or read book Diffraction and Scattering in Launchers of Quasi Optical Mode Converters for Gyrotrons written by Jens Hanspeter Flamm and published by KIT Scientific Publishing. This book was released on 2014-06-17 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work different methods for the calculation of diffraction and scattering in launchers of quasi-optical mode converters for gyrotrons are compared, ranked and extended. The extension gives the opportunity to take a tapered average radius of the waveguide antenna into account. The comparison and the extension of the fast field calculation methods for component synthesis opens the possibility to reduce diffraction and stray radiation of reliable and powerful millimeter wave sources.

Download or read book Diagnostics for Experimental Thermonuclear Fusion Reactors written by Giuseppe Gorini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1995 workshop concentrated specifically on the problems and challenges of ITER diagnostics. ITER (the International Thennonuclear Experimental Reactor, a joint venture of Europe, Japan, Russia, and the United States, presently under design) will need to measure a wide range of plasma parameters in order to reach and sustain high levels of fusion power. A list of the measurement requirements together with the parameter ranges, target measurement resolutions, and accuracies provides the starting point for selecting a list of candidate diagnostic systems.

Download or read book Millimeter Wave mmWave Communications written by Manuel García Sanchez and published by MDPI. This book was released on 2020-03-25 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The millimeter-wave frequency band (30–300 GHz) is considered a potential candidate to host very high data rate communications. First used for high capacity radio links and then for broadband indoor wireless networks, the interest in this frequency band has increased as it is proposed to accommodate future 5G mobile communication systems. The large bandwidth available will enable a number of new uses for 5G. In addition, due to the large propagation attenuation, this frequency band may provide some additional advantages regarding frequency reuse and communication security. However, a number of issues have to be addressed to make mm-wave communications viable. This book collects a number of contributions that present solutions to these challenges.

Download or read book Very High Frequency VHF ESR EPR written by Oleg Grinberg and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Very High Frequency EPR (VHF EPR) or sometimes called Very High Field EPR (conveniently, also abbreviated as VHF EPR) has blossomed during the past decade, especially after the original pioneering work of Ya. S. Lebedev and his group at the Institute of Chemical Physics, Russian Academy of Sciences in Moscow. Although Lebedev suffered heavily under the economic constraints of the communist Soviet Union and then succumbed to cancer at the peak of his scientific career, his groundbreaking work from the 1970's is still considered today to be the 'gold standard' by researchers practicing EPR at high magnetic fields. A stimulus for the production of this book is the legacy of Yakov Levedev in his students now residing in academic positions in the US and elsewhere. The aim of this book is to highlight the state of this growing field. This is an attempt to cover the full scope of VHF EPR in a single volume. The idea for this volume came to the editors at the 2001 Rocky Mountain Analytical Conference during the 24th International EPR Symposium chaired by Sandra and Gareth Eaton. VHF EPR was presented as an independent research field at a workshop organized by LC BruneI and supported by the National High Magnetic Field Laboratory, a National Science Foundation funded facility at Florida State University.

Download or read book Pseudomorphic HEMT Technology and Applications written by R.L. Ross and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHEMT devices and their incorporation into advanced monolithic integrated circuits is the enabling technology for modern microwave/millimeter wave system applications. Although still in its infancy, PHEMT MIMIC technology is already finding applications in both military and commercial systems, including radar, communication and automotive technologies. The successful team in a globally competitive market is one in which the solid-state scientist, circuit designer, system engineer and technical manager are cognizant of those considerations and requirements that influence each other's function. This book provides the reader with a comprehensive review of PHEMT technology, including materials, fabrication and processing, device physics, CAD tools and modelling, monolithic integrated circuit technology and applications. Readers with a broad range of specialities in one or more of the areas of materials, processing, device physics, circuit design, system design and marketing will be introduced quickly to important basic concepts and techniques. The specialist who has specific PHEMT experience will benefit from the broad range of topics covered and the open discussion of practical issues. Finally, the publication offers an additional benefit, in that it presents a broad scope to both the researcher and manager, both of whom must be aware and educated to remain relevant in an ever-expanding technology base.

Download or read book Solutions and Applications of Scattering Propagation Radiation and Emission of Electromagnetic Waves written by Ahmed Kishk and published by BoD – Books on Demand. This book was released on 2012-11-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a wide range of different topics related to analytical as well as numerical solutions of problems related to scattering, propagation, radiation, and emission in different medium are discussed. Design of several devices and their measurements aspects are introduced. Topics related to microwave region as well as Terahertz and quasi-optical region are considered. Bi-isotropic metamaterial in optical region is investigated. Interesting numerical methods in frequency domain and time domain for scattering, radiation, forward as well as reverse problems and microwave imaging are summarized. Therefore, the book will satisfy different tastes for engineers interested for example in microwave engineering, antennas, and numerical methods.

Download or read book Aperture Antennas for Millimeter and Sub Millimeter Wave Applications written by Artem Boriskin and published by Springer. This book was released on 2017-09-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technology of millimetre waves and Terahertz (THz) antennas. It highlights the importance of moderate and high-gain aperture antennas as key devices for establishing point-to-point and point-to-multipoint radio links for far-field and near-field applications, such as high data-rate communications, intelligent transport, security imaging, exploration and surveillance systems. The book provides a comprehensive overview of the key antenna technologies developed for the mm wave and THz domains, including established ones – such as integrated lens antennas, advanced 2D and 3D horn antennas, transmit and reflect arrays, and Fabry-Perot antennas – as well as emerging metasurface antennas for near-field and far-field applications. It describes the pros and cons of each antenna technology in comparison with other available solutions, a discussion supplemented by practical examples illustrating the step-by-step implementation procedures for each antenna type. The measurement techniques available at these frequency ranges are also presented to close the loop of the antenna development cycle. In closing, the book outlines future trends in various antenna technologies, paving the way for further developments. Presenting content originating from the five-year ESF research networking program ‘Newfocus’ and co-authored by the most active and highly cited research groups in the domain of mm- and sub-mm-wave antenna technologies, the book offers a valuable guide for researchers and engineers in both industry and academia.

Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.

Download or read book Additive Manufacturing with Metals written by Sanjay Joshi and published by Springer Nature. This book was released on 2023-12-29 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and reference provides a comprehensive treatment of additive manufacturing (AM) for metals, including design and digital work flows, process science and reliability, metallic systems, quality assurance, and applications. The book is rooted in the fundamental science necessary to develop and understand AM technologies, as well as the application of engineering principles covering several disciplines to successfully exploit this important technology. As additive manufacturing of metals is the fastest growing subset of this transformative technology, with the potential to make the widest impact to industrial production, Metals Additive Manufacturing: Design, Processes, Materials, Quality Assurance, and Applications is ideal for students in a range of engineering disciplines and practitioners working in aerospace, automotive, medical device manufacturing industries.

Download or read book 3d virtual histology of neuronal tissue by propagation based x ray phase contrast tomography written by Mareike Töpperwien and published by Göttingen University Press. This book was released on 2018 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deciphering the three-dimensional (3d) cytoarchitecture of neuronal tissue is an important step towards understanding the connection between tissue function and structure and determining relevant changes in neurodegenerative diseases. The gold standard in pathology is histology, in which the tissue is examined under a light microscope after serial sectioning and subsequent staining. It is an invasive and labor-intensive technique which is prone to artifacts due to the slicing procedure. While it provides excellent results on the 2d slices, the 3d anatomy can only be determined after aligning the individual sections, leading to a non-isotropic resolution within the tissue. X-ray computed tomography (CT) offers a promising alternative due to its potential resolution and large penetration depth which allows for non-invasive imaging of the sample's 3d density distribution. In classical CT, contrast formation is based on absorption of the x-rays as they pass through the sample. However, weakly absorbing samples like soft tissue from the central nervous system give nearly no contrast. By exploiting the much stronger phase shifts for contrast formation, which the sample induces in a (partially) coherent wavefront, it can be substantially increased. During free-space propagation behind the sample, these phase shifts are converted to a measurable intensity image by interference of the disturbed wave fronts. In this thesis, 3d virtual histology is performed by means of propagation-based x-ray phase-contrast tomography on tissue from the central nervous system of humans and mice. A combination of synchrotron-based and laboratory setups is used to visualize the 3d density distribution on varying lengths scales from the whole organ down to single cells. By comparing and optimizing different preparation techniques and phase-retrieval approaches, even sub-cellular resolution can be reached in mm-sized tissue blocks. The development of an automatic cell segmentation workflow provides access to the 3d cellular distribution within the tissue, enabling the quantification of the cellular arrangement and allowing for extensive statistical analysis based on several thousands to millions of cells. This paves the way for biomedical studies aimed at changes in cellular distribution, e.g., in the course of neurodegenerative diseases such as multiple sclerosis, Alzheimer's disease or ischemic stroke.