Download or read book Quantitative Plif Imaging in High Pressure Combustion written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-11-06 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report for a research project aimed at developing planar laser-induced fluorescence (PLIF) techniques for quantitative 2-D species imaging in fuel-lean, high-pressure combustion gases, relevant to modem aircraft gas turbine combustors. The program involved both theory and experiment. The theoretical activity led to spectroscopic models that allow calculation of the laser-induced fluorescence produced in OH, NO and 02 for arbitrary excitation wavelength, pressure, temperature, gas mixture and laser linewidth. These spectroscopic models incorporate new information on line- broadening, energy transfer and electronic quench rates. Extensive calculations have been made with these models in order to identify optimum excitation strategies, particularly for detecting low levels (ppm) of NO in the presence of large 02 mole fractions (10% is typical for the fuel-lean combustion of interest). A promising new measurement concept has emerged from these calculations, namely that excitation at specific wavelengths, together with detection of fluorescence in multiple spectral bands, promises to enable simultaneous detection of both NO (at ppm levels) and 02 or possibly NO, 02 and temperature. Calculations have been made to evaluate the expected performance of such a diagnostic for a variety of conditions and choices of excitation and detection wavelengths. The experimental effort began with assembly of a new high-pressure combustor to provide controlled high-temperature and high-pressure combustion products. The non-premixed burner enables access to postflame gases at high temperatures (to 2000 K) and high pressures (to 13 atm), and a range of fuel-air equivalence ratios. The chamber also allowed use of a sampling probe, for chemiluminescent detection of NO/NO2, and thermocouples for measurement of gas temperature. Experiments were conducted to confirm the spectroscopic models for OH, NO and 02. Hanson, R. K. Glenn Research Center...
Download or read book Optical Metrology for Fluids Combustion and Solids written by Carolyn Mercer and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Metrology for Fluids, Combustion and Solids is the first practical handbook that presents the assemblage of the techniques necessary to provide a basic understanding of optical measurement for fluids, combustion, and solids. The use of light as a measurement tool has grown over the past twenty years from a narrowly specialized activity to a mainstay of modern research today. Until recently, the knowledge that could be extracted from the light interaction of light with physical objects was limited to specialized activities. The invention of the laser, the computer and microelectronics has enabled a measurement revolution such that virtually every parameter of engineering interest can be measured using the minimally intrusive properties of light. The authors of this book's chapters are leaders in this revolution. They work on the front lines of research in government, industry, and universities, inventing yet more ways to harness the power of light for the generation of knowledge.
Download or read book NASA s University Program Active Projects written by and published by . This book was released on with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In situ Spectroscopic Techniques at High Pressure written by Andreas Braeuer and published by Elsevier. This book was released on 2015-12-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: In situ Spectroscopic Techniques at High Pressure provides a comprehensive treatment of in-situ applications of spectroscopic techniques at high pressure and their working principles, allowing the reader to develop a deep understanding of which measurements are accessible with each technique, what their limitations are, and for which application each technique is best suited. Coverage is also given to the instrumental requirements for these applications, with respect to the high pressure instrumentation and the spectroscopic components of the equipment. The pedagogical style of the book is supplemented by the inclusion of "study questions" which aim to make it useful for graduate-level courses. - Bridges the gap between supercritical fluid science/technology and in-situ spectroscopic techniques - Provides a powerful guide to applying spectroscopic techniques as gainful sensors at high pressure - Highlights the influence of a high pressure environment and high pressure equipment on spectroscopic techniques - Presents a deep understanding of which measurements are accessible with each technique, what their limitations are, and for which application each technique is best suited
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Process Imaging For Automatic Control written by David M. Scott and published by CRC Press. This book was released on 2018-10-03 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industrial processes and their corresponding control models increase in complexity, the data provided by traditional point sensors is no longer adequate to ensure product quality and cost-effective operation. Process Imaging for Automatic Control demonstrates how in-process imaging technologies surpass the limitations of traditional monitoring systems by providing real-time multidimensional measurement and control data. Combined with suitable data extraction and control schemes, such systems can optimize the performance of a wide variety of industrial processes. Contributed by leading international experts, Process Imaging for Automatic Control offers authoritative, comprehensive coverage of this new area of process control technology, including: Basic goals of process modeling and their application to automatic control Direct imaging devices and applications, such as machine vision and spatial measurement of flow velocity, pressure, shear, pH, and temperature Various techniques, hardware implementations, and image reconstruction methods for process tomography Image enhancement and restoration State estimation methods State space control system models, control strategies, and implementation issues Five chapters devoted to case studies and advanced applications From theory to practical implementation, this book is the first to treat the entire range of imaging techniques and their application to process control. Supplying broad coverage with more than 270 illustrations and nearly 700 cited references, it presents an accessible introduction to this rapidly growing, interdisciplinary technology.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1998-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion written by Maximilian Lackner and published by John Wiley & Sons. This book was released on 2013-07-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion, the process of burning, is defined as a chemical reaction between a combustible reactant (the fuel) and an oxidizing agent (such as air) in order to produce heat and in most cases light while new chemical species (e.g., flue gas components) are formed. This book covers a gap on the market by providing a concise introduction to combustion. Most of the other books currently available are targeted towards the experienced users and contain too many details and/or contain knowledge at a fairly high level. This book provides a brief and clear overview of the combustion basics, suitable for beginners and then focuses on practical aspects, rather than theory, illustrated by a number of industrial applications as examples. The content is aimed to provide a general understanding of the various concepts, techniques and equipment for students at all level as well as practitioners with little or no prior experience in the field. The authors are all international experts in the field of combustion technology and adopt here a clear didactic style with many practical examples to cover the most common solid, liquid and gaseous fuels. The associated environmental impacts are also discussed so that readers can develop an understanding of the major issues and the options available for more sustainable combustion processes. With a foreword by Katharina Kohse-Hoinghaus
Download or read book Transport Phenomena In Combustion written by SH Chan and published by Taylor & Francis. This book was released on 2024-09-06 with total page 1862 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set presents the proceedings from the 8th International Symposium on Transport Phenomena in Combustion. There are more than 150 chapters that provide an extensive review of topics such as complete numerical simulation of combustion and heat transfer in furnaces and boilers, the interaction of combustion and heat transfer in porous media for low emission, high efficiency applications, industrial combustion technology, experimental and diagnostic methods and active combustion control, and fire research, internal combustion engine, Nox and soot emission.
Download or read book Planar Imaging of Hydroxyl in a High Temperature High Pressure Combustion Facility written by and published by . This book was released on 1995 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow and Combustion in Reciprocating Engines written by C. Arcoumanis and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of combustion processes in automotive engines is a key factor in reducing fuel consumption. This book, written by eminent university and industry researchers, investigates and describes flow and combustion processes in diesel and gasoline engines.
Download or read book Laser Technology and its Applications written by Yufei Ma and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has become more and more important in scientific research and industrial applications. Now, the laser wavelength can cover the range from ultraviolet to terahertz and output laser performance has significantly progressed in recent years. This book is focused on the advanced diode laser, fiber laser, and their applications in laser ablation, laser-introduced fluorescence, and laser treatment. The advantages of laser technology are shown comprehensively.
Download or read book Applied Combustion Diagnostics written by KoHse-HoingHaus and published by Taylor & Francis US. This book was released on 2002-04-26 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measurement schemes; and engineers, who know combustion systems and processes. This book assists in providing guidance for the planning of combustion experiments, in judging research strategies and in conceiving new ideas for combustion research. It provides a snapshot of the available diagnostic methods and thier typical applications from the perspective of leading experts in the field.
Download or read book 30th AIAA ASME SAE ASEE Joint Propulsion Conference written by and published by . This book was released on 1994 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 41st AIAA Aerospace Sciences Meeting Exhibit written by and published by . This book was released on 2003 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
