Download or read book Statistical Process Control and Quality Improvement written by Gerald Smith and published by Macmillan College. This book was released on 1995 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Process Control for Real World Applications written by William A. Levinson and published by CRC Press. This book was released on 2010-12-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The normal or bell curve distribution is far more common in statistics textbooks than it is in real factories, where processes follow non-normal and often highly skewed distributions. Statistical Process Control for Real-World Applications shows how to handle non-normal applications scientifically and explain the methodology to suppliers and custom
Download or read book Statistical Process Control written by Robert James Oakland and published by Routledge. This book was released on 2018-10-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The business, commercial and public-sector world has changed dramatically since John Oakland wrote the first edition of Statistical Process Control – a practical guide in the mid-eighties. Then people were rediscovering statistical methods of ‘quality control’ and the book responded to an often desperate need to find out about the techniques and use them on data. Pressure over time from organizations supplying directly to the consumer, typically in the automotive and high technology sectors, forced those in charge of the supplying production and service operations to think more about preventing problems than how to find and fix them. Subsequent editions retained the ‘took kit’ approach of the first but included some of the ‘philosophy’ behind the techniques and their use. The theme which runs throughout the 7th edition is still processes - that require understanding, have variation, must be properly controlled, have a capability, and need improvement - the five sections of this new edition. SPC never has been and never will be simply a ‘took kit’ and in this book the authors provide, not only the instructional guide for the tools, but communicate the management practices which have become so vital to success in organizations throughout the world. The book is supported by the authors' extensive and latest consulting work within thousands of organisations worldwide. Fully updated to include real-life case studies, new research based on client work from an array of industries, and integration with the latest computer methods and Minitab software, the book also retains its valued textbook quality through clear learning objectives and end of chapter discussion questions. It can still serve as a textbook for both student and practicing engineers, scientists, technologists, managers and for anyone wishing to understand or implement modern statistical process control techniques.
Download or read book Introduction to Statistical Process Control written by Peihua Qiu and published by CRC Press. This book was released on 2013-10-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major tool for quality control and management, statistical process control (SPC) monitors sequential processes, such as production lines and Internet traffic, to ensure that they work stably and satisfactorily. Along with covering traditional methods, Introduction to Statistical Process Control describes many recent SPC methods that improve upon
Download or read book Introduction to Statistical Quality Control written by Christina M. Mastrangelo and published by Wiley. This book was released on 1991 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded, this Second Edition continues to explore the modern practice of statistical quality control, providing comprehensive coverage of the subject from basic principles to state-of-the-art concepts and applications. The objective is to give the reader a thorough grounding in the principles of statistical quality control and a basis for applying those principles in a wide variety of both product and nonproduct situations. Divided into four parts, it contains numerous changes, including a more detailed discussion of the basic SPC problem-solving tools and two new case studies, expanded treatment on variable control charts with new examples, a chapter devoted entirely to cumulative-sum control charts and exponentially-weighted, moving-average control charts, and a new section on process improvement with designed experiments.
Download or read book Statistical Process Control in Industry written by R.J. Does and published by Springer Science & Business. This book was released on 1999-01-31 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade interest in quality management has greatly increased. One of the central elements of Total Quality Management is Statistical Process Control, more commonly known as SPC. This book describes the pitfalls and traps which businesses encounter when implementing and assuring SPC. Illustrations are given from practical experience in various companies. The following subjects are discussed: implementation of SPC, activity plan for achieving statistically controlled processes, statistical tools, and lastly, consolidation and improvement of the results. Also, an extensive checklist is provided with which a business can determine to what extent it has succeeded in the actual application of SPC. Audience: This volume is written for companies which are going to implement SPC, or which need a new impetus in order to get SPC properly off the ground. It will be of interest in particular to researchers whose work involves statistics and probability, production, operation and manufacturing management, industrial organisation and mathematical and quantitative methods. It will also appeal to specialists in engineering and management, for example in the electronic industry, discrete parts industry, process industry, automotive and aircraft industry and food industry.
Download or read book Statistical Process Control for Managers written by Victor E. Sower and published by Business Expert Press. This book was released on 2014-08-31 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you have been frustrated by very technical statistical process control (SPC) training materials, then this is the book for you. This book focuses on how SPC works and why managers should consider using it in their operations. It provides you with a conceptual understanding of SPC so that appropriate decisions can be made about the benefits of incorporating SPC into the process management and quality improvement processes. Today, there is little need to make the necessary calculations by hand, so the author utilizes Minitab and NWA Quality Analyst—two of the most popular statistical analysis software packages on the market. Links are provided to the home pages of these software packages where trial versions may be downloaded for evaluation and trial use. The book also addresses the question of why SPC should be considered for use, the process of implementing SPC, how to incorporate SPC into problem identification, problem solving, and the management and improvement of processes, products, and services.
Download or read book Statistical Process Control for the Food Industry written by Sarina A. Lim and published by John Wiley & Sons. This book was released on 2019-02-25 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment for implementing Statistical Process Control (SPC) in the food industry This book provides managers, engineers, and practitioners with an overview of necessary and relevant tools of Statistical Process Control, a roadmap for their implementation, the importance of engagement and teamwork, SPC leadership, success factors of the readiness and implementation, and some of the key lessons learned from a number of food companies. Illustrated with numerous examples from global real-world case studies, this book demonstrates the power of various SPC tools in a comprehensive manner. The final part of the book highlights the critical challenges encountered while implementing SPC in the food industry globally. Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers explores the opportunities to deliver customized SPC training programs for local food companies. It offers insightful chapter covering everything from the philosophy and fundamentals of quality control in the food industry all the way up to case studies of SPC application in the food industry on both the quality and safety aspect, making it an excellent "cookbook" for the managers in the food industry to assess and initiating the SPC application in their respective companies. Covers concise and clear guidelines for the application of SPC tools in any food companies' environment Provides appropriate guidelines showing the organizational readiness level before the food companies adopt SPC Explicitly comments on success factors, motivations, and challenges in the food industry Addresses quality and safety issues in the food industry Presents numerous, global, real-world case studies of SPC in the food industry Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers can be used to train upper middle and senior managers in improving food quality and reducing food waste using SPC as one of the core techniques. It's also an excellent book for graduate students of food engineering, food quality management and/or food technology, and process management.
Download or read book Introduction to Statistical Quality Control written by Douglas C. Montgomery and published by John Wiley & Sons. This book was released on with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is about the use of modern statistical methods for quality control and improvement. It provides comprehensive coverage of the subject from basic principles to state-of-the-art concepts. and applications. The objective is to give the reader a sound understanding of the principles and the basis for applying them in a variety of situations. Although statistical techniques are emphasized. throughout, the book has a strong engineering and management orientation. Extensive knowledge. of statistics is not a prerequisite for using this book. Readers whose background includes a basic course in statistical methods will find much of the material in this book easily accessible"--
Download or read book Measuring the Software Process written by William A. Florac and published by Addison-Wesley Professional. This book was released on 1999-07-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "While it is usually helpful to launch improvement programs, many such programs soon get bogged down in detail. They either address the wrong problems, or they keep beating on the same solutions, wondering why things don't improve. This is when you need an objective way to look at the problems. This is the time to get some data." Watts S. Humphrey, from the Foreword This book, drawing on work done at the Software Engineering Institute and other organizations, shows how to use measurements to manage and improve software processes. The authors explain specifically how quality characteristics of software products and processes can be quantified, plotted, and analyzed so the performance of software development activities can be predicted, controlled, and guided to achieve both business and technical goals. The measurement methods presented, based on the principles of statistical quality control, are illuminated by application examples taken from industry. Although many of the methods discussed are applicable to individual projects, the book's primary focus is on the steps software development organizations can take toward broad-reaching, long-term success. The book particularly addresses the needs of software managers and practitioners who have already set up some kind of basic measurement process and are ready to take the next step by collecting and analyzing software data as a basis for making process decisions and predicting process performance. Highlights of the book include: Insight into developing a clear framework for measuring process behavior Discussions of process performance, stability, compliance, capability, and improvement Explanations of what you want to measure (and why) and instructions on how to collect your data Step-by-step guidance on how to get started using statistical process control If you have responsibilities for product quality or process performance and you are ready to use measurements to manage, control, and predict your software processes, this book will be an invaluable resource.
Download or read book Measuring Quality Improvement in Healthcare written by Raymond G. Carey and published by Quality Press. This book was released on 2001-09-25 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ground-breaking book addresses the critical, growing need among health care administrators and practitioners to measure the effectiveness of quality improvement efforts. Written by respected healthcare quality professionals, Measuring Quality Improvement in Healthcare covers practical applications of the tools and techniques of statistical process control (SPC), including control charts, in healthcare settings. The authors' straightforward discussions of data collection, variation, and process improvement set the context for the use and interpretation of control charts. Their approach incorporates "the voice of the customer" as a key element driving the improvement processes and outcomes. The core of the book is a set of 12 case studies that show how to apply statistical thinking to health care process, and when and how to use different types of control charts. The practical, down-to-earth orientation of the book makes it accessible to a wide readership. "Only authors who have used statistics and control charts to solve real-world healthcare problems could have written a book so practical and timely." - Barry S. Bader, Publisher The Quality Letter for Healthcare Leaders "Many clinicians and other healthcare leaders underestimate the great contributions that better statistical thinking could make toward reducing costs and improving outcomes. This fascinating and timely book is a fine guide for getting started." - Donald M. Berwick, M.D. President and CEO, Institute for Healthcare Improvement Associate Professor of Pediatrics, Harvard Medical School Contents: Planning Your CQI Journey, Preparing to Collect Data, Data Collection, Understanding Variation, Using Run and Control Charts to Analyze Process Variation, Control Chart Case Studies, Developing Improvement Strategies, Using Patient Surveys for CQI, Formulas for Calculating Control Limits
Download or read book Statistical Process Control in Manufacturing Practice written by Fred W. Kear and published by CRC Press. This book was released on 2020-11-25 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the importance of understanding and reducing process variation to achieve quality manufacturing performance, this work establishes how statistical process control (SPC) provides powerful tools for measuring and regulating manufacturing processes. It presents information derived from time-tested applications of SPC techniques at on-site process situations in manufacturing. It is designed to assist manufacturing organizations in explaining and implementing successful SPC programmes.
Download or read book Mastering Statistical Process Control written by Tim Stapenhurst and published by Routledge. This book was released on 2013-05-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering Statistical Process Control shows how to understand business or process performance more clearly and more effectively. This practical book is based on a rich and varied selection of case studies from across industry and commerce, including material from the manufacturing, extractive and service sectors. It will enable readers to understand how SPC can be used to maximum effect, and will deliver more effective monitoring, control and improvement in systems, processes and management. The common obstacle to successful use of SPC is getting bogged down with control charts, forgetting that visual representation of data is but a tool and not an end in itself. Mastering SPC demonstrates how statistical tools are applied and used in reality. This is a book that will open up the power of SPC for many: managers, quality professionals, engineers and analysts, as well as students, will welcome the clarity and explanation that it brings to understanding the use and benefit of SPC in a wide range of engineering, production and service situations. Key case studies include using SPC to: · Measure quality and human factors · Monitor process performance accurately over long periods · Develop best-practice benchmarks using control charts · Maximise profitability of fixed assets · Improve customer service and satisfaction
Download or read book Statistical Methods for SPC and TQM written by D Bissell and published by CRC Press. This book was released on 1994-05-15 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Methods for SPC and TQM sets out to fill the gap for those in statistical process control (SPC) and total quality management (TQM) who need a practical guide to the logical basis of data presentation, control charting, and capability indices. Statistical theory is introduced in a practical context, usually by way of numerical examples. Several methods familiar to statisticians have been simplified to make them more accessible. Suitable tabulations of these functions are included; in several cases, effective and simple approximations are offered. Contents Data Collection and Graphical Summaries Numerical Data Summaries-Location and Dispersion Probability and Distribution Sampling, Estimation, and Confidence Sample Tests of Hypothesis; "Significance Tests" Control Charts for Process Management and Improvement Control Charts for Average and Variation Control Charts for "Single-Valued" Observations Control Charts for Attributes and Events Control Charts: Problems and Special Cases Cusum Methods Process Capability-Attributes, Events, and Normally Distributed Data Capability; Non-Normal Distributions Evaluating the Precision of a Measurement System (Gauge Capability) Getting More from Control Chart Data SPC in "Non-Product" Applications Appendices
Download or read book Statistical Process Control for the FDA Regulated Industry written by Manuel E. Pena-Rodriguez and published by Quality Press. This book was released on 2013-04-11 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is to understand and apply the different SPC tools in a company regulated by the Food and Drug Administration (FDA): those that manufacture pharmaceutical products, biologics, medical devices, food, cosmetics, and so on. The book is not intended to provide an intensive course in statistics; instead, it is intended to provide a how-to guide about the application of the diverse array of statistical tools available to analyze and improve the processes in an organization regulated by FDA. This book is aimed at engineers, scientists, analysts, technicians, managers, supervisors, and all other professionals responsible to measure and improve the quality of their processes. Although the examples and case studies presented throughout the book are based on situations found in an organization regulated by FDA, the book can also be used to understand the application of those tools in any type of industry. Readers will obtain a better understanding of some of the statistical tools available to control their processes and be encouraged to study, with a greater level of detail, each of the statistical tools presented throughout the book. The content of this book is the result of the authors almost 20 years of experience in the application of statistics in various industries, and his combined educational background of engineering and law that he has used to provide consulting services to dozens of FDA-regulated organizations.
Download or read book Statistical Process Control in Automated Manufacturing written by Bert Keats and published by CRC Press. This book was released on 2020-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to statistical process control in automated manufacturing and suggests implementation strategies. It focuses on time series applications in statistical process control and explores the role of knowledge-based systems in process control.
Download or read book Statistical Method from the Viewpoint of Quality Control written by Walter Andrew Shewhart and published by Courier Corporation. This book was released on 1986-01-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Important text offers lucid explanation of how to regulate variables and maintain control over statistics in order to achieve quality control over manufactured products, crops and data. Topics include statistical control, establishing limits of variability, measurements of physical properties and constants, and specification of accuracy and precision. First inexpensive paperback edition.
